How to properly deflate an air mattress? How to use air beds.

An air mattress is an irreplaceable thing on vacation (in a tent, on the sea) or at home. Many use these mattresses as a full bed in the country or as an extra bed for guests. Among the advantages of air mattresses are durability and ease of cleaning, compact storage and no need for special care. You need to know how to inflate a mattress quickly and efficiently - because it may be needed in the most unexpected situation.

Mattress inflation pumps

A mattress is a fairly large and voluminous item. In any case, you can't inflate it with your mouth. The best solution question how to inflate inflatable mattress is the use of a pump. Sometimes the pump may be included - from the same manufacturer. If not, then a low pressure pump is required:

• manual;
• foot;
• electric.

An electric pump is justified if you have constant access to energy - in the house or at least from a car battery. If not, then choose a foot pump.

We inflate the mattress according to the rules

How to inflate an intex mattress? Electric pumps do their job in no time, but the inflation process must be carefully monitored - excess air can easily damage the mattress. Good inflated mattress- elastic and without folds, it should be comfortable - so adjust the stiffness of the bed even when inflating. Ideally, if 3/4 of the mattress is filled with air, but if you plan to use the product in the open sun or for several people, then it is worth inflating even less. If you fill the mattress completely with air, you can provoke tears in even the strongest seams.

Important! Do you want to check the reliability of the mattress? Inflate it and leave it for 12 hours - during this time, the loss of elasticity should not be more than 10%.

What if there is no pump?

There are also situations when you need to inflate the mattress, but there is no pump. It is clear that the strength of one's own lungs is not enough for such a volume, but how to inflate a mattress without a pump?

You can use the vacuum cleaner as a compressor - this requires a special nozzle. It attaches to the outlet of the mattress and fills it with air in just seconds. With the help of this universal device, the question of how to deflate the mattress is also solved.

By the way! If you are in nature and you don’t have a vacuum cleaner, you can use original way- collect the air in a large garbage bag, then fix the edges of the air bag and "put" it on the hole in the mattress. Press the air bag - the air will pass into the mattress.

Blowing off the mattress

To keep the product positive traits as long as possible, you also need to know how to deflate the air mattress correctly. V modern models mattresses, this issue is solved quite simply, because they are equipped with large special valves through which air escapes very quickly. Press lightly on the surface to speed up the release of air, but not too much, as this can damage the seams. You can also use a pump for these purposes - then the process of blowing off the mattress will be very fast and safe.

How to inflate a mattress without a pump?

Along with traditional furniture options, an inflatable version is quite popular today, successfully used not only at home, but also on country trips, hiking trips and under other circumstances. To fully enjoy the comfort of inflatable furniture, you need not only to purchase it. You also need to take care of the presence of a pump.

Some models of inflatable furniture have a built-in pump option, thanks to which the process of giving the mattress the necessary forms will pass without much difficulty. If the device is not available, then you can find an alternative solution to the question of how to inflate a mattress without a pump in a house or apartment. But if the absence of sediment is found in the bosom of nature, then the inflatable furniture will remain in its original state in the form of a pile of rubberized material.

What can be done?

In order for the mattress to acquire the desired shape without a specialized pump, you can first use the capabilities of your own lungs. That is, in the presence of a significant volume and physical strength, we inflate the mattress with our mouth. In the absence of the above criteria, as well as those who take care of their own lungs and eyes, in which blood vessels can burst from stress, it is worth using the help of a household vacuum cleaner.

For example, you can take the Rainbow brand of household cleaning equipment and, thanks to its power, inflate the necessary air mattress. The unconventional application of this device, characterized by a significant suction power, has been known for a long time.

It is worth remembering that in Soviet times When it was possible to buy locally produced vacuum cleaners on domestic shelves, craftsmen used this equipment not only for its intended purpose. But, for example, for whitewashing, at the same time, specialized nozzles were fitted to the pump. Today, this mechanism can successfully perform the functions of a compressor.

