How to properly deflate an air mattress.

Today, more and more people can find air mattresses. They are easy to use and can help in various situations, for example, at home it can replace a sleeping place, in nature it is a great opportunity to relax with your loved ones, and at sea - a mattress can be used as a swimming tool. In addition, it takes up very little space when folded.

Features when choosing a product

Today you can find a variety of models of air mattresses. . They differ according to the following criteria:

1. Dimensions (single, one and a half, double, European);
2. Height (13-56 cm);
3. Colors.

The main points when choosing a product is its quality. A quality product has the following advantages:

As a rule, in modern products mechanical pump included(manual or foot), which allows without special efforts bring it into proper shape. It is very simple, because it is enough to embed the device in the valve and in just a few minutes you can enjoy a comfortable rest.

However, it may well be that the pump is not present or is completely broken. In fact, there are many improvised means that will help pump up the mattress without much difficulty. Of course, it is more convenient when there are built-in valves. So, there are several ways to help inflate a bed without a pump:

Regardless of the method you choose, remember that you should not inflate the mattress until it is full, it is better if it is filled to 85% of the total volume. Thanks to this, you will avoid the possibility of seam divergence and extend the service life.

Moreover, there are "bad tips" for inflating the product:

• With the help of your lungs, filling the product with air with your mouth. If this is done alternately by two men, then the process itself will take about 15-20 minutes. However, this is not recommended, as this method can harm health.
• The exhaust pipe of the car helps to pump air into the product. Connect the adapter to the valve and you can start the inflation process. This is not worth doing, because the exhaust gas, once inside the product, begins to destroy it.

How to properly deflate a bed

When inflating, you can use a special pump or some improvised means, but in order to lower the mattress, you need to create certain conditions and make a little effort. Regardless of the brand of the product, the principle and rules of how to blow off a bestway, Intex (Intex) or any other mattress are the same.

First of all consider those factors, the presence of which will help to properly lower the product:

• Smooth surface.
• No sharp objects.
• Lack of heating appliances.
• It is strictly forbidden to use automotive compressors or other devices where high pressure is present.

Inflatable furniture (in particular, mattresses) is perhaps the most popular attribute for most people today. It is used everywhere at home as a bed for sleeping, they take it with them to nature and, of course, you can’t do without mattresses when traveling by sea.

The convenience of such mattresses is that they do not take up much space, they are easy to transport, and the inflation process takes a few minutes. However, everything does not always end with the purchase of an inflatable device, most often it is also worth worrying about the presence of a special pump in order to inflate the product.

It's great when the models are equipped with built-in pumps that allow you to inflate "without leaving the cash register". But what if the pump is simply missing, how to inflate a mattress without a pump?

The first thing that comes to mind is to try to do the procedure on your own. Try to inflate the product with your mouth if you do not have a pump, and you are a representative of the stronger sex of an athletic build. However, if you care about your health, especially your own lungs, then you should look for more safe ways. How to inflate an Intex mattress, perhaps the most frequently asked question faced by users.

Intex products have long deserved well-deserved popularity among consumers. They are compact, comfortable to use and quite durable. Such an accessory can be taken on a trip to the sea during the summer vacation or used on dacha territory for entertainment or recreation. Intex is not whimsical in care, does not require special maintenance during the storage period, and is also easily cleaned and has a high-quality coating.

Having made a purchase, you should consider how to inflate an Intex mattress. For this purpose, it is easier to use a conventional pump. How to inflate a mattress with a pump? If during the period of use it is possible to provide uninterrupted access to the electrical network or car, the electric pump will become best solution, or a foot pump is required.

The mattress is inflated quite smoothly, using the connection of the pump tube to the valve. It is necessary to make movements, continuously exercising control over the control of the elasticity of the product, so that excessive "bloat" does not occur. What makes the foot pump convenient is that it can be taken on the road and it does not require constant access to the mains.

How to inflate a mattress if there is no pump?

If you are at home, then this dilemma can be resolved using a simple vacuum cleaner, using similar to a compressor. By connecting a special nozzle to the mattress through the outlet of the vacuum cleaner, you can fill it with air, spending literally no more than 10 minutes. However, if you are away from home, then this method cannot be applied. In any case, you should not try to inflate the model with your mouth, as this is not a ball and more powerful efforts are required here.

