They are submersible devices. They are multi-stage units, the operation of which is carried out through the use of centrifugal force.
Among the characteristic design features, which distinguishes the borehole pump Vodomet, can be distinguished:
- powerful engine equipped efficient system cooling;
- "floating" impellers;
- connection of the power cable to the top cover of the product, so that it can be installed in wells with a small casing section;
- built-in capacitor that allows you to use a three-core cable for connection.
The isolation of the hydraulic and electrical parts from the immersion medium is carried out by mechanical seals, which increase the life of the unit.
Oil-filled engine driving deep pumps for the well Vodomet, differs in stability of working parameters.
It is equipped with a protective casing that prevents oil from penetrating the cable.
Depending on the modification, downhole pumps Vodomet can be equipped with:
- automatic equipment that prevents the possibility of idling and protects against deformations.
- a removable filter, which is installed in the intake part and does not allow sand and dirt to be sucked in.
Operational Benefits
The borehole pump Dzhileks Vodomet differs in reliability, simplicity in use and service. Its other benefits include:- High efficiency, providing good performance and other technical parameters.
- The presence of protection in the form of a thermal protector, which protects the engine from overheating.
- Long service life. The pump for the well Water Jet Dzhileks can be used for a long time in intensive mode due to the special arrangement of parts and the use of high-quality raw materials.
- small size and weight, simplifying the transportation of the device. In addition, they help to reduce vibrations.
Pumps for water wells Vodomet are characterized by economical energy consumption and almost no noise during operation.
Cooling the motor with pumped water ensures trouble-free performance of the specified functions.
The relay, which protects against overheating, is placed outside the stator windings of the power mechanism. This makes it easier to diagnose breakdowns and carry out repairs.
Thanks to the use of "floating" impellers, Vodomet well pumps are not very sensitive to the composition of the pumped liquid and can be used to transport water with a high sand content.
Degree of protection IPX8 protects against ingress of moisture and is designed for operation in immersed state for more than 30 minutes.
Suggested range
Pumps for the well Vodomet are represented by several models. They differ in the nuances of design, technical characteristics and equipment.The line of equipment includes devices that can be used:
- for watering;
- for sources with low debit;
- for the organization of automatic supply.
Downhole pump Dzhileks Vodomet PROF - a classic downhole pump, with which it is very easy to organize a water supply system. It will need to purchase a hydraulic accumulator, a pressure switch and other components.
Borehole (well) pump Gilex Water Jet PROF A equipped with a float switch, which prevents operation without water. It turns off and on automatically.
well pump Water cannon "House" represents a more advanced version of the equipment, in terms of technical equipment.
It refers to automatic systems water supply and includes the following elements:
- well pump Water jet with a wire for connecting to the electrical network;
- storage tank with a robust steel body and a flexible synthetic rubber membrane;
- three-pin fitting;
- stop valves;
- check valve, excluding the flow of fluid in the other direction.
Using the remote control with a microprocessor, you can program desired parameters in the pipeline, depending on the operating conditions.
The Dom model is a modified water jet pump PROF, which has retained all the best properties of the basic products and is equipped with several additional functions. Among them:
- protection against "dry running", voltage surges and overloads;
- smooth start, which reduces the likelihood of water hammer during commissioning and reduces loads.
Application features
In order for the Vodomet downhole pump to retain its functionality for as long as possible, it is necessary to strictly follow the rules of use recommended by the manufacturer. According to them, you should:- apply for pumping medium, the temperature of which is from +1 °C to +35 °C and does not go beyond the specified limit;
- avoid installation in sources where the distance to the day is less than 1 m;
- exclude the pumping of liquid containing more than 2 kg / m 3 of sand in suspension;
- do not allow borehole pumps Vodomet to use if a violation of the integrity of the wire is detected.
If you are going to use the Dzhileks Vodomet borehole pump for its intended purpose, you must first check the performance. To do this, it is connected to the power supply for a few seconds.
When using the Vodomet pump for wells, it is necessary to provide for the installation of a head that will close the top of the casing and protect it from foreign objects and groundwater.
To prevent freezing, it will be necessary to build a well with a cover, and lay the pipeline below the soil freezing level characteristic of the area.
In this case, the internal cross section of the pressure water supply should not be less than the same parameter of the inlet of the apparatus for water supply.
To hang the water jet borehole pump, you will need a steel cable that is pulled through the lugs in the cover. It must support the weight of the apparatus and the filled pipe.
During the first start-up, the possibility of getting a significant amount of sand should be taken into account. In such a situation, it is forbidden to turn off the unit: it is left to work until the source is “pumped” and there are no impurities.
Mounting example
Vodomet pumps are submersible multi-stage devices of the Russian company Dzhileks, designed to provide autonomous water supply to houses and watering plots.
Production is located in Klimovsk, Moscow region.
Equipment Features
The equipment of this brand is a range of household appliances of various sizes and different capacities, so you can choose a model that will provide the required amount of water.
Advantages of submersible pumps:
- work quietly;
- are small in size;
- do not "trouble up" water, unlike vibration ones;
- small size;
- low price;
- high efficiency;
- reviews of submersible pumps Vodomet are mostly positive - there are practically no negative ones, which is also a significant indicator;
- the ability to work in water with a significant amount of sand or clay (from 2 to 5 kg / m 3).
Water pumps Vodomet, designed specifically for Russian operating conditions, are of two types:
- wells;
- borehole (deep).
What are their differences?
Pumps for wells Dzhileks Vodomet are designed for use in relatively shallow wells (8-10 m), tanks or open water.
A prerequisite for the operation of such a pump is the sufficient width of the reservoir so that not only the pump, but also the float switch can fit there.
The water cannon pump for the well has obvious benefits before the well:
- larger ratio useful action, which means, ceteris paribus, the submersible water jet pump for wells will have a greater performance than the water jet pump for a well;
- less sensitivity to dirty, "sandy" water;
- the presence of a simple float switch, thanks to which there is no need to install protection against "dry" operation;
- low price - from 9,000 to 13,000 rubles.
The submersible water pump for wells is smaller in size and is designed for extracting water from narrow (from 100 mm) and deep wells, lifting water from a considerable depth (usually the depth of wells is from 40 m).
The price of pumps for water jet wells is slightly higher than the price of well pumps - from 10,000 to 24,000 rubles.
About manufacturer's models
Submersible pumps Vodomet are available in several modifications, differing in power and other technical characteristics. Pumps for wells are marked as follows: pump Vodomet 55/35A, 55/50A, 55/75A, 150/30A, 150/45A, 150/60A.
Here, the letter "A" indicates that the pump is equipped with an automatic float switch.
Well pumps have the following designations: Water jet pump 40/50, 40/75, 60/32, 55/35, 55/50, 55/75, 55/90, 110/110, 115/115.
- The first number indicates the pump's maximum outlet flow (l/min). This flow rate is determined with open taps and no resistance to water movement.
- The second number is the maximum head (m), which develops the device with fully closed taps.
For example, the submersible pump Vodomet 60/32 delivers up to 60 liters of water per minute with a free spout, and when the water consumption taps are closed, it can create a pressure of up to 32 m. This unit costs almost 6800 rubles.
Based on the technical characteristics, we can say that:
- Water jet pumps with a maximum possible flow rate of 60 l/min will work most efficiently in water supply sources with a small flow rate (the amount of water that a source can give per unit time). In this case, the flow rate of the source must be no less than the performance of the pump, otherwise the pump may pump out all the water in the well (well), and begin to draw in silt or work “dry”, which can lead to its breakdown.In real conditions, a submersible pump Vodomet 60/52 at a price of about 8000 r can provide a consumption of 35-40 l / min (more than 2 m 3 / hour) - up to 4 consumer taps at the same time. The submersible pump Vodomet 60/72 at the price of 10,000 r will give a stronger pressure at the same flow rate. Thanks to this, with the help of such a pump it is possible to move water over a greater distance.
- Pumps Vodomet with the highest flow rate of 115 l / min, provide for use in wells with medium and high flow rates, with a possible water flow rate of up to 65 l / min (about 4 m 3 / h). The submersible pump Vodomet 115/115 is one of the most powerful borehole pumps in the line. Its power is about 2200 kW, and the price is 16,000 rubles.
- Pumps Vodomet with a flow rate of up to 150 l / minute are necessary for the water supply of large houses. Such pumps can only be used in wells with a high flow rate, and their use is advisable at high water flow rates - more than 4 m 3 / h.
More accurate data for selection is easy to calculate on your own. The required pressure of the pump is the sum of the values of the required pressure in the taps of consumers, possible pressure losses in pipelines and the height difference between the source and consumers.
Roughly, the maximum pump head can be determined by measuring the distance from ground level to water level in a reservoir:
- if the specified distance is less than 5 meters, then a pump with a head of up to 35 m is suitable. For example, a submersible pump Vodomet 55/35;
- if the distance is from 5 to 25 m, then a device with a declared head of 40 or 50 m is suitable. For example, a submersible pump Vodomet 60/52;
- if the distance is 25 - 45 m, you should choose a model with a head of 60 or 75 m. For example, a submersible pump Vodome 60/72;
- if the distance is from 45 to 60 m, it is better to choose a device with a pressure of 90-150 m. For example, a submersible pump Vodomet 115/115.
Device Reviews
Water pumps Vodomet are very popular with owners of private houses and summer cottages, so a variety of reviews have been accumulated about pumps for Vodomet wells.
Since the submersible pump for the water jet well is not deprived of attention and there are enough reviews about it - let's give a few for an example.
Maxim Viktorovich, 41 years old, Podolsk:
I have had a submersible water pump for the fifth year. Installed in a well at a depth of 25 meters. It works and works, the pressure is normal, only sometimes there is not enough water for everyone.
At first, I thought that my sandy well would "kill" the Vodomet well pump in a couple of years. I don’t know about others, but everything suits me. I'm thinking of looking at a more powerful model.
Maria and Alexander Semenov, Kursk:
Considered different variants for supplying water to the country house. We chose between Ukrainian Aquarius and Russian Gileks. Aquarius, they say, is very sensitive to sand, a remote condenser is also inconvenient. In general, we settled on a submersible pump Vodomet 60/52.
It turned out that it gives 52 l / min only in ideal conditions, but in fact it comes out two times less. Nobody warned us about this. Would have known in advance — bought more powerful.
Mikhail Viktorovich, 61 years old, Ufa:
Reliable, good device. A submersible well pump Vodomet has been installed in the well for more than three years. It extracts water from eight meters and in a straight line about 35 meters more. Disadvantages - it is bad to connect through the RCD (often knocks out) and the cables are short.
About the device
The pump, completely immersed in water, works in very difficult conditions. Despite research, testing and the latest developments, these devices often fail. The causes of breakdowns are very diverse, but the main ones are:
- installation and operation of the pump in violation of the manufacturer's recommendations;
- voltage drops;
- dirty, sandy water;
- mechanical wear of parts of the mechanism - housing, blades.
In order for the Water Jet water pump to work properly for as long as possible, it must be installed correctly. So, when installing a pump in a well, it is necessary to mount it in casing pipe with an inner diameter of at least 100 mm.
The upper part of the pipe is closed with a cap to prevent foreign objects from entering the well.
To prevent freezing of the device in winter, a closing well is installed above the well, and the main pipe to the house is buried in the ground below the freezing level. The pump is installed so that it is lowered into the water, but not closer than 1.5 m to the bottom of the reservoir.
The schematic diagram of connecting the Water Jet pump is no different from the nuances of installing any other pump for a well - tied to a cable, it sinks to the bottom of the well. Attached to the cable with staples power cable and a hose through which water will flow.
After the device is at the bottom, the cable should be firmly fixed at the top.
A big plus is that do-it-yourself repair of the Water Cannon pump is quite possible. For a successful repair, you will definitely need spare parts to replace the damaged ones.
If "guilty" - circuit diagram water jet pump - the capacitor may have failed. If the water from the tap began to flow worse, the filter may be clogged or the hose is damaged (and the water simply flows back into the well).
The internal structure, the procedure for disassembling and repairing the Water Jet pumps are indicated in each instruction for the device.
However, it should be noted that it is not recommended to engage in such work on your own - despite the simplicity of the design, its disassembly and assembly (especially) requires some experience.
Equipment overview (video)
The range of products manufactured by GILEX includes several models of borehole pumps with different technical characteristics. This equipment is intended for use as part of domestic and industrial water supply systems with water intake from wells and boreholes. According to users, well pumps from JILEKS LLC are among the best on the Russian market.
Rules for choosing pumping equipment
Efficiency autonomous system water supply with forced water supply depends on the compliance of the technical characteristics of the pumping unit used with the conditions of water use. To do this, it is necessary to make a thorough analysis of all the nuances of the upcoming operation even before ordering equipment. If you are faced with the question of which well pump is better to choose, consider the following criteria:
- well flow rate and volume of water consumption, the maximum number of inclusions per hour;
- temperature of the pumped liquid;
- parameters of the existing electrical network;
- water quality, presence and size of mechanical impurities;
- possible immersion depth for the submersible unit.
One of the most popular borehole pumps of the JILEKS company is the VODOMET centrifugal submersible unit. This equipment is available in several modifications, which allows you to choose a device with optimal technical characteristics for specific conditions of use. Each model is distinguished by high reliability, unpretentiousness, efficiency, and has a high efficiency. When choosing, use the online consultation of our company's specialists. Channels for communication are given in the "Contacts" section.
Each well in the summer cottage for supply from the depth pure water, must be equipped with a device such as a water jet pump. This device, like a water jet pump, makes it possible to receive water from a well where there is no water.
Powerful specifications water cannon pumps allow you to lift water from great depths. The water jet pump is small in size, has a very simple design, and endowed with the simplest automation.
1 Features and differences
Water jet pump "" regardless of size, models are always made only at domestic enterprises. All pumps of this line are adapted to the Russian climate. And we know that water resources(highways) have never been clean in our country.
As a result of this, even the simplest water cannon can pump the dirtiest water and not fail for a long time. The channels inside the pump are practically not contaminated.
The most important advantage of the pump is that it is able to clean itself. Pumps are also good because, in addition to Soviet components, you can easily pick up spare parts for them from French, American and even German production. At the same time, the price of a water jet pump is much lower than, for example, German or French counterparts.
Now the pump is constantly being improved. The quality of performance is improving, the design has become an order of magnitude better. Here, for example, if we talk about the latest model of a water jet pump for a well, then in it the electric motor is located above the location of the pumping part. As a result, the Water Jet water pump has a body that is an order of magnitude smaller. It became possible to connect electrical cable to the top.
All water jet pumps for wells have a wetted motor. This means that water passes between the casing and the stator sheath. As a result, the engine is continuously cooled.
The water jet pump for the well has high-quality dividing seals. These seals protect the motor and also give a complete seal to the housing.
2 Water jet pump device
The water jet pump for the well has a very strong power. This allows him to provide water not only for a small plot of land, but for the whole house.
We will now analyze the most best models water jet pump.
Submersible model WATERJET PROF 55/35
This model is capable of pumping 3.3 cubic meters of water per hour. Equipped with a 1.5 x 1.5 mm mesh filter. Due to this, it prevents major clogging, which is in the water. This model of a submersible water jet pump is equipped with an overheating relay. The downside is that the float switch is not included.
Pump submersible water jet PROF 55/50
This model is equipped with a powerful 630 W electric motor. The maximum water lift is 50 meters. The immersion of this model can be carried out partially or completely. The maximum diving depth is up to 30 meters.
Submersible pump water jet 60/72
This model fits Russian realities. She has modern design. This model is made of environmentally friendly material. Built-in overheating relay. The set includes a mesh filter. This model is best suited for irrigation of a summer cottage. Has a patented design.
Submersible pump water jet 60/52
This model is the best among all types of submersible pumps. It is designed for pumping clean water. Its main advantage is high efficiency. The maximum head is 52 meters. The power of this model is also very decent - 700 watts. Long power cable 20 meters. Maximum depth up to 30 meters. The submersible water jet pump 60/52 is equipped with a float switch. The body is made of stainless steel. You can buy a Jilex water jet pump of this model in specialized stores without problems.
Prices on submersible pumps water cannon for wells:
- Gileks water cannon 60/52 A, price from 10,000 rubles;
- The price of a water jet pump for wells Water jet 60/62, 55/50 from 10,500 rubles;
- You can buy a water jet pump Prof 55/35 from 6,500 rubles;
- Gileks Water cannon 60/52, its price is from 9000 rubles.
2.1 Systems of the DOM series based on the Vodomet pump
Every country cottage area, and on it private house requires constant water supply. As a result, a system was developed for a constant supply of water. It is called "Water cannon house".
This system provides a constant supply of water to a summer cottage and a private house without human intervention.
The system consists of:
- Pressure sensor and manometer.
- System control panel.
- Hydraulic accumulator.
- Stop valve.
- Water cannon.
Set of the system "WATER HOUSE":
- Submersible pump.
- Pressure gauge.
- Control panel with pressure sensor.
- Hydraulic accumulator. They are water tanks with a volume of about 50 liters.
- Fittings.
- Stop valve.
This system provides constant water pressure. Saving electricity. Equipped with a current overload sensor, as well as a differential pressure sensor. It also has a soft start system.
The pump "Vodomet" for a well is a multi-stage equipment with floating impellers washed by water. Water cooling is one of the important factors which prolongs the life of the device.
Description
The design includes a built-in condenser, which is necessary for supplying water from the well. His inner diameter may be 100 mm or more. It is noteworthy that such a device is suitable for working in wells that contain an increased amount of sand. These pumps can be used with control by the level of filling the tank or by the level of liquid pumped out of the system. automatic control by pressure. Not only a well, but also an open reservoir, as well as a well can act as a source of water supply.
Feedback on the choice of model
If you decide to purchase a Vodomet pump for a well, you should be aware of the criteria by which this equipment is selected. According to users, it is important to pay attention to the numerical designation, the first digit indicates the maximum one minute output in the absence of flow resistance. Looking at the second number, you can understand what is the maximum head in meters developed by the equipment when working "to a dead end".
If you have a pump of the Vodomet 60/52 brand in front of you, then, according to buyers, this indicates that with a free spout, the equipment is capable of supplying 60 liters of water per minute. This volume is equivalent to 3.6 cubic meters per hour, while when the supply is cut off, the pressure will be 52 meters, that is, 5.2 atmospheres. This unit is almost never used in the limit mode, most often it is operated at the operating point.
The pump "Vodomet" for a well with a maximum flow rate of 115 liters per minute is used for wells and wells with an increased and average flow rate. If there is a need to select equipment for water sources with a high flow rate, then you should purchase an option with a maximum flow rate of 150 liters.
General characteristics of submersible type devices
The submersible pump "Vodomet" for the well has a high efficiency, it is ready to serve long time. This equipment has a powerful electric motor cooling system. The design of the pump has a cable that can be pulled through the top cover, which allows the equipment to be used in wells of even the smallest diameter
It is noteworthy that these submersible pumps can operate continuously for a long time, this became possible due to the presence of a built-in water "jacket". It provides water passage between the motor stator and the housing. "Water cannon" is capable of supplying liquid from shallow or great depths. The devices have good tightness and are equipped with a thermal protector, which is responsible for the temperature of the equipment.
Characteristics of the pump brand "Vodomet prof 60/32"
If you are interested in the products of the brand "Vodomet", the pump for the well "Prof 60/32" can be purchased by you. It belongs to the high performance series. Such equipment is suitable for water with a significant sand content. It can only be used in wells whose depth does not exceed 30 meters. The temperature of the liquid should not be more than 35 degrees.
Consumers who decide to purchase this equipment should be interested in the power of the submersible pump, which is 470 watts. In one minute, it will be able to produce 60 liters of liquid, the maximum amount of pumped sand will be equal to 2 kilograms per cubic meter of water. The products of the brand "Vodomet" have long become popular with Russian consumers, the pump for the well "Prof 60/32" is a confirmation of this. Its body is made of high quality stainless steel, which ensures a long service life of the device. However, in the process of using the unit, you must remember that the pressure should not be higher than 3.2 bar.
Characteristics of the pump brand "Prof 55/50"
When you visit the store, you can find large assortment goods that are manufactured under the brand "Vodomet". The 55/50 well pump can be considered as an example. The depth of its immersion is 30 meters, the power is 680 watts. The equipment must be installed vertically. As practice shows, the engine runs silently, and it is capable of pumping out 3.3 cubic meters per hour. This equipment should not be used for dirty water, because in this case it may fail. The size of the particles to be filtered can be a maximum of 1.5 millimeters, and the length of the power cord is equivalent to 20 meters. This information will help you when installing the device.
Characteristics of the pump brand "Dzhileks Vodomet 115/115"
If you are interested in the Vodomet brand, you can purchase a pump for a well 115/115 for 14,300 rubles. This submersible equipment is designed to pump water from a well, while the liquid may be slightly contaminated. The maximum depth, as in the above case, is 30 meters. Productivity is 6900 liters per hour. The advantage is that the device can also be used for small wells. With it, you can water the garden or garden, among other things, it is suitable for water supply in homes. The weight of the unit is 22.6 kilograms, which makes it easy to install.
This pump "Dzhileks" for the well, the photo of which is presented in the article, has a fairly wide area of use. It can be used in tanks, as well as open reservoirs. The equipment is perfectly adapted to difficult Russian conditions. To create it, the manufacturer uses durable and wear-resistant materials. For example, granite and ceramics are selected for. With regard to such important element, as impellers, a wear-resistant polymer is used for them.
Chantilly Castle - the second in France after Versailles Chantilly Castle how to get from Paris
Amusement park "The Land of Legends Theme Park" in Turkey
Holy places in Greece. Greece Orthodox. Pilgrimage to the feast of St. Nicholas
Picodi: All discounts in one place!
How to get to Dolmabahce Palace