If you use the Rainbow brand pump instead of the built-in device for inflatable furniture. As well as the nozzles attached to it, then there will be no problems with balls, balls, rubber toys and, of course, sleeping air mattresses. All you need to do is choose a thin nozzle and attach it to the vacuum cleaner. Where there is an air outlet. If everything is done correctly, then it will take a couple of minutes to pump up not only a ball or a toy, but even a mattress on which it is supposed to spend a comfortable sleep time.

The degree of elasticity of an air mattress inflated with a third-party vacuum cleaner depends on several criteria. It is necessary to take into account not only the number of people who are going to comfortably rest on it, but also their total weight. In the event that the number of people is not large, and their weight is insignificant, then the degree of inflation of the mattress can be high.

If there are a lot of people and, accordingly, the weight will be expressed in significant digital indicators. Then it is not 100% worth filling inflatable furniture with air. Experts say that resting on an air mattress with a significant number of people will be characterized by comfortable performance when it is only 80-85 percent inflated.

In order for inflated furniture to be comfortable and not rigid, the process of using a vacuum cleaner to pump air into it must be controlled. Management of the level of rigidity must begin at the moment when the mattress area acquires the first signs of elasticity. That is, when “wrinkles” disappear from the surface of the furniture.

At this point, it is worth stopping the vacuum cleaner. It must be remembered that the recommended degree of filling of the mattress should not exceed ¾ of the volume of the balloon. If this condition is left without attention, then anticipation comfortable rest and will remain so. Because under the weight of the bodies, the seams of the mattress are likely to break. Even if they seemed to be the strongest.

If the number of people intending to rest on inflatable furniture does not exceed two, then the filling rates of the mattress in ¾ of its volume should be further reduced. The same principle of filling the mattress should be observed by users if the cylinder has been exposed to direct sunlight for a long period of time. This is necessary because inside the mattress in the sun, the air not only gets very hot, but also expands. Which creates additional pressure on the seams and its base.

A few precautions

Inflatable furniture, including mattresses, requires careful handling. It is required to protect such products from objects with sharp edges. And also from animals that have not only sharp claws, but no less sharp teeth. It is not recommended to step on inflatable products with your feet. You can’t even stand on the mattress with one knee. The process of filling inflatable furniture with air and the reverse process must be carried out with a high degree of care.

• powered by electricity,
• manually,
• with the strength of the legs.

http://matrasec.ru

If you go for a walk on Fresh air and someone forgot to pack air compressor, most likely you won't be able to find these handy outdoor tools, how are you going to inflate the mattress through your air channel without using your mouth and shortness of breath and dizziness from hard lung work?
If you are a careful tourist and take garbage bags with you so as not to pollute nature, then you are in luck. You'll need a plastic bag and some patience, but this method is easy and doesn't require too much effort on your part.
This video will show you an easy way to fill a mattress with air.
How to inflate a duct without a pump - by DaveHax. Have you seen anyone inflate an air duct without any physical tools? Chances are you most likely won't be able to find these handy outdoor tools, then how would you inflate that duct without blowing it in with your mouth?

This awesome video will answer your question: how to inflate an air block without a pump. Thanks to YouTube publisher "DaveHax".
How to blow up an air bed if you don't have a pump. A simple solution that doesn't leave you out of breath. Ideal for camping.

fb.ru
The first air mattresses appeared in 1940. They were made from a special fabric impregnated with vulcanized rubber. Currently, inflatable furniture is very popular. After all, it is convenient to use it in suburban trains and hiking trips. Often it is used as a full-fledged sleeping place in the country. The air mattress does not take up much space, is easy to clean and does not require complex maintenance.

Pumps

Expensive models have a built-in electric pump. But this configuration is not provided for all models. Therefore, mattress owners have to use a low pressure foot or hand pump. Car compressor not suitable for this process. High pressure can cause the mattress to burst. As soon as the product acquires the desired relief, the process can be stopped.