Try filling the item with a vacuum cleaner such as the Rainbow. With great suction power, this family item not only can handle homework. Previously, craftsmen bleached the walls of the premises using nozzles from vacuum cleaners. And today it is quite possible to use a vacuum cleaner instead of a compressor. Nozzles for vacuum cleaners will help in inflating not only the mattress, but also all kinds of balls and rubber toys. A thin nozzle is connected to the outlet on the vacuum cleaner. You will receive a perfectly inflated product in just a few minutes.

Watch the video how to inflate inflatable mattress.

Remember that the product should be inflated based on the weight and number of people who will use it.

When not big weight, the mattress needs to be pumped up a little more. However, with a large weight, you should not pump the product to the limit. It is recommended to inflate within 85%.

When carrying out the inflation process itself, it is necessary to control the level of rigidity and elasticity. As soon as the wrinkles disappear and the mattress becomes tight, the process can be stopped.

One third of the total is perfect option filling. If you overdo it, then its seams can simply burst.

Method for the brave

If you are in nature or other open space, then there is a way to inflate the product using large plastic bags. What needs to be done. It is necessary to take air into a large bag, put the bag on the hole in the mattress and literally lie on it, as if blowing a portion of air into the mattress. This manipulation must be done several times. Craftsmen claim that in this way you can do without pumps.

First of all, you should not use high-pressure pumps or compressors for cars for pumping. Not that product has the ability to simply burst. Do not allow the use of a hair dryer, as hot air will only hurt.

Inflatable models absolutely in all cases require careful handling. It will be necessary to protect such products from objects with pointed ends. It is not recommended to stand on such products with your feet.

• operating from electricity;
• manual,
• foot.

If you follow all the tips noted, the mattress will be able to serve for a long time, and the inflation process will not cause inconvenience and take a lot of time.

Instead of a conclusion

As you know, it is better to prevent problems than to solve them later. Therefore, before purchasing air mattresses, you should take care in advance about the process of filling the device with air. Buy only quality models, where the kit already has a built-in pump. It is this option that will allow you not to resort to improvised means that can only damage the product.

You can see photos of models with pumps here.

How to inflate a mattress without a pump?

Along with traditional furniture options, an inflatable version is quite popular today, successfully used not only at home, but also on country trips, hiking trips and under other circumstances. To fully enjoy the comfort of inflatable furniture, you need not only to purchase it. You also need to take care of the presence of a pump.

Some models of inflatable furniture have a built-in pump option, thanks to which the process of giving the mattress the necessary forms will pass without much difficulty. If the device is not available, then you can find an alternative solution to the question of how to inflate a mattress without a pump in a house or apartment. But if the absence of sediment is found in the bosom of nature, then the inflatable furniture will remain in its original state in the form of a pile of rubberized material.

What can be done?

In order for the mattress to acquire the desired shape without a specialized pump, you can first use the capabilities of your own lungs. That is, in the presence of a significant volume and physical strength, we inflate the mattress with our mouth. In the absence of the above criteria, as well as those who take care of their own lungs and eyes, in which blood vessels can burst from stress, it is worth using the help of a household vacuum cleaner.

For example, you can take the Rainbow brand of household cleaning equipment and, thanks to its power, inflate the necessary air mattress. The unconventional application of this device, characterized by a significant suction power, has been known for a long time.

It is worth remembering that in Soviet times When it was possible to buy locally produced vacuum cleaners on domestic shelves, craftsmen used this equipment not only for its intended purpose. But, for example, for whitewashing, at the same time, specialized nozzles were fitted to the pump. Today, this mechanism can successfully perform the functions of a compressor.

If you use the Rainbow brand pump instead of the built-in device for inflatable furniture. As well as the nozzles attached to it, then there will be no problems with balls, balls, rubber toys and, of course, sleeping air mattresses. All you need to do is choose a thin nozzle and attach it to the vacuum cleaner. Where there is an air outlet. If everything is done correctly, then it will take a couple of minutes to pump up not only a ball or a toy, but even a mattress on which it is supposed to spend a comfortable sleep time.

The degree of elasticity of an air mattress inflated with a third-party vacuum cleaner depends on several criteria. It is necessary to take into account not only the number of people who are going to comfortably rest on it, but also their total weight. In the event that the number of people is not large, and their weight is insignificant, then the degree of inflation of the mattress can be high.

If there are a lot of people and, accordingly, the weight will be expressed in significant digital indicators. Then it is not 100% worth filling inflatable furniture with air. Experts say that resting on an air mattress with a significant number of people will be characterized by comfortable performance when it is only 80-85 percent inflated.

In order for inflated furniture to be comfortable and not rigid, the process of using a vacuum cleaner to pump air into it must be controlled. Management of the level of rigidity must begin at the moment when the mattress area acquires the first signs of elasticity. That is, when “wrinkles” disappear from the surface of the furniture.

At this point, it is worth stopping the vacuum cleaner. It must be remembered that the recommended degree of filling of the mattress should not exceed ¾ of the volume of the balloon. If this condition is left without attention, then anticipation comfortable rest and will remain so. Because under the weight of the bodies, the seams of the mattress are likely to break. Even if they seemed to be the strongest.

If the number of people intending to rest on inflatable furniture does not exceed two, then the filling rates of the mattress in ¾ of its volume should be further reduced. The same principle of filling the mattress should be observed by users if the cylinder has been exposed to direct sunlight for a long period of time. This is necessary because inside the mattress in the sun, the air not only gets very hot, but also expands. Which creates additional pressure on the seams and its base.

A few precautions

Inflatable furniture, including mattresses, requires careful handling. It is required to protect such products from objects with sharp edges. And also from animals that have not only sharp claws, but no less sharp teeth. It is not recommended to step on inflatable products with your feet. You can’t even stand on the mattress with one knee. The process of filling inflatable furniture with air and the reverse process must be carried out with a high degree of care.

• powered by electricity,
• manually,
• with the strength of the legs.

http://matrasec.ru

inflatable upholstered furniture, especially mattresses, is in stable demand. Expensive air mattresses, as a rule, are equipped with a pump (built-in or a separate item). In other cases, the device must be purchased separately. What if the pump is out of order, lost or forgotten, and the product must certainly be pumped up? This situation can take you by surprise, especially if the well-being of a night's rest - yours, guests or relatives - depends on its outcome. How to inflate a mattress without a pump? In fact, this is a solvable problem. Do not panic and despair. Consider how you can get out of the situation!

Where to start

So, how to pump up a mattress without a pump? The first thing that usually comes to mind is using the power of your own lungs. It is quite possible to pump up a small model without involving additional equipment or devices.

Reference! Two adult men will inflate a mattress this way in about 20 minutes. When changing, do not forget to disinfect the valve opening!

However, it should be understood that for one person this is a rather complicated process. Untrained lungs and heart can fail. The result is dizziness and an increase in blood pressure. In addition, only with the help of the lungs it is unlikely that it will be possible to pump the product to the optimal degree of density.

Vacuum cleaner to help

With the help of an ordinary household vacuum cleaner, you can quickly pump up even a large double mattress. But not any vacuum cleaner model is suitable for such a case, but only those that have a reverse function. Some models provide the ability to connect a hose to the outlet. In this case, all that is required is to connect the thin nozzle of the vacuum cleaner to the mattress valve, after which the vacuum cleaner can be turned on. Even if the valve and nozzle of the vacuum cleaner have different diameters and some of the air coming out of the vacuum cleaner will “leave”, this will not prevent you from achieving the desired result.

Note! If the design of the valve does not provide protection against unplanned blowing off, after turning off the vacuum cleaner, close the hole with a plug or cap as soon as possible.

Use a hair dryer

If you're not sure you can inflate your mattress with your lungs and you don't have a back-fed vacuum cleaner, try using a hair dryer. The power of the electric appliance is quite enough to pump up a mattress of any size. As with a vacuum cleaner, choose the narrowest nozzle that matches the diameter of the valve as accurately as possible. For a better "docking" use tape or electrical tape. With its help, you can fix the hair dryer and minimize the loss of air supplied.

big package

Quite an original, but working option for pumping up a mattress. It is best to use a strong (and without fail, undamaged) plastic bag. This procedure can be carried out only with the participation of two people. To do this, you need to do the following:

1. Open the valve on the mattress.
2. Fill the bag with air and quickly close it.
3. We adjust the bag under the valve and firmly fix it on the “neck”.
4. Pumped air from the bag into the mattress.

The action should be continued until the desired result is achieved.

How not to inflate a mattress

If you went to nature and only there realized that the pump was out of order or the device was left at home, do not rush to pump the product with exhaust gases. At first glance, this might seem like a great idea. If you pump the product in this way only once, nothing "fatal" will happen. But regular pumping of the mattress with exhaust gases can result in the destruction of the inflatable product.

The fact is that carcinogens have a detrimental effect on the structure of the material from which mattresses are made. In addition, during pumping, the person in charge of the process will inevitably inhale some of the carcinogens, which can be very harmful to health.

Summing up

How to quickly inflate a mattress without a pump at home? The answer is obvious - with a hair dryer or a vacuum cleaner. If you need to do this in nature, you can use a large, durable bag.

And yes, as practice shows, “our” person will not be confused in a situation where you need to pump up a mattress outside the box!

Many people live in small one-room apartments, and this encourages them to do everything to save space. One such economical option is inflatable sleep products, but some people don't know how to deflate an air mattress. It is purchased in place of a bed, but, unlike it, it can be lowered and folded to a remote place, which frees up a lot of space in the room.

What you need to know about an air mattress?

Today there is a large number of different models. When choosing such an air bed, the main criterion is quality. Therefore, before buying, you should pay attention to the properties of the product and customer reviews.

Air beds have many advantages: mobility, compact storage, convenient transportation, for which a cover is included, but most importantly, comfort that is not inferior to relaxing on the sofa. You need to choose a model that will provide a comfortable body position and comfort during rest. Such products can also be used in other areas, for example, they can swim on the sea surface, sunbathe in the sun, lie on fresh air in the shade of trees in the country.

The most common are mattresses with a built-in relief valve that keeps air inside even if the lid is open. These models will be comfortable both at home, and in nature, and at sea. They are universal for a variety of, including extreme, conditions.

How to avoid mistakes when deflating a mattress?

• To properly deflate the product, the product must be laid out on a flat surface.
• In the place where it will be blown away, there should be no sharp objects.
• Electric heaters and heaters with high temperatures should also be removed.
• When operating the product, be careful with sub-zero temperatures, as they can damage its surface.
• Do not use high pressure pumps for deflation, such as a car compressor.

How to properly deflate an air mattress?

To inflate the mattress, they use a special external pump, and in order to blow it off, you need to apply certain forces and create certain conditions. Before proceeding with the procedure, it is necessary to clean the product with a mild soapy solution, but in no case use aggressive cleaners. The surface must dry on its own, without the help of electric heaters or heaters. The same applies to the mattress that was used for swimming - it must also be dried thoroughly.

To start the procedure, you must open the valve and wait until the air descends by itself. In this case, it is forbidden to press on it in anticipation of what will turn out faster - the process will not accelerate, and the product may be damaged. The larger the volume of the air bed, the longer it will take to wait until the air is completely out, but even in this case, you can not press hard.

It is important to use and care for your mattress properly. So, a single air bed can be lowered in 10-20 minutes, but there are difficulties. In the hole through which the air space is pumped, there are special valves that prevent air from escaping under external pressure. To bleed air, you need to open the valve and squeeze it slightly. Thus, the jumper bends, which allows you to blow off faster.

Benefits of a valve mattress

Models and brands air beds are produced with a variety of valves, therefore, when bleeding, you need to take into account the shape of the valve.

• To lower a mattress with a classic valve, you need to open it, press lightly and gradually twist the product.
• In the case when the valve is arranged like a bicycle or car, you need to squeeze it with your fingers from both sides, and the hole will become open for easy air release. In another case, you can use a match by pressing it on the central nipple. It will be convenient to work together here, when one blows off and the other twists.
• Models with a removable valve are the simplest. It is necessary to unscrew the valve entirely, and the air will quickly come out by itself.
• There is an option when you can use the same electric pump that you inflated for downloading. You just need to turn on the "Air release" mode. In this case, do not use a hand pump.

How to deflate an air mattress with a pump?

Inflatable bed pumps are very convenient and practical devices that help in the process of their operation. Buying such frameless furniture, it is recommended to purchase a pump with two modes: for inflating and lowering. Typically, low pressure pumps are used in such cases:

• mechanical (manual, foot) require additional force;
• electric allow you to lower the mattress with one touch of the "Blow air" button.

The main rule of inflation is the regulation of elasticity, the air inside the product should be no more than ¾ of the total volume, otherwise the seams may break and the mattress will burst. If it is pumped, you need to release some air from it.

How to deflate a mattress with a foot pump? To do this, you will need to apply a little less power than when inflated. The pump should be connected to the product and press on the air chamber that fills with air, and then lets it out. A set of mechanical pumps is usually supplemented with small adapters, with the help of which air is pumped out of the product.

With the help of an electric device, the descent occurs through a hose that is inserted into a specially marked hole and connected to an electric pump. It has a "Blowing air" mode, after which the deflation process begins.

An air mattress was invented in order to bring more comfort to everyday life. This comfortable product is applicable for sleeping, swimming and other leisure activities. It is important to know the rules of operation and careful care of it.