How to clean scratches on the refrigerator. How to remove scratches from a steel-colored refrigerator

With proper cleaning and care, a stainless steel refrigerator can retain its original look and shine for a long time. Minor scratches can be removed with a cloth and a mild polish. If there are a lot of scratches or they are deep, you will have to use sandpaper.

Steps

Part 1

Define texture. Like wood, stainless steel has its own structure, or “texture”. When cleaning, polishing or sanding the material, it is necessary to move along this texture. To determine the direction, proceed as follows:

Clean the door with a mild cleaning and polishing powder. Before any scratches can be removed from the stainless steel surface, it must be cleaned. When sanding or polishing a door, dirt, dust, and debris remaining on it can further damage it. Clean the surface of the door with a mild cleaner such as Bon Ami, Comet or Ajax.

Remove dirt from the refrigerator door by wiping it with a vinegar cleaner. It's soft but effective remedy contains 1% more acid than standard food grade vinegar. Additional acid helps to clean the surface from greasy spots. Before you start removing scratches, clean the surface of the door with vinegar.

Clean the refrigerator door with a stainless steel cleaner. There are several solutions designed specifically for cleaning stainless steel. Choose the product most suitable for removing dirt, grease and dust from the refrigerator door. Before using any mixture, carefully read the instructions that come with it.

Part 2

Polishing and sanding stainless steel refrigerator door

1. Try wiping off a shallow scratch with a non-abrasive cleaner first. Dampen a cloth with a small amount of mild cleaner and lightly rub it over the small scratches on the refrigerator door. Bon Ami, Ajax and Comet are commercially available in powder or ointment form specifically designed for cleaning stainless steel surfaces.

   If the previous method doesn't work, try brushing out small scratches with a soft-bristled toothbrush and whitening toothpaste. Unlike mild cleaners, whitening toothpaste has some abrasive effect. If buffing with a mild product doesn't work, try rubbing the scratch with a whitening toothpaste.

   Remove deep scratches with sandpaper. If the scratch on the refrigerator is too deep, it can be rubbed off with sandpaper. Before doing this, be sure to consult with the refrigerator manufacturer to find out which sandpaper number is best.

Part 3

Repair and replacement of a severely damaged refrigerator door

Remove multiple scratches with the Stainless Steel Scratch Remover Kit. If your refrigerator door has a lot of scratches, you might want to use a stainless steel scratch removal kit. These kits can be purchased at most hardware stores or online. A typical kit contains a sander, three types of sandpaper, lubricant, and a tutorial video.

I wonder why it happens that large and deep scratches appear in the most visible place of the refrigerator door? Why wouldn't a scratch appear at the bottom of a door or on the side facing a wall or window? It will definitely occur at eye level or in the middle of the door.

It is especially disappointing when scratches appear when moving or moving the refrigerator immediately after delivery from the store. Such a scratch does not give rest either day or night. I don't even want to go into the kitchen.

Scratches on the refrigerator can remain even from magnets once placed on the surface.

How to remove a scratch on the refrigerator?

Of course, you can use a corrector or auto enamel to mask a scratch, but unfortunately, if the scratch is deep, then it is impossible to hide it 100%. She treacherously stands out, despite all your tricks.

Perhaps the most suitable option to mask scratches - these are large magnetic panels on the refrigerator. They will allow you to hide minor defects on the surface of the refrigerator: scratches, scuffs or small dents.

Magnetic panels on the refrigerator door in the interior

The magnetic panel is very thin, it is easily placed on the edges and emblems of the refrigerator, smoothing out the protrusions.

It is difficult to imagine a cozy kitchen without a refrigerator. Today you can choose a refrigerator for every taste: white, steel, black, large or small, with or without the nofrost function. However, over time, scratches form on the surface of the refrigerator from accidental impacts, wear and tear of the coating. How to remove scratches from the refrigerator, it is useful for every hostess to know.

When removing scratches, it is important not to damage the surface so as not to spoil the aesthetic appearance of the equipment. The surface of the refrigerator can be made of steel, plastic or other combined materials. The methods for removing scratches in these cases are very different.

Removing scratches from a steel surface

When working with such a surface, it is worth considering the features of the texture of the material. Experts recommend moving in the direction of the canvas texture when working, so the step of determining the direction is an important parameter of the procedure.

To determine the required direction, you will need to perform simple steps:

• pay attention to the door to see the direction of the texture;
• after that, it is important to carry out preparatory work before sanding the surface.

Surface preparation

To correctly prepare the surface for further procedures, you will need:

1. Prepare warm water.
2. Moisten the surface of the refrigerator with it.
3. take advantage detergent soft action.
4. Clean the surface with a paper towel.
5. Change the water and thoroughly rinse the surface to remove all excess material and contamination.
6. Wipe the cover with a lint-free cloth.

If grease stains are found on the surface, then vinegar will help to cope with them. A little substance must be diluted with water before working with the surface.

1. Pour the resulting solution into the prepared container.
2. Clean the surface with a paper towel. The movements should duplicate the direction of the texture.
3. Wipe the treated surface with a clean dry cloth.

Ways to remove scratches

• With the help of a converter. In professional stores you can buy a converter. The tool is designed to work with steel surfaces. It is easy to work with it: you will need a clean, dry paper towel and a tool. Wipe the surface and you're done.
• We work with baby soap. On the wet wipe apply a little soap and rub it into the problem area. The texture of the soap will fill the cracks.
• Polish the surface with toothpaste. Toothpaste is widely used in everyday life. In the case of a refrigerator, it is enough to apply a little paste on the scratch and carefully rub the problem area with a napkin. Sometimes it happens that the scratch is deep, so the help of a toothbrush may be needed.

How to Remove Scratches from Plastic Parts and Combined Parts on a Refrigerator

To remove scratches on plastic and other parts of the refrigerator, you will need to prepare the following tools:

• Special pencil or paste.
• Polish.

These tools must be handled with care. There are many shades of material on the shelves in stores.

To remove minor scratches or serious damage to refrigerator parts, you will need to use a polish or creamy product that contains abrasive particles.

To level the surface, you will need the help of a soft finisher.

It is important to use lint-free wipes when working.

Removing scratches

• If you are familiar with this kind of work, then an ordinary lighter will help. For the procedure, you will need to light it and bring it to the place of damage at a distance of 10 mm. Wait for the surface to cool down.
• If you are a beginner, then you can paint over the scratches on the refrigerator with a masking pencil that matches the color. Apply a pencil to a clean and dry surface. Residues must be removed with a lint-free cloth.
• Sometimes a drop is enough vegetable oil. It needs to be dripped onto the problem area or applied with a cotton pad. Polish the surface thoroughly. This measure will not eliminate the damage, but will mask it for a long period of time.
• If small scratches are found on the surface, then do not delay with their removal or masking. Masters of their craft recommend trying Goi pasta. With it, you can forget about the scratches on the refrigerator. Apply a small amount of product to the prepared surface and polish thoroughly. Then remove the remnants of the substance.
• Ordinary wax will do. Apply a small amount of wax to the affected area. Rub the surface with a flannel cloth.
• Experienced housewives recommend using a car interior care product. Use the composition strictly according to the instructions - and the result will not keep you waiting.

Let your refrigerator shine with a clean and smooth surface for many years to come! After all, removing scratches from its surface or at least painting them over is not so difficult.

When buying a new refrigerator, we hope that it will serve us for a long time and will not cause much trouble. Especially if it is made of stainless steel, which contains chromium. It forms a protective layer that can resist rust. But despite its resistance to corrosion, the metal itself is quite soft, dents and scratches easily appear on it, which spoil appearance your assistant in the kitchen. Deep scratches usually cannot be removed without the help of a qualified technician and equally qualified equipment. But small surface imperfections can be removed with a rag and a mild polishing agent. Consider several ways to remove scratches from a steel-colored refrigerator.

Preparatory work

First of all, any stainless steel has its own structure or, as it is called, texture. When cleaning the surface or when polishing it, you need to move along this texture. To do this, you need to determine its direction. Take a closer look at the refrigerator door. You will see small footprints indicating the direction of the structure. Once you have decided which direction you want to go when polishing and cleaning the surface, you need to prepare the surface for sanding.

To do this, it needs to be cleaned so that dirt and dust do not spoil the whole thing when polishing:

1. Wet the entire surface with water.
2. Apply a mild cleaner, such as Comet, to the damp surface and wipe the surface along the texture.
3. Wash the refrigerator door clean water to wash off the remaining cleaning agent and dirt.
4. Dry the surface with a microfiber cloth.

To clean the surface also of greasy stains, clean it with vinegar. Just dilute it first in a small amount of water:

• Pour vinegar diluted in water into a small container.
• Take a clean rag, soak it in the vinegar solution and, moving along the metal texture, wipe the surface.
• Remove residual vinegar by wiping the surface with a soft, dry cloth.

Polishing the refrigerator door with cleaners

There are several solutions designed specifically for cleaning and polishing stainless steel. On sale there are funds from Bon Ami, Ajax and Comet in the form of powders or ointments. If you decide to use such a tool, then carefully study the instructions that come with the composition.

Important! Pay special attention to safety precautions, in most cases it is suggested to work with gloves.

Try treating a small, shallow scratch first and see how the product of your choice behaves. Farther:

1. If you are using powder for polishing, dilute it with water until you get a smooth paste.
2. Apply the paste to the scratch with a damp cloth or sponge and rub it in.
3. Polish the surface until the scratch is gone.

We use a special converter

Try WD-40. Place a small amount of WD-40 on a dry paper towel. Gently wipe the scratch.

Important! This tool can be harmful to your health, so use it with extreme caution, always wearing protective gloves.

baby oil

To remove small scuffs, you can use any baby oil. Simply apply a small amount to a clean cloth and rub into the problem area. The oil will fill the microcracks, making them less noticeable. Residual oil can be removed paper towel.

Polishing with toothpaste

How else can you remove scratches on the refrigerator? Small minor scratches can be removed with toothpaste white color without crystals and granules. If polishing with a soft cloth did not bring proper results, you can resort to harder ones, that is, a toothbrush:

1. Apply a little toothpaste to the bristles of the toothbrush, rub the problem areas with it. Move along the metal texture and don't rub too hard.
2. Periodically wipe the toothpaste with a cloth and check the result. Continue until you are satisfied with the results of your efforts.
3. After all manipulations, wipe the surface with a damp cloth.
4. Apply a little olive oil to the cleaned and sanded surface.

Sandpaper

Deep scratches can be removed with sandpaper. But first, check with the manufacturers, if possible, to find out what size of sandpaper you need to choose for your model. When you have clarified this issue, you can start:

1. The surface must remain wet during the sanding process. So wet the scratched area and make sure it stays wet throughout the polishing process.
2. The sandpaper needs to be damp, so lightly dampen it and run the sandpaper lightly over the scratch, working your way along the metal texture.
3. Finally, go around the scratch to smooth out the sanding.
4. Dry the treated area. For these purposes, a fabric with a micro-wavy surface is perfect.
5. Apply olive oil to the polished area.

Stainless Steel Scratch Removal Kit

If you have a huge number of scratches on your refrigerator, then you should consider purchasing a special scratch removal kit. It contains a sander, three or more types of sandpaper, lubricant. As a rule, a CD with a training video is included.

To remove scratches from a steel-colored refrigerator in this way, proceed as follows:

• Attach the finest sandpaper to the polishing stick, apply lubricant to it and process the damaged area.
• If the problem persists, attach the next largest sandpaper and treat this area in the same way.

Important! If the scratch is still visible, use even larger paper.

• Once you've got rid of the scratches, sand the entire surface of the refrigerator with your last used sandpaper.

Important! Remember to always move along the metal structure.

Help from a specialist

If the refrigerator is badly damaged and you do not want to fight for its appearance yourself, then you should turn to professionals who can handle this task. The master will assess the scale of work and suggest ways to restore the surface.

Important! In extreme cases, you can completely replace the damaged door. If you have come to such a decision, then contact the service center and find out how this can be done.

• Remove scratches from the surface very carefully, moving only along the metal structure. Polishing stainless steel across its texture will only add to your problems - noticeable streaks will appear on the surface of the door and you will have to figure out how to remove them as well.
• Do not use steel wire for polishing. It will not only not help to remove old scratches, but will also add new ones. In addition, it can lead to rust formation.
• If you have deep scratches, but they are not very long, you can simply mask them. Place magnets large enough to cover the scratched area.

You will need: 1. Sandpaper. 2. Gasoline. 3. Acrylic or enamel paint. 4. Putty. 5. Marker or corrector. To remove scratches from the refrigerator, it is necessary to carry out preparatory work. Clean the damaged surface with sandpaper.

Then, carefully rub the refrigerator with gasoline and putty.
Wait for the surface to dry completely. Then, sand the refrigerator again with sandpaper. Then, apply the paint with a small brush. In addition to ordinary enamel, you can apply acrylic paint. It dries faster and is odorless, but its disadvantage is that acrylic adheres worse to the surface than enamel. This is the first way to paint over a scratch on the refrigerator.

There is another option. For small scratches, such drastic measures will not be needed, in which case, it is better to use a special, masking marker, which has a use for removing scratches on cars. Read the prescribed instructions before use. Shake the marker well and paint over the scratches.
Masking marker for cars is not cheap, so in order to save money, buy it when there are a lot of scratches.

An alternative to the marker is to paint over the scratches with French manicure varnish. Having bought nail polish, carefully walk along the scratch with a brush. First, make a thin strip, because if there is too much varnish, an ugly bulge will form and the attractiveness of the refrigerator will be lost. It is better to wait until the first layer dries, and then, if necessary, apply another thin strip.

How to Remove Scratches on Your Refrigerator If You Don't Have One special means, to eliminate scratches? In this case, use the usual proofreader for the text. It is able to hide minor damage to the surface of the refrigerator. However, it should be noted that the corrector is not durable and with careful cleaning, the painted surface may be erased. Gently wash painted areas or cover up scratched areas from time to time.

If you have no desire to deal with painting scratches, then there is a bold solution that does not take time - glue a magnet. Some resourceful people scratch out a drawing on a refrigerator and claim that it is new design. So, it's up to you which method is acceptable for your refrigerator.

How to paint over a scratch on a refrigerator using enamel paint or a car marker? How to remove scratches on the refrigerator if there is no money for expensive repairs? Is there an economical option for painting scratches on the refrigerator?

You can use white French manicure polish. Apply it in a thin layer.
. Cover the scratch with text corrector. However, in this case, touch up the surface from time to time.