Security measures

The mattress must be brought into a heated room with a temperature above 15 degrees. It must be placed on flat surface away from heat sources. There should be no sharp objects on the floor. It is better to protect the bottom of the product from possible damage with a tarpaulin or foil. The air mattress should not be exposed to direct sunlight. Do not stand on the product. When the temperature rises, it is better to release some air. The air mattress cannot be wrinkled and bent.

How to inflate an air mattress without a pump

If the pump is not at hand, you can use other methods to inflate the mattress. How to inflate a mattress without a pump? The most obvious way is to use your lungs. But it will take a lot of time and a few strong guys. You can use the exhaust pipe of the car. But exhaust gases are not very useful and can damage the surface of the mattress.

A vacuum cleaner

How to inflate a mattress without a pump? The mattress can be inflated and deflated using a vacuum cleaner. Everything is simple here. A thin nozzle from the device is attached to the mattress hole, the vacuum cleaner turns on and inflates the mattress. Do not inflate the product more than 85 percent of its volume.

hair dryer

The main thing is that the hair dryer fits the valve of the air mattress. You need to enable " cold air” and pump up the product. Hot air can damage the air mattress. This method is effective, but takes some time.

Garbage bag

This method is convenient to use in nature or in the country. It needs a large, dense package. It is filled with air and connected to the mattress inlet valve. Next, you need to lie on the bag, distilling air from it into an inflatable product. The procedure will have to be repeated several times.

How to quickly and easily inflate a boat or mattress without a pump using an exhaust pipe

https://zen.yandex.ru/media/master_fisher/

In this publication, we will share another life hack - how to pump up a boat or mattress if there is no pump. After all, anything can happen in life: the pump can be forgotten at home or it can break. Is there anything that could happen?
And you have already tuned in to fishing - do not cancel everything? Fortunately, there is one trick that will help pump up a boat without a pump.
So, if you find yourself in a similar situation, when you need to pump up the boat, and the pump safely remains at home or in the garage, then you need to arm yourself with a couple of pieces from the hose and one adapter.
For convenience, these things should always be in the trunk - they do not take up much space, but they will help out in a difficult situation.


One section of the hose should fit over the exhaust pipe of your car, and the second section can be taken from the boat pump itself. So the first segment should be put on the exhaust pipe, connected with the second segment by means of an adapter - and start the car engine.
And in a few minutes the boat will be pumped up. Simple, fast and easy. The method is also suitable for an air mattress when you go to nature by car.

Along with traditional furniture options, an inflatable version is quite popular today, successfully used not only at home, but also on country trips, hiking trips and under other circumstances. To fully enjoy the comfort of inflatable furniture, you need not only to purchase it. You also need to take care of the presence of a pump.

Some models of inflatable furniture have a built-in pump option, thanks to which the process of giving the mattress the desired shape will take place without much difficulty. If the device is not available, then you can find an alternative solution to the question of how to inflate a mattress without a pump in a house or apartment. But if the absence of sediment is found in the bosom of nature, then the inflatable furniture will remain in its original state in the form of a pile of rubberized material.

What can be done?

In order for the mattress to acquire the desired shape without a specialized pump, you can first use the capabilities of your own lungs. That is, in the presence of a significant volume and physical strength, we inflate the mattress with our mouth. In the absence of the above criteria, as well as those who take care of their own lungs and eyes, in which blood vessels can burst from stress, it is worth using the help of a household vacuum cleaner.

For example, you can take the Rainbow brand of household cleaning equipment and, thanks to its power, inflate the necessary air mattress. The unconventional application of this device, characterized by a significant suction power, has been known for a long time.

It is worth remembering that back in Soviet times, when locally produced vacuum cleaners could be bought on domestic shelves, craftsmen used this equipment not only for its intended purpose. But, for example, for whitewashing, at the same time, specialized nozzles were fitted to the pump. Today, this mechanism can successfully perform the functions of a compressor.

