How to attach decorations to a wedding car. Do-it-yourself car decoration for a wedding

02.07.2020

The tradition of decorating the car of the bride and groom and other wedding guests is observed by all the newlyweds. We will tell you how to make wedding decorations on a car with your own hands in this material.

The car of the bride and groom is the first thing the guests see when the wedding procession rushes through the streets, it attracts everyone's attention. Therefore, the decor of the car is the "face" of the wedding, the choice and placement of decorations says a lot about the taste of the main characters of the celebration. The bride and groom can show their imagination and make decorations for the car with their own hands. Such decor will look original and unusual, besides it will be cheaper.

Making decorations for a wedding car

The most important thing in decorating a wedding car is a sense of proportion. It is not necessary to decorate the car with balloons, ribbons, fabric, "We Got Married" stickers and fresh flowers at the same time. It is enough to select one or two elements. Fresh flowers usually look very beautiful: you can decorate the hood with flowers, and the door handles with matching small bouquets and ribbons (with the help of ribbons, flower branches will be attached to the handles). However, they are too expensive, so you can consider other decor options.

Wedding rings are one of the main decorations of the car: they are mounted on the roof. Rings can be easily and simply made by yourself. The basis is corrugated pipes for electrical wiring, which can be bought at any hardware store. Two pipes of the same length are taken, each folded into a ring. The ends of the pipe are fixed with tape.

Next comes the fantasy. You can wrap the rings with gold tape, gold foil tape or fabric. Rings should be attached to a stand, which can be made of foam or cardboard. The stand is decorated with foil, wrapping paper or cloth. The rings themselves can also be decorated with fluttering thin ribbons or flowers.

While the groom is working on the rings, the bride and bridesmaids can work on ribbons and other decorations. As a rule, the hood is decorated with ribbons. It can be a triangle, in the lower corner of which there will be a composition of fresh or artificial flowers, a flower bow made of ribbons, or soft toys in the clothes of the bride and groom.

It would also be nice to have a wide strip in the center or side of the hood, running from the windshield to the bumper, also decorated with flowers or bows. In addition, one wide diagonal stripe made from several matching ribbons, or a plain piece of fabric, on which bright flowers, ribbon bows or other decorations are sewn, looks beautiful.

To make the tapes look beautiful and original, you will have to work a little and show your imagination. A master class on making unusual ribbons for decorating a wedding car with your own hands is shown in the video.

The trunk of the car and the rear bumper should also be decorated so that casual passers-by who look after the car have something to look at. Here it is appropriate to place a large bow made of hard tulle, in the central part of which there may be a composition of the same colors that adorn the hood of a car.

How to attach wedding decorations to a car

Firstly, you can stretch the ribbons under the hood and attach flower or toy decorations to them. Usually, a simple linen elastic is sewn to one end of the tape, which is threaded under the hood and then sewn to the second end of the tape.

The second option is to use special suction cups. They are sold in themed stores. Usually, a fishing line is already attached to them, with which you can securely fix the jewelry on the car.

The third option is to use magnets. It is very convenient, but the whole difficulty is to find good, strong magnets: magnets from the refrigerator will definitely not help you with this. You can order the necessary magnets via the Internet in specialized stores.

Another way is to attach the decor to double-sided tape. This is very convenient, but not always reliable: it is better to buy several coils in advance and conduct a test drive in close to combat conditions. The downside is that it will not be easy to tear off the tape from the car the next day, the main thing here is not to scratch the paint.

Finally, last option- use those decorations, in the design of which everything is already provided: that is, decorations-magnets and decorations-stickers.

You can’t make car decorations with your own hands, as in the photo, but ordering stickers or magnets is not at all difficult, dozens of companies specializing in the production of printing and various souvenirs do this. But you choose the design yourself: you can order it to professionals or make a sketch on a computer with your own hands. You can make stickers and magnets with butterflies, flowers, superheroes, photos of newlyweds - the fantasy is not limited by anything. It may be more expensive, but you will have the most original and completely unique wedding car. In addition, such decorations are perfect for a themed wedding.

Photos of decorations on a wedding car: five original ideas

1. Orchids and bluebells. The melodious ringing of wedding bells is not only pleasant to hear, but, according to signs, drives away evil spirits and other evil spirits that can ruin a wedding. And orchids are one of the most beautiful and unusual flowers on the planet. This elegant decoration will look especially good on a dark-colored car.

2. Hearts instead of rings. On the one hand, the tradition is observed, on the other hand, heart-rings look fresher and more original. The red color will look good on both white and black cars.

3. Wedding rings with elephants. If animal figures appear on the roof of the car, then these are, as a rule, swans. Which is completely unfair to elephants: these animals are not only loyal, but also symbols of wisdom, reliability and patience. These qualities will undoubtedly help the newlyweds in their family life.

4. Decorations for car handles. Car handles are often forgotten, meanwhile, artificial flowers with ribbons will be an excellent decor element for the bride and groom's car. The main thing is that the flowers are in harmony with the ribbons, as well as the flowers on the roof and hood of the car.

5. Pillows-hearts. They can become the main decoration of the hood. The rest of the decor should also be done in scarlet or white colors.

A wedding is an expensive event, so many people try to relieve the budget by doing something with their own hands. For example, to make decorations for a wedding car. We offer examples of jewelry and tips for creating and attaching them.

DIY wedding rings on the car, ideas

Option 1

Material:

plastic pipe
Artificial flowers
foam plate
Golden ribbons (gold decorative tape) or fabric
Satin ribbons
Thread, needle, scissors
Scotch
Base fabric

Progress:

Cut the corrugated pipe hose into two parts. Make two rings by securing the pipe segments with tape.
Wrap the surface with tape to remove bumps from the surface.
Decorate the top with golden decorative tape or golden ribbon. In the absence of adhesive tape, golden fabric is suitable.
Secure the rings together with tape. Put on a foam pedestal, making small holes in it and stretching ribbons through them.
Cover the foam base with a beautiful fabric, sew.
Pull wide satin ribbons under the foam and rings, tie in the place where they are fastened with the foam. With the help of these tapes, the structure will be fixed on the car.
Decorate the rings with flowers and other decorations. Cut off the stems of the flowers and insert into the foam. Secure with a hot glue gun to keep the flowers from being blown away by the wind.
You can insert neodymium magnets into the foam, for a stronger fixation on the machine.

Option 2

Take the wire, glue it with paper, which you secure with tape (for volume).
Top with a shiny golden fabric, attach to a frame made of foam rubber or foam.
To secure to the car, attach to the frame of the tape.

How to make a decoration for a wedding car, ideas from a photo

Butterflies on suckers

hats

Material:

Whatman - 3 sheets
PVA glue
Glue gun
Hat fabric
White ribbon - 3 meters
Cardboard
Newspaper
thick ribbon

Progress:

Cut out two circles from whatman paper, 37 and 26 cm in diameter, leave a margin for fastening. Fasten the two remaining pieces of drawing paper together in the form of a tube with a glue gun. Attach the circles that will be the top and bottom of the hat.
Dilute the PVA glue with water, tear the newspaper finely. Soak it in the solution and stick it on the base, according to the papier-mâché principle. Let dry overnight.
Sew a cover from the fabric, cutting out a circle 28 cm in diameter, then two strips, one - 12 cm wide and 1.5 m long, the second - according to the shape of our base, slightly letting on the seams. Sew the main part first, then add a circle. Carefully stitch the edges of the circle.
Attach the cover to the base with glue.
Decorate the hat with ribbons.
Attach special magnets or suction cups to the hat so that it does not fall off the car.

Bow

Take the tulle ( a large number of), tie randomly to make a large bow. Can be tied with ribbon. Decorate to your liking.
Tape it to the car.

Decorating a wedding car with flowers, ideas with explanation

Flowers on suction cups

Purchase artificial flowers from the store, trim the stems if necessary.
Attach suction cups or special magnets to the flowers to secure them to the car.

flower composition

Material:

Artificial flowers, leaves
Tulle or mesh
Ribbons
Cardboard
Scotch

Progress:

Make a frame for the cardboard composition by cutting out a circle.
Fix the flowers on it by inserting decorative greenery and tulle envelopes between the flowers.
Fix everything with adhesive tape and decorate with a tulle skirt.
Attach the composition to the car with tape, or stretch the tape through the frame and pull it tightly around the hood.

Decoration of flowers and tulle

Material:

tulle
artificial flowers
Ribbons
Scissors
Elastic band underwear
Glue gun

Progress:

Cut a strip of tulle 25 cm wide.
Cut three 12-inch pieces of elastic to secure the embellishments.
Tie elastic bands to the ends of the tulle.
Cut several pieces of green ribbon, tie on the fabric at regular intervals.
Attach artificial flowers with a glue gun to the places that are tied with ribbons.

Wedding car decoration with ribbons, ideas with photos

ribbon and flowers

Get a tape that is twice the length of the hood and 5 cm wide.
Pull it through the V-shaped grille, secure it under the hood with a clothesline or tape.
Sew artificial flowers onto the ribbon. You can make your own flowers or organza bows.
Tie pieces of ribbon between the flowers so that they flutter when you travel.

puffy ribbon

Sew an elastic band to the ribbon and gather it a little to make the ribbon "accordion" for splendor.
Attach to the hood by adding some other decorative element (balls, stickers).

Heart from paper napkins on ribbons

Cut out a blank from cardboard - a heart, as well as a strip of 6 cm. Bend the strip in half.
On one side of the fold, cut the cardboard with scissors, attach this strip to the heart on adhesive tape.
Take a folded napkin, cut out a circle. Fix the middle with a stapler.
Flatten each layer of napkin with your fingers to make a flower.
Glue the roses to the base, fasten the base to two ribbons.

Decorations on the hood of a car, ideas from a photo

Decorations on the handles of wedding cars, ideas from a photo

Decorations on the mirror of wedding cars, photo

How to attach decorations to a wedding car

On the roof. Mount massive decorations on suction cups and ribbons. Tie the tapes under the roof of the car, they are also held by the side axes of the doors. Fasten the decoration to additional ribbons that should be attached under the hood of the car. Suction cups should be present on the bottom of the decoration for stability.
Mirror decorations. Fastened with elastic bands or ties. Jewelry should not cover the mirrors so as not to interfere with the driver's view.
Radiator decorations. Tied with ties.
On the back glass. Attached with suction cups.
Nets on the hood and tape. They are fixed with special tapes passing under the hood.
Small light decorations on the hood(flowers, butterflies) are attached using special neodymium magnets or suction cups.

DIY wedding car decoration video

The main thing in decorations on a car is a reliable fastening. Be aware of weather conditions such as rain and wind. Play it safe by securing heavy jewelry not only with ribbons, but also with additional suction cups or magnets.

Vika Dee

During the preparation of the wedding ceremony, the newlyweds face the issue of decor not only the banquet hall, but also the wedding motorcade.

You can decorate everything in a car: the hood, door handles, roof, trunk, hang decorations on mirrors, the main thing is that it does not look too overloaded. That is, it is better to choose one or two places where the decor will be. Most often they decorate hood and roof.

When choosing a decor, it is important to remember a few general rules regarding wedding cars:

Cars of the bride and groom should preferably be white or black.
Guest cars can be of any color, but in the column it is better that white, black and silver models go first, and after them brighter shades.
It is better to use decorations of no more than two or three colors, a more colorful range will look clumsy and tasteless.
All elements should not obscure the driver's view.
If cars are rented, then you need to clarify whether they can be decorated and with what. It is advisable not to choose decor that is too sticky, so as not to leave marks.
The style of the entire tuple must be the same.

Photo of a simple and beautiful do-it-yourself wedding car decoration

What can be used for decor to simply and tastefully decorate a car for a wedding with your own hands:

ribbons of any material;
fabrics: chiffon, tulle, organza;
flowers: live or artificial;
Balloons;
figurines and figurines, plush toys;
paper decorations: pompoms, posters, applications;
comic numbers with inscriptions and drawings.

Decorating a car with your own hands for a wedding is a significant savings in the budget of young people, especially if you rent a car. Plus, it's an opportunity show imagination and creativity, achieving exactly the result you want.

Master class decorating a car for a wedding with tulle with your own hands

tulle quite often used as decoration for wedding cars - this is a relatively inexpensive fabric, besides, it looks chic as part of a wedding decor.

As a rule, most often the fabric is used as a decor for the hood or roof.

Decorating the hood of a car with tulle is very simple - the fabric of the desired color is stretched diagonally from windshield to the bottom of the hood so that it expands from below. The lower part of the fabric is closed with a hood, the upper corner can be attached with an elastic band to the side glass or fixed with double-sided tape. Only the fabric will look incomplete, so it must be supplemented with flowers or balls. Another decor option is two strips of tulle stretching from different sides of the car to the center of the hood.

Photo of do-it-yourself car decoration for a wedding from tulle

In this case, again, double-sided tape or rubber bands will help. Strips of tulle can be tied with ribbons at an equal distance from each other or decorate with flowers.

How to make a decoration for a wedding car with your own hands?

Wedding decor can be easily done with your own hands, the main thing is a little patience and perseverance. One of the most popular decorations on a car is, of course, large wedding rings on the roof of a car.

Master class on how to make gold rings on a car

For the rings you will need: a corrugated pipe 2 meters long, polystyrene foam, bright gold ribbon, adhesive tape, glue, scissors.

gold rings for a wedding car

Stages of work:

The corrugated pipe must be cut into two parts and connected into a ring. Fasten with tape.
Wrap the rings with ribbon: here you can show your imagination and use not only the gold color.
Two finished rings must be glued together and wrapped with tape.
Next, the foam is taken: ready-made rings must be attached to it. The whole structure is assembled together - fixed with glue and additionally decorated with fabric, flowers and ribbons. For better grip, the corrugated pipe can be pierced with a knitting needle.

Look very nice satin ribbons on the hood of the car, besides it is very simple. What you need: satin ribbons of the desired color, scissors, floral arrangements for decoration.

Stages of work:

The necessary segments are cut from the tapes according to the size of the hood, plus a little for the mount.
Tapes are attached to the hood in the desired order - obliquely, from the edges to the center or vertically on the side. You can attach it with adhesive tape or rubber bands, pressing the bottom edges with a lid.
Decorate the fixed ribbons with flowers. The decoration is ready.

Miniature boutonnieres will be an excellent decoration for door handles, they can be attached to the same satin ribbons. The hood or roof will be decorated with figurines of the bride or groom, or paired swans. Can you make hearts out of paper napkins.

How to make cute hearts from napkins step by step? For work you will need: napkins of the desired color, cardboard, glue, stapler, scissors, pencil, double-sided tape.

Stages of work:

Cut out a heart from cardboard right size and a separate strip for the sides.
Fold the strip in half lengthwise, make cuts along the bottom with scissors for fastening.
Attach the strip to the base with the cut side down on double-sided tape so that you get the sides.
On 3-4 napkins, draw circles with a pencil and stitch them with a stapler, crosswise. Then cut out the resulting circles and pick up the layers, crushing them with your fingers so that petals are obtained.
Glue the finished roses on the glue to the base, placing them tightly against each other. The paper heart is ready.

Self-decoration of a wedding car with flowers

Flowers - they must be in the decor of the cortege! Certainly, real flowers look fresh and better than artificial ones, but in the case of decorating a car, it is better to opt for the latter - they will retain their appearance longer.

How to make flowers with your own hands? Very simple. The main thing is to stock up necessary materials: cloth, wire, floral tape, glue and scissors. Buds can be made from felt, tulle, floral paper or purchased ready-made artificial flowers.

Corrugated paper buds for a wedding car

Very interesting and delicate look corrugated paper buds. For such flowers you will need: sheets of corrugated paper, white, pink and green, scissors, glue, wire or skewers for stems.

Stages of work:

From white and pink sheets, cut out the petals of the desired size - depending on the type of bud, whether it will be a rose or a peony.
From paper, make a core for a bud.
Attach the core to the wire or skewer with glue.
Around the base, attach the petals in turn, collecting the bud.
From a green leaf, cut a strip for the stem and wrap it around the wire, securing the petals. Leaves can be cut from the same sheet and also attached to the stem with glue. The bud is ready.

Corrugated paper can be used to make several colors for decorating a car.

How to make a bow on a wedding car yourself?

Usually a large one is attached behind the car. fluffy bow. These bows are the easiest to make. Any fabric is useful for manufacturing: satin, tulle, felt.

A master class on how to make a satin bow in just a few simple steps. For it you will need: a piece of satin, tape for fasteners.

Stages of work:

The fabric should be flattened on a table or other hard surface.
Then fold it in three so that you get a strip. It is better to fold inward so that the edges of the fabric are not visible.
Mark the middle of the strip and bend the edges so that they lie crosswise, while leaving an untouched part of the strip between them.
After that, the fabric in the middle is gathered together and tied with tape. Adjust the edges, and the satin bow is ready.

Another version of the bow is made of felt. For it you will need: felt of two colors, for example, white and pink and different size, rubber bands, glue gun.

Felt bow for a wedding car

Stages of work:

A large piece of felt must be folded with the edges to the middle and fasten the edges with a glue gun.
Then, at the place of gluing, the fabric is collected and pulled with an elastic band. It turns out a bow.
The second cut is superimposed on top and folded in a similar way so that the assembly place for both cuts coincides. Tighten again with a rubber band.
The elastic can be covered with a satin ribbon or a decorative element, such as a decorative butterfly or flower. The bow is ready.

And if you dress up the car in a wedding hat?

wedding hats- the groom's top hat and the bride's hat or veil are also a great option for car roof decor. How to make a hat with your own hands? You will have to sweat a little here, but the result will be worth all the effort. For a hat you will need: three sheets of drawing paper (one A1 and two A2), PVA glue, glue gun, Moment glue, fabric for a hat (at least 1 by 1.5 meters, preferably water-repellent), three meters of white tape, newspapers, thick ribbon , cardboard.

Wedding hats on the roof of a wedding car

Stages of work:

Hat base. Two circles with a diameter of 26 and 37 centimeters are cut out of sheet A1, with a margin for fasteners. The two remaining sheets of whatman paper are fastened together in the form of a tube using a glue stick. Prepared circles are attached to it from two sides - this is the bottom and top of the hat.
PVA must be diluted with water in a ratio of one to one. Then the newspapers are torn into small pieces, soaked in cooked adhesive solution, and the base is carefully pasted over with them, according to the principle of papier-mâché. The base will need to dry for at least a day. The edges can be shaped by placing the base in the basin and bending the edges up.
While the base dries, you need to sew a cover. A circle with a diameter of 28 cm is cut out of the fabric, two strips - one 12 cm wide and 1.5 meters long, the second - according to the shape of the base plus an allowance for seams. First, the main part is sewn, then a circle is sewn to it. After turn edges. Here you need to be careful, first draw a circle, then sew on sewing machine or sew by hand. The cover is ready.
"Wear" a hat. The finished cover must be glued to the base so that the top sticks, while not staining the fabric and not hooking other parts. After that, the cover is put on in its entirety and fastened at the bottom. It is better to glue the fields pointwise so that the folds are preserved.
From cardboard, you need to cut a circle of the same diameter as the bottom, glue it with the main fabric and attach it to the bottom of the hat with a glue gun, additionally securing it with a ribbon.
The hat is decorated with a white ribbon and other decor as desired. The wedding top hat is ready.

By analogy, you can sew jewelry for the bride, just take a white fabric and reduce all the details. How is this hat attached to the lid of the car? On magnets or suction cups, glue is better not to use for fastening. You can decorate the bride's car with a white hat - it will look beautiful and be combined with the groom's car.

Decoration of car handles in a wedding cortege

Doors are usually decorated buttonholes, but you can decorate the handles with bows or ribbons. Bows can be made by analogy with large bows, only using a piece of fabric of the appropriate size.

Photo of wedding procession decorations

If the wedding is planned in the warm season, then fresh flowers can be used in the decor. But keep in mind that such decorations are short-lived. Therefore, artificial flowers are also quite suitable for decoration.

A video on how to make a decoration on a car for a wedding with your own hands can be viewed at the link:

How to beautifully decorate the car of guests at a wedding with your own hands?

Guests' cars are not given as much attention as the car of the young, but this is not a reason to neglect their decoration. The main rules for decorating guest cars are style match with whole tuple and color combination. If contrasting decorations look great on black or white models, then for bright colors you need to choose color scheme decor so that the decorations are not lost on a bright background. For example, if a guest has a red car, then blue or yellow decorations will suit it.

Video of a master class on decorating a car for a wedding with your own hands:

As you understand, there are a lot of options for decorating a wedding car! The main thing decide on the details and start doing everything in advance.

May 4, 2018, 12:32

Anyone can make a wedding decoration with their own hands. Choose an idea and make your wedding unique.

A wedding is a wonderful celebration that happens in the life of every person. To make this event perfect, you need to take into account all the little things, from the ransom of the bride to the decoration of the hall for the celebration.

Decoration of the wedding cortege is an important moment, because guests and the bride and groom will go in cars
The task of decorating cars is to create a special mood - a holiday, luxury and magnificence.
Wedding cars are an essential attribute of any wedding ceremony.

Stylish and original decoration It will work if you use a combination of different textures and materials. Together with ribbons, organza and satin are often used to decorate cars. The fabric composition looks presentable and festive.

How to decorate a car with ribbons for a wedding with your own hands? There are several ways:

The first type of decoration

Take a tape measuring 2 lengths of the hood, and a width of 3cm to 5cm
Pull the tape through the grille so that the middle metal bar of this grille is exactly in the middle of the tape.
Stretch the tape in different directions of the hood to form the letter V, and secure it under the hood with tape or a linen elastic. Can be tied to any internal part of the hood
Now make bows or flowers small size from organza or satin. How to make original bows is described in this
The number of bows depends on your imagination: tightly spaced decor on the ribbon or at a distance of 10-15 cm. Fasten the bows on the ribbon with a thread and a needle. Between the flowers, tie pieces of ribbon to match the colors (white or pink). When driving a car, they will develop beautifully
From a piece of white organza, make a large bow, and attach it to the radiator grill. The ends of this bow should hang almost to the level of the wheels.

Instead of a bow, you can attach a bouquet of artificial flowers to the grille.

At the back of the car, make the same bow as in the front, and attach it to the trunk door. If there are many flowers on the hood, then a small bouquet of flowers will look beautiful on the back.

Remember: All decorations on the car must be made in the same tone. It looks ugly when the decoration is white-pink in front, and blue in the back.

The second way to decorate

Take a piece of satin or organza 20-30 cm wide. The length should be two lengths of the car hood
At a distance of 30 cm along the entire length of the cut, attach flowers from a satin ribbon
Attach the decoration to the hood and tailgate

The third way to decorate wedding cars

Make flowers from white and green satin ribbons
Collect several flowers in a bouquet, and leave 7 or 9 pieces to decorate the ribbon
Attach 4 air ribbons to the bouquet, and fasten them under the hood of the car. The bouquet must also be attached with adhesive tape.
Distribute the flowers along the entire length of the ribbons and fasten them

How to make a do-it-yourself decoration on a tuple is shown in the following video.

Video: Car Decoration_Option B

Ribbon jewelry options are presented in the video below.

Video: Ribbon decorations on the car

Every woman and even a man can make a bow. It is enough to take a large piece of tulle, fold it and tie it arbitrarily. It will turn out a beautiful bow, but it must be attached on all sides to the car with adhesive tape, otherwise this beauty will develop in the wind, losing its original shape.

A blank made of floral felt will be much stronger and more beautiful. Steps to create a large bow on a wedding car with your own hands:

Take a piece of felt of the right size
Fold its edges to the middle and glue or sew
Gather the workpiece with an accordion and tie in the middle with a ribbon
Now take a smaller piece of felt in a different color. Do the same with it as with the previous workpiece.
Fold the bows together and tie with a ribbon in the middle
Sew a golden butterfly, heart or flower in the middle - the bow is ready.

In the video below, you can clearly see how the designer folds and assembles the blanks together.

Video: Easy, fast, cheap! do-it-yourself giant bow made of felt for a wedding car

You don't have to be a designer to decorate a wedding car. It is enough to have an idea, and be able to hold a thread with a needle in your hands. It is not necessary to be able to sew on a sewing machine, making decorations is easy by hand.

How to decorate the hood of a wedding car with your own hands was described above. Here are some ideas on how you can decorate the front of your car:

Door handles on wedding cars must be decorated with flowers or bows to match other decorative elements on the motorcade. Prepare the materials that you have left from decorating the hood and tailgate. Add a floral grid, some satin, felt and other fabrics that you have in the house.

Follow these steps to make DIY wedding car handle decorations:

Take a piece of organza measuring 25x70 cm
Assemble the bow: with your left hand, gather the fabric between two fingers right hand. Secure it in the middle with an elastic band.
Make a second similar bow. Fasten the two parts and tie a few ribbons of one or two colors
In the middle of the bow, sew a satin flower, heart or other decorative element. To fasten parts, instead of a needle and thread, you can use superglue

Tip: This method is suitable for creating decorations on felt, satin or floral mesh handles.

See clearly how to make such a bow in the video below.

Video: How to make a bow on the handles of a wedding car yourself?

Each brand of car has a certain size of the hood. You need to make wedding decoration of the car, based on the size of the hood and its other parts.

First, measure the length of the hood of your wedding decoration machine, and then proceed to create them. Dimensions of the hood of some car brands:

Toyota Avalon: length in the center of the hood 105 cm, near the headlights 95 cm, width 145 cm
Mercedes "W212": length 175 cm, width 150 cm, near the headlights 90 cm
Ford Focus: length 80 cm, width 60 cm
Audi A3: length 100 cm, width 150 cm

Important: In order not to make a mistake when creating decorations, first measure the length and width of the hood of all the cars that will be in the tuple. Based on these sizes, sew ribbons and other decor.

The traditional decoration on the roof of the car is two rings in flowers. But now you can meet a wedding cortege with hearts, a basket of flowers and other decor.

Decoration on the roof of a wedding car in the form of two rings is easy to do with your own hands. To do this, follow these steps:

Cut the soft water hose into 3 pieces of different sizes. The small and middle part will be rings, and the largest great detail- the basis for the design
Insert a battery into one end of the ring, hold it with your finger. Then put the other end of the hose on it and secure the joint with tape
Make the second ring in this way.
Wrap the rings with gold floral foil
Use superglue to secure the two rings. Glue them to 15 cm wooden rulers, and fix the blanks on the largest third cabin
Decorate the design with fresh or artificial flowers. The accessory is ready. Attach it to the roof of the car with adhesive tape

There are many other options for decorating the car of the newlyweds:

Do-it-yourself decoration on the roof of a wedding car - swans

Do-it-yourself decoration on the roof of a wedding car - hats

Do-it-yourself decoration on the roof of a wedding car - hearts

Do-it-yourself decoration on the roof of a wedding car - doves

In the video below, you will see many other options for decorating the roof of the newlyweds' car.

Video: decorations on the roof of a wedding car

The modern fashion for decorating wedding cars has gone so far that many people already prefer not just making rings on newlyweds' cars. They come up with original jewelry that emphasizes the individuality and high status of the future husband and wife.

Make a crown with a veil from rings for a car for a wedding with your own hands:

Make 6 rings: 2 small, 3 medium and 1 large. Carry out this decoration as described above, as for two rings of soft hose and special foil
Glue the blanks on a ruler 50 cm long
Attach the resulting structure to the roof of the car
Decorate the design in the form of flowers in front and a veil in the back - the original ring decoration is ready

Do-it-yourself rings on a car for a wedding - crown

Tip: You can make a crown out of cardboard by painting it in gold or silver. Do not be afraid to fantasize, and your wedding guests will remember for a long time!

Now in the wedding cortege they decorate the mirrors of cars, before they managed only with decor for the hood and roof. Make decorations on the mirrors of wedding cars the same as decorations on the hood. Thanks to this, the entire decor in front of the car will be in harmony.

Tip: If you made a bouquet of 15 flowers on the hood, then a bouquet of the same flowers, but smaller, is suitable for the mirror. By quantity, 5 or 7 pieces are enough.

To create a bouquet, you will need cardboard, superglue, artificial flowers and some fabric in a contrasting color. Cardboard is needed for the base on which the entire bouquet will be attached.

So, prepare flowers to make bouquets for a wedding car with your own hands:

Cover the cardboard with fabric and secure with tape or glue
Arrange large flowers along the edges of the base, and small flowers in the middle. Glue one large bud in the center, but you can do without it. Do whatever your fantasy tells you
If there are leaves left from the flowers, glue them along the edges of the workpiece
Now attach the bouquet to the ribbon on the car - the decor is ready.

Tip: A bouquet of flowers in contrasting shades will look beautiful, for example, white and red, pink and red, white and pink, and so on.

Video: Do-it-yourself wedding boutonniere on the car door video Master class

Video: Do-it-yourself wedding car decoration.

As mentioned above, along with ribbons, the newlyweds' car is decorated with tulle. Bows, flowers, imitation veils and more are made from it.

Here is another way to decorate a wedding car with your own hands with tulle - pom-poms attached to a satin ribbon:

Cut the tulle into rectangles 10-20 cm wide, depending on the size of the pompom, 50 cm long
Put all the rectangles together and add one rectangle in a contrasting color.
Fold the fabric like an accordion
Tape the middle
Spread each layer to make the workpiece lush
Cut the edges in a semicircle or zigzag, according to your imagination
Straighten all the layers again - the pompom is ready

In the video, the designer tells how to make a beautiful tulle pom-pom.

Video: How to make pompoms from tulle?

Another way to make a tulle pom-pom is described in this video.

Video: How to Make a Tulle Pom Pom Easy - DIY Style - Guidecentral?

Newlyweds like to decorate the car with big hearts, because it is a symbol of long and true love. It is easy to make such a heart both from artificial flowers and from real roses.

Important: If you will make such a decor from living material, then choose fresh, just blossomed buds. Otherwise, the flowers may quickly wither.

How to make hearts on a wedding car with your own hands:

First, make the base: cut out a heart from paper, and then transfer the pattern to cardboard
Apply glue to the cardboard heart. Crumple up old newspapers or sheets of magazines, straighten them a little, and attach them to a cardboard blank with glue - this is necessary to add volume to the heart. When all the cardboard is filled with paper lumps, seal the entire blank with tape
Wrap the future heart with red lining paper or floral felt, and secure all edges with a stapler.
Cut off the stems of the flowers to make a smooth base.
Now glue one flower at a time to the red blank, pressing the flowers tightly against each other
When the entire surface of the heart is filled with flowers, sprinkle the buds with water and sprinkle with floral glitter. After that, you can attach the heart to the car
Using the same technology, make a white heart, but wrap the paper blank not with red, but with white cloth

The following video shows how you can make a big heart out of fabric roses, which are also handmade.

Video: How to make a big heart with your own hands?

Wedding chores are pleasant, but this fuss is a little unsettling, and the newlyweds themselves and their parents often do not know what to do and where to start, for example, when decorating cars. step by step will help to outline the scope of work and their sequence.

If the car is decorated with tulle and artificial flowers, then you need to make rosebuds in advance
Measure the length of the hood and cut required size ribbons or tulle. Get your elastic band ready
Make two rings on the roof of the car, as described above, or any other decor
From flowers of a smaller size, make bouquets for car handles and its mirrors
If there is a flower basket on the tailgate, then make it in advance. How to make such a basket, read the article about DIY bouquets
If, as planned, a bow is located on the trunk door, then buy tulle in advance and make this decor
In the morning, on the wedding day, start decorating from the hood of the car: pull ribbons or tulle and fasten it under the hood. Attach flowers along the entire length of the tape, and place a bouquet of flowers on the radiator grill
Now start decorating the back of the car: fasten the tapes, attach a bow with a stapler or tape, or install a basket of flowers
Decorate the roof of the car: install a structure with rings or other decor, fix it
After that, you can start designing door handles and mirrors
Check if all parts are fastened well. If in doubt, strengthen the fastening, because it is important that the structures and bouquets are installed beautifully, correctly and firmly.

The hood of the newlyweds' car should be flawlessly decorated, because people immediately pay attention to this part of the wedding car when the cortege drives up to the bride's house or to the registry office.

How to properly and firmly fix the fabric on the hood of a wedding car, and attach decorations? Some nuances should be taken into account:

High-quality car decoration for newlyweds is a difficult task that requires certain skills and devices. But you can handle it on your own
In order for the ribbons to hold well on the hood, it is necessary to process one edge and sew a linen elastic to it. The second end of the elastic is tied with the tape under the hood or sewn to the other edge of the tape
You can attach decor to ribbons (bows, flowers, etc.) using superglue
Large decorations in the form of hearts, flower baskets or bouquets, tie tightly to car parts: to the radiator grill, to handles and mirrors
To attach a large bow to the tailgate, first stretch the ribbons, and then tie a bow to them

Live as a decor on the car look great. They create a special festive energy, emitting a unique aroma.

If you think that dolls, artificial flowers and just a few ribbons on the hood are trite, then decorate the wedding car with fresh flowers.

Important: A bouquet of fragrant roses for the bride, flowers in her hair, decorating the hall with live bouquets and decorating the car of the newlyweds with fresh, recently plucked buds, will emphasize the high status of the newlyweds.

Tip: If the car is large (convertible or limousine), decorate it with flowers on the inside. The unique aroma will accompany you all the way.

Even delicate flowers will stand the test of movement if you use a special sponge with water to make bouquets. You can buy it at any flower shop.

Tip: Place the decor in such a way as not to block the driver's view.

If you think that you won’t be able to make such an original decoration on your own, contact an experienced florist who knows the language of flowers and understands decorating.

Balloons are the most inexpensive type of decoration for a wedding procession.

Tip: Buy only quality latex balloons from trusted or well-known manufacturers. Chinese counterparts can burst when driving cars.

Decorating wedding cars with balloons is easy to do with your own hands:

Make a garland of balloons by tying them to each other. Make this decor with balloons in two colors, for example, red and white, pink and white, and so on.
Tie a garland to the hood of the car and several of these products to door handles and mirrors

Remember: Jewelry should not interfere with the driver while driving!

If you are planning to do it in Retro style or the theme of your celebration is “Love is…”, then decorating cars with balloons will be the brightest decoration for the cortege.

How to make a heart out of balloons is described in detail in the following video.

Video: Balloon Heart - Wedding Decoration

When decorating a wedding procession, much attention is paid to the decor of the newlyweds' car. Therefore, the question often arises: how to dress up, decorate the car of guests for a wedding?

Remember: All cars must be decorated in the same style.

On guests' cars, it is enough to attach bouquets with flowers to the door handles and mirrors. If you want, then you can trim the hood with ribbons. In any case, cars for guests should look more modest than cars with young people.

Think about decorating cars in advance so that before the wedding itself you don’t fuss, worrying about what design will be and what materials to buy.

Here are examples of decorating wedding cars - photos:

Examples of decorating wedding cars Examples of decorating wedding cars - a heart with an arrow of balloons

Examples of decorating wedding cars - a carriage with flowers

There are a lot of options for decorating cars, and even carriages for a wedding. Choose suitable option, add your imagination, and create real design masterpieces!

Video: Original and beautiful decoration of wedding cars.

A wedding is a significant event that involves painstaking and laborious preparatory work. For everything to go perfectly, the bride and groom spend a lot of time thinking through every detail of the celebration. An important step in preparing for a wedding event is an order and decoration motorcade, in which the newlyweds with guests will travel around the city. A lot of ideas can be realized by future spouses, decorating a festive car, but the most popular is decorating a car with a cloth. Let's see how to make it beautiful.

Options for decorating a wedding car with a cloth

Decorating a wedding car with fabric is a classic that has been used by couples from all over the world for many years. It is easy to explain such popularity of fabric decor - it looks elegant, elegant, does not require too much expense and is perfect for a celebration of any style and theme. The design of the material can look both simple and modest, and magnificent, pretentious. When choosing a method of fabric decoration of a cortege for a wedding, it is important to take into account several nuances:

If the vehicle is provided transport company, before confirming your order, make sure you are allowed to decorate the car yourself. In practice, there are cases when the heroes of the occasion order a wedding procession, on which even ordinary satin ribbons cannot be attached due to the expensive paint covering the body of the vehicle.
Future spouses rarely order only one car for themselves, so you may need more cars for guests who go to the registry office or for a walk. A column of vehicles of the same shade (white, black or silver) looks good. When choosing brighter colors of cars, you should give preference to not too pretentious decor. The abundance of "flashy" shades will look tasteless.

If the motorcade is made up of cars of close relatives with friends, it is worth making sure that cars of discreet classic shades - black, white, silver - lead the column. It would also be appropriate to give the leading positions to beige, burgundy, dark blue cars. The column must be organized so that all bright cars or airbrushed cars are behind.
The chosen design must necessarily contrast with the color of the car. So, for dark cars, light, delicate decorations are more suitable, and for white cars, bright details of decor are more suitable. If the car of the newlyweds is colored, the gamut must be selected in accordance with its shades.
The fastenings of all decorative parts must be reliable so that when driving fast or strong wind they were not torn off, and did not block the driver's view.
An excellent solution for both a classic and a themed celebration would be the choice of a retro car, but the design of such a car has its own characteristics. You should not decorate a car with too bright details, pile up colored fabrics on it abundantly. The best option there will be a modest decor of the cortege for the newlyweds with satin ribbons or fabric bows.

If the future spouses have chosen fabric car decor, this does not mean that other accessories cannot be used to decorate the motorcade. Together with fabrics and ribbons, the following decor elements can make up the composition: air balloons, fresh flowers, artificial plants, plastic figurines of the bride and groom, rings, diadems, pearl threads, paper garlands.

Ribbons of fabric for decorating the hood in the shape of the letter V

Decorating the car with ribbons attached in the form of the letter V looks elegant and elegant. This decoration option is inexpensive, and therefore the V-shaped decor with fabrics is suitable even for a budget wedding, but this design looks festive. Decoration with ribbons in the shape of the letter V will look especially good if you use additional accessories - for example, butterflies, flowers, floral bows. In the center of the composition you can place large wedding rings, figurines of the bride and groom.

Tapes stretched along the entire length of the car

Newlyweds can only decorate the hood of the car, but ribbons stretched along the entire length of the car look more interesting. This decor looks especially solemn, allows you to create beautiful, original compositions. When decorating, ordinary satin ribbons can be used, which are attached to both sides of the car, or large tulle fabrics with drapery on the hood. It is necessary to ensure that the decorative details do not cover the windshield. As an additional decor, the bride and groom can use fresh flowers, figurines.

Roof decor with lush tulle or tulle

Fabrics such as tulle or tulle, decorating the roof of wedding cars, look airy, light, and gentle. It's simple and the right way to create a beautiful festive decoration of transport at a wedding, which takes a little money and effort. For example, newlyweds can place tulle or tulle on the roof, and hoist a decorative diadem on top. So the design will resemble the headdress of the bride. Next to the makeshift "veil" may be the groom's hat.

Veil stretched diagonally across the bonnet

The laconic design of the wedding cortege with a veil covered diagonally across the bonnet looks elegant, emphasizing the refined taste of the heroes of the occasion. As a rule, translucent materials are used for such decor - tulle or tulle, which are gathered at the windshield. At the fabric assembly site, the bride and groom can place some accessory. For example, a small flower arrangement, a butterfly or other decorative details. It is easy to fix such an ornament, it will be held by the hood cover.

Decorating a car with fabric bows

Bows are a decorative detail that is always associated with celebration and fun. They are well suited for decorating wedding cars. Bows can be decorated with a car hood, roof or bumper. As a decoration, many small bows or one large one will look great. The bows located on the door handles of the car will complement the laconic decor.

Video tutorial on decorating a car with a do-it-yourself cloth

Newlyweds can apply for a wedding procession to a special agency or decorate the car with their own hands. The second option will cost the bride and groom cheaper, will allow to realize own fantasies. To beautifully arrange cars for a wedding, future spouses can use the video tutorial below. Heroes of the video for contrast with dark shade cars used lilac and purple fabrics, artificial flowers. The original solution was to attach an unusual device for creating soap bubbles to the bumper of the car.

Photo of wedding cars decorated with fabric

To create the perfect wedding car décor, the newlyweds must explore ideas that have already been implemented before. Fabric decoration is often combined with car decoration with balls, flowers, figurines and figurines, rhinestones, beads. View a selection of photos from original decor wedding procession with fabrics and choose the perfect option for yourself.