The company Teplodar was founded 20 years ago. After 3 years since its inception, it has become recognizable and popular in the bathing market. thermal equipment and fireplaces of Russia. Close attention is paid to creativity and the introduction of new ideas into manufacturing process, special selection of suppliers, careful study of the latest trends, innovative technologies, as well as the establishment of an optimal pricing policy. Today, the company is represented in the market segment with a wide range of more than 20 basic models, as well as more than a hundred different modifications.
Furnaces for a bath Teplodar
are produced under high quality control, materials are used that strictly comply with the technical criteria of the product, production is carried out on modern equipment meeting international requirements and standards. Most inventions are so unique that they are protected by patents. This smart heating technology is durable, efficient and reliable. Equipped with a sturdy construction, high degree of heat dissipation, modern unusual design, as well as economy and rationality, for example, as sauna stoves with a water tank, the prices of which will only pleasantly surprise you.
Each heating product from this company is the successful result of the daily painstaking work of high-class engineers and creative designers who combine functionality and brilliant style.
We always value the choice of our customers, therefore we offer a wonderful favorable price-quality ratio. If you want to buy a stove for a wood-fired sauna in our store, you will also be offered delivery in Moscow, the Moscow region, as well as to any locality in Russia. In addition, we offer installation, which will be carried out by professional staff.
In our online store the most a large assortment in Runet heating stoves, stoves for baths and solid fuel boilers. The widest range of furnaces and boilers of domestic and foreign production since 2012 is presented at your choice. We are official dealers of more than . All products purchased from us are covered by a factory warranty! Experienced managers will help you find everything you need
We also provide services for the installation of stoves, chimneys, finishing baths and installing heating systems. When ordering a service from us, you will receive an additional discount of up to 7% on a heating device. Installations are carried out by permanent crews that have proven themselves, if necessary, we provide licenses from the Ministry of Emergency Situations for the installation of chimneys.
To date, more than 12,000 products are presented on the site. The prices on the site are relevant, the line and assortment of goods are replenished monthly.
Using our own transport, we deliver orders in Moscow and the region within 24 hours, and through transport company Let's carry out delivery across all Russia and the neighboring countries.
For more than seven years they have been in constant demand among buyers and are popular in the market of heating units. Designed by experts and built with respect specifications, sauna stoves"Teplodar" differ in their power, purpose, cost, appearance and are mainly purchased by buyers for home Russian baths and saunas.
Design features
The scheme of the wood-burning stove "Teplodar" for a bath
It is not in vain that these stoves have won the hearts of many bath lovers: they have several features that positively affect their characteristics:
- The main parts of the firebox are made of 2-4 mm stainless steel sheet containing at least 13% chromium. In places of the greatest load, steel with a 17% content of alloying metals is used. This is the only manufacturer in Russia that produces such thick-walled stainless steel stoves.
- The perforated steel casing-convector contributes to the rapid heating of air and stones. But for heating it uses a minimum of fuel.
- The built-in steam generator can produce light steam already half an hour after the start of the furnace fire. This allows you to create a humidity regime typical of a Russian bath (not all models are equipped with it).
- The dosing taps on the water tank allow you to control the water supply to the heater and control the humidity level in the room.
- Almost all fuel units can be retrofitted gas burner(in the presence of an elongated firebox). This option is convenient if it is possible to connect to the main gas pipeline.
- The average bath time is 50 minutes.
Overview of some models
The Teplodar company offers a diverse range of thermal units, consisting of 10 basic models (there are five times more modifications). Models are focused on creating a wet or dry mode (for baths and saunas). There are also combined options stoves that are simultaneously suitable for both types of steam rooms.
Connoisseurs of an ordinary Russian bath with an optimal balance of air humidity and temperature will like the Rus stove models, its updated version Novaya Rus and Kuban.
Sauna stoves "Rus"» are distinguished by a rectangular firebox with smoothed corners. Above is a stone open type from the center of which the chimney exits. They are designed for a standard steam room volume of 4–18 cubic meters.
The heater holds from 25 to 105 kg of stones, a casing-convector, a high-speed steam generator with a water supply dispenser (in some models) - all this contributes to maintaining a stable balance of humidity and air temperature. You can choose a stove with a shortened or extended combustion channel to organize the optimal combustion method. It is possible to order the design of the fuel chamber door in two versions: panoramic heat-resistant glass or a conventional self-cooling steel door. On request, gas burners can be installed on the Rus units of the 12th and 18th modifications.
Stoves for the bath "Rus" (left) and "New Russia" from "Teplodar"
Oven "New Russia"- this is the same "Rus", but improved. Transformed appearance, the heater has been improved - it has become even larger, and the stones warm up even better. The updated design has reduced heat load on the chimney and increase the heat transfer of the unit itself. Furnaces are completed additionally with a mounted tank or a heat exchanger with an external tank of 60 or 80 liters.
If you like experimenting with vaping modes, then choose wood stove "Kuban". It is equipped with a closed and open heater at the same time and quickly heats up the room. Moreover, a device is built into the closed heater automatic feeding water on the stones due to this, a dry light vapor is formed, invisible to the eye. Thanks to him, the humidity regime of the Russian bath is created. Suitable for steam rooms 10-20 cu. m., additionally equipped with a mounted tank of a suitable volume or a heat exchanger with an external tank of 60 or 80 liters.
Sauna stove "Teplodar Kuban"
A kind of symbiosis is stove "Domna"- it is suitable for both baths and saunas with a steam room volume of 10–25 cubic meters. m. It has an elegant combined case: the front and rear walls are made of stainless steel with convection holes, and the side walls are in the form of a grid for 140 kg of stones.
Such an unusual design of the furnace ensures efficient heat exchange, and a large number of stones gives soft warmth. But main feature"Blast furnace" is a vertical fire chamber of a cylindrical form in which the closed heater is located.
There is a special funnel for supplying water into the heater, which makes it possible to obtain light steam. There are 2 cleaning holes. They will greatly facilitate the care of the stove.
The built-in dispenser with atomizer distributes water evenly over the hottest layers of stones, which provides easy steam. The built-in heat exchanger and a water tank are got in addition.
The furnace for a bath "Teplodar Domna" has an interesting design
On the sauna stove "Domna" (excluding the modification with a panoramic firebox door) gas burners can be installed.
Draws particular attention stove for baths and saunas "Siesta", which combines several directions at the same time. It can not only heat the steam room, but also admire the process through the fireplace door and even cook a barbecue. This most unusual representative of the Teplodar series of stoves is designed for a steam room volume of up to 20 cubic meters. m. They are equipped with a vertical firebox, which is closed from different sides by a convector.
The closed heater is located at the rear of the stove. The upper part of the unit is a louvre grille and air ducts for heating an adjacent room. The stove is equipped with an anti-smoke and glass self-cleaning system, a built-in steam generator, gates in the door and chimney to control the combustion process.
Sauna with barbecue "Siesta" from Teplodar
The set includes a grill grate, an iron sheet to cover the grate during cooking.
A little soot will still settle on the door, even despite the glass self-cleaning system. In order for the soot to burn out, it is necessary to open the air supply regulator as much as possible and kindle an intense fire. The temperature of the air leaving the corrugated hoses can reach up to 150°C, so it must not be directed onto wooden surfaces.
No less popular innovative model wood-burning stove "Sahara", which is equally suitable for different types steam baths and saunas. The thermal unit is available in 5 different versions for heating steam rooms with a size of 4–24 cubic meters. m.
The furnace body has an octagonal shape due to smoothed corners. The outer casing can be made of mirror stainless steel.
Different versions of the heater: two-chamber in "Sahara 10" and domed in the models "Sahara 16", "Sahara 24" and "Sahara Profi". The Sahara 10 oven is equipped with a 33-liter removable water tank, other models are equipped with samovar-type tanks and heat exchangers for an additional fee. The combustion channel door can be made of self-cooling steel or SCOTT ROBAX heat-resistant glass.
The sauna stove "Sahara Teplodar" is available in different versions
Grid oven "Siberian Cliff" designed for heating saunas with a size of 10-20 cubic meters. m. has a classic shape of a firebox, around which there are 180 kg of stones in a forged mesh bandage. All models of this series are equipped with a perforated convector and a built-in steam generator with a stainless steel funnel to supply water to the stones.
With this unit, you can set any humidity mode in the sauna: you can install a dosing tap on the water tank. With its help, by changing the speed of water supply, automate the supply of water to the heater.
Furnace mesh for a bath "Siberian Rock Teplodar"
As an additional option, this model can be purchased with a panoramic door made of translucent and heat-resistant glass SCOTT ROBAX, as well as understaffed with a water tank of various sizes. It is possible to install a GGU (gas burner) on the Siberian Cliff 20 LP Profi model.
Attention! Do not supply water to the steam generator when the heater has cooled down, as well as pour more than 100-200 grams into the funnel at a time or do not observe the frequency between water supply of less than 2 minutes - this will lead to incomplete evaporation of water and simply flood the heater.
Another option for a classic Finnish sauna is the oven "Siberia". It heats up the sauna to 100-120°C in just 30 minutes and creates high air temperature and low humidity in the steam room. Exactly what a classic Finnish sauna needs.
The furnace is designed for rooms with a size of 10–20 m 2. There is an option for commercial use: for rooms with a size of 20–30 m 2, the Siberia Profi model is intended. Models for small saunas have a weight of 44 to 59 kg and can accommodate stones weighing 55 kg. You can purchase the Siberia Panorama modification with a 17-inch heat-resistant glass fireplace door or with a built-in heat exchanger for an external tank.
The sauna stove "Siberia" will quickly heat up the steam room
For heaters "Rus", "Sahara" and "Siberia", the manufacturer offers to purchase a mesh for the heater, with which you can steam a bath broom. To do this, the Teplodar mesh is installed on top of the heater, and a broom is placed on top, pre-dipped in water. To steam a broom, it is enough to pour water over hot stones a couple of times - the steam released in this case will bring the broom to the desired state.
Installation of the furnace "Teplodar"
Scheme of installation of one of the Teplodar furnaces. Recommendations are included in every passport
- the safe distance from the fuel unit to walls made of combustible materials should be at least 500 mm to the sides and back, 1250 mm forward and 1200 mm upwards, but when used, this distance can be reduced by 4 times with a gap of 30 mm to combustible surfaces;
- a brick screen is installed 5 cm above the stove;
- in front of the furnace door, the floor of combustible materials should be protected with an iron sheet.
How to heat the Teplodar stove
It is necessary to heat the stove for the first time for at least 1 hour with the windows and doors of the bathhouse open. In this case, the load of the firebox should be maximum, the heater should be empty, the water tank should be full. During the first heating, technological compositions and oils that were used in the production process burn out.
After the stove has cooled down, drain the water from the tank and ventilate the room. After the final cooling of the furnace, you can load the stones into the heater.
During further operation, follow the rules:
- melt using dry small chips or birch bark when loading 2/3 of the furnace volume;
- during the fire, put firewood on the grate, and not on the combustion channel (if the modification is with an external firebox);
- do not burn construction waste with paintwork, plastic, rubber and other materials that emit harmful substances;
- after the appearance of good traction and the burning of half of the fuel put in, additionally fill the firebox by 2/3 of the volume and fully open the ash pan;
- after the room has warmed up, cover the ash pan and use 2–3 logs per sling to maintain the temperature: in this mode, water, stones and air in the bath will “keep” their temperature;
- after the end of the bath procedures, it is necessary to heat the stove again and dry the room by opening the door and ventilation windows.
Attention! For safety reasons, when throwing up the next batch of firewood, you must first completely close the ash pan, and then carefully open the firebox door.
Read more about how to install a metal furnace in the article. Many useful information can be found in the article on sandwich chimneys.
The influence of the middle name on the name Yuri
Name Ilya - meaning and contraindications
Baby keeps crying
What does the name Aidar mean, the mystery of the name
Name Ilya - meaning and contraindications