If you use the Rainbow brand pump instead of the built-in device for inflatable furniture. As well as the nozzles attached to it, then there will be no problems with balls, balls, rubber toys and, of course, sleeping air mattresses. All you need to do is choose a thin nozzle and attach it to the vacuum cleaner. Where there is an air outlet. If everything is done correctly, then it will take a couple of minutes to pump up not only a ball or a toy, but even a mattress on which it is supposed to spend a comfortable sleep time.

The degree of elasticity of an air mattress inflated with a third-party vacuum cleaner depends on several criteria. It is necessary to take into account not only the number of people who are going to comfortably rest on it, but also their total weight. In the event that the number of people is not large, and their weight is insignificant, then the degree of inflation of the mattress can be high.

If there are a lot of people and, accordingly, the weight will be expressed in significant digital indicators. Then it is not 100% worth filling inflatable furniture with air. Experts say that resting on an air mattress with a significant number of people will be characterized by comfortable performance when it is only 80-85 percent inflated.

In order for inflated furniture to be comfortable and not rigid, the process of using a vacuum cleaner to pump air into it must be controlled. Management of the level of rigidity must begin at the moment when the mattress area acquires the first signs of elasticity. That is, when “wrinkles” disappear from the surface of the furniture.

At this point, it is worth stopping the vacuum cleaner. It must be remembered that the recommended degree of filling of the mattress should not exceed ¾ of the volume of the balloon. If this condition is left without attention, then the anticipation of a comfortable stay will remain so. Because under the weight of the bodies, the seams of the mattress are likely to break. Even if they seemed to be the strongest.

If the number of people intending to rest on inflatable furniture does not exceed two, then the filling rates of the mattress in ¾ of its volume should be further reduced. The same principle of filling the mattress should be observed by users if the cylinder has been exposed to direct sunlight for a long period of time. This is necessary because inside the mattress in the sun, the air not only gets very hot, but also expands. Which creates additional pressure on the seams and its base.

A few precautions

Inflatable furniture, including mattresses, requires careful handling. It is required to protect such products from objects with sharp edges. And also from animals that have not only sharp claws, but no less sharp teeth. It is not recommended to step on inflatable products with your feet. You can’t even stand on the mattress with one knee. The process of filling inflatable furniture with air and the reverse process must be carried out with a high degree of care.

Summer is finally here: the season of burnt backs, midday naps on the beach and overnight stays at friends' cottages. All these different, but equally summer activities have one common element - an air mattress. It is much more pleasant to do all of the above with him. But the mattress still needs to be inflated, for which many of us do not have the patience or lung capacity. Relax: here's to disgrace an easy way to fill a mattress with air without any effort at all.

So, your beloved relatives suddenly came to you, your friends called you for a sortie, and the children want to go to the beach. The mattress has already been removed from the far drawer, but there is no pump in the house. What to do? Either blush and test the vessels in your cheeks, or follow garbage bag. After all, it is he who will save the situation from failure, and the guests from the prospect of sleeping on the floor.

Take the bag, unfold it and take in as much air as possible. The easiest way to do this is in the video below.

Pinch the “throat” of the bag tightly so that the air does not escape.

Bring the air bag directly to the valve so that the latter is inside.

Press firmly on the bag to force all the air out of it, filling the mattress. Repeat the whole procedure several times until you completely inflate the mattress with the “pump” bag. Just remember to close the valve between sets.

The whole process of inflating the mattress with air from the bag is captured on video. It looks funny, so your friends will definitely be amused. But it works!

Well, if all the preparation of the mattress takes place at home, then you can do without dancing with a tambourine or a garbage bag. Just blow this thing up hair dryer with cold air blowing function and sleep peacefully.

And with this summer life hack, another one goes well: