A downhole pump, by definition, cannot be cheap. When working in a filter well, it is regularly exposed to particles of sand and silt, and water has to be delivered from artesian structures to a sufficiently high height.
In search of a reliable device at an affordable price, owners of private plots most often choose a water pump manufactured by the company "Dzhileks". In this material, we will consider in detail the device and the principle of operation of the equipment, we will talk about the features of its selection and use.
Pumps "Vodomet" have a fairly wide range of applications. With their help, you can pump water from wells of various depths, as well as from wells and open reservoirs.
They perfectly cope with the autonomous water supply of a private house, are used for watering the site, garden, etc. In this case, the diameter of the well should be 100 mm or more.
The case is made of high quality stainless steel. The top point of the pump is sealed in such a way that during its operation sand and other contaminants do not enter the casing from above.
The pump motor is enclosed in a sealed glass filled with oil. This design eliminates Negative influence external factors and protects the engine from damage.
The design and dimensions of the “Vodomet” pump allow it to be installed in wells with casing pipe diameter 100 mm or more
The device is oil-filled, asynchronous, the motor rotor is squirrel-cage, mounted on rolling bearings. The motor is partially protected from overheating by a thermal protector built into the stator winding. In addition, an additional cooling factor is water passing through a special annular gap left between the housing and the motor stator.
To balance the external and internal pressure of the engine, a special membrane is used. This allows the motor seal to be unloaded. As a result specifications allow you to use the pump "Vodomet" at a depth of up to 30 meters. The top and bottom covers are arranged in such a way that all components of the device are in correct position about the central axis.
An important feature of the pump design is the presence of so-called “floating” impellers, which have the ability to run in. efficiency of traditional pumping equipment largely depends on the size of the gap that is formed between its moving and static parts.
The larger such a gap, the more internal fluid leakage occurs inside the device, and the lower its efficiency. During the operation of the pump, the moving elements are gradually erased, which increases the clearance, and the efficiency becomes even lower. The design of the "floating" impellers of the "Vodomet" pump gives them the ability to move in the axial direction.
Deciphering the markings of various models
The marking of the pump in the form of letter indices reflects the design features of individual models:
- "BK"– the cable length of this model is 1 m.
- "BUT"(automatic) - the presence of a float switch that prevents the situation of "dry running".
- "PROF"– pumps for wells without an automatic shutdown system.
- "M"(main) - equipped with a fitting that allows you to use the pump on the surface, as an element of the water supply system.
- "HOUSE"- additionally equipped with components for the organization of automated water supply of a private house.
- "H"- Availability electronic system automatic control pump.
Devices marked with the index “A” can be installed in wells or other structures where there is sufficient free space for mounting a float switch.
The range of products manufactured by GILEX includes several models borehole pumps with different specifications. This equipment is intended for use as part of domestic and industrial water supply systems with water intake from wells and boreholes. According to users, well pumps from JILEKS LLC are among the best on the Russian market.
Rules for choosing pumping equipment
Efficiency autonomous system water supply with forced water supply depends on the compliance of the technical characteristics of the pumping unit used with the conditions of water use. To do this, it is necessary to make a thorough analysis of all the nuances of the upcoming operation even before ordering the equipment. If you are faced with the question of which well pump is better to choose, consider the following criteria:
- well flow rate and volume of water consumption, the maximum number of inclusions per hour;
- temperature of the pumped liquid;
- parameters of the existing electrical network;
- water quality, presence and size of mechanical impurities;
- possible immersion depth for the submersible unit.
One of the most popular borehole pumps of the JILEKS company is the VODOMET centrifugal submersible unit. This equipment is available in several modifications, which allows you to choose a device with optimal technical characteristics for specific conditions of use. Each model is distinguished by high reliability, unpretentiousness, efficiency, and has a high efficiency. When choosing, use the online consultation of our company's specialists. Channels for communication are given in the "Contacts" section.
The pump "Vodomet" for a well is a multi-stage equipment with floating impellers washed by water. Water cooling is one of the important factors which prolongs the life of the device.
Description
The design includes a built-in condenser, which is necessary for supplying water from the well. His inner diameter may be 100 mm or more. It is noteworthy that such a device is suitable for working in wells that contain an increased amount of sand. These pumps can be used with the level control of the tank or the level of liquid pumped out from the automatic pressure control system. Not only a well, but also an open reservoir, as well as a well can act as a source of water supply.
Feedback on the choice of model
If you decide to purchase a Vodomet pump for a well, you should be aware of the criteria by which this equipment is selected. According to users, it is important to pay attention to the numerical designation, the first digit indicates the maximum one minute output in the absence of flow resistance. Looking at the second number, you can understand what is the maximum head in meters developed by the equipment when working "to a dead end".
If you have a pump of the Vodomet 60/52 brand in front of you, then, according to buyers, this indicates that with a free spout, the equipment is capable of supplying 60 liters of water per minute. This volume is equivalent to 3.6 cubic meters per hour, while when the supply is cut off, the pressure will be 52 meters, that is, 5.2 atmospheres. This unit is almost never used in the limit mode, most often it is operated at the operating point.
The pump "Vodomet" for a well with a maximum flow rate of 115 liters per minute is used for wells and wells with an increased and average flow rate. If there is a need to select equipment for water sources with a high flow rate, then you should purchase an option with a maximum flow rate of 150 liters.
General characteristics of submersible type devices
The submersible pump "Vodomet" for the well has a high coefficient useful action he is ready to serve long time. This equipment has a powerful electric motor cooling system. The design of the pump has a cable that can be pulled through the top cover, which allows the equipment to be used in wells of even the smallest diameter
It is noteworthy that the data submersible pumps can work continuously for a long time, this became possible due to the presence of a built-in water "shirt". It provides water passage between the motor stator and the housing. "Water cannon" is capable of supplying liquid from shallow or great depths. The devices have good tightness and are equipped with a thermal protector, which is responsible for the temperature of the equipment.
Characteristics of the pump brand "Vodomet prof 60/32"
If you are interested in the products of the brand "Vodomet", the pump for the well "Prof 60/32" can be purchased by you. It belongs to the high performance series. Such equipment is suitable for water with a significant sand content. It can only be used in those wells whose depth does not exceed 30 meters. The temperature of the liquid should not be more than 35 degrees.
Consumers who decide to purchase this equipment should be interested in the power of the submersible pump, which is 470 watts. In one minute, it will be able to produce 60 liters of liquid, the maximum amount of pumped sand will be equal to 2 kilograms per cubic meter of water. The products of the brand "Vodomet" have long become popular with Russian consumers, the pump for the well "Prof 60/32" is a confirmation of this. Its body is made of high quality stainless steel, which ensures a long service life of the device. However, in the process of using the unit, you must remember that the pressure should not be higher than 3.2 bar.
Characteristics of the pump brand "Prof 55/50"
When you visit the store, you can find large assortment goods that are manufactured under the brand "Vodomet". The 55/50 well pump can be considered as an example. The depth of its immersion is 30 meters, the power is 680 watts. The equipment must be installed vertically. As practice shows, the engine runs silently, and it is capable of pumping out 3.3 cubic meters per hour. Do not use this equipment for dirty water, otherwise it may be damaged. The size of the particles to be filtered can be up to 1.5 mm and the length of the power cord is equivalent to 20 meters. This information will help you when installing the device.
Characteristics of the pump brand "Dzhileks Vodomet 115/115"
If you are interested in the Vodomet brand, you can purchase a pump for a well 115/115 for 14,300 rubles. This submersible equipment is designed to pump water from a well, while the liquid may be slightly contaminated. The maximum depth, as in the above case, is 30 meters. Productivity is 6900 liters per hour. The advantage is that the device can also be used for small wells. With it, you can water the garden or garden, among other things, it is suitable for water supply in homes. The weight of the unit is 22.6 kilograms, which makes it easy to install.
This pump "Dzhileks" for a well, the photo of which is presented in the article, has a fairly wide area of use. It can be used in tanks, as well as open reservoirs. The equipment is perfectly adapted to difficult Russian conditions. To create it, the manufacturer uses durable and wear-resistant materials. For example, granite and ceramics are selected for. With regard to such important element, as impellers, a wear-resistant polymer is used for them.
Each well in the summer cottage for supply from the depth clean water, must be equipped with a device such as a water jet pump. This device, like a water jet pump, makes it possible to receive water from a well where there is no water.
The powerful technical characteristics of the water jet pump allow you to lift water from great depths. The water jet pump is small in size, has a very simple design, and endowed with the simplest automation.
1 Features and differences
Water jet pump "" regardless of size, models are always made only at domestic enterprises. All pumps of this line are adapted to the Russian climate. And we know that water resources(highways) have never been clean in our country.
As a result, even the simplest water cannon can pump the most dirty water and not fail for a long time. The channels inside the pump are practically not contaminated.
The most important advantage of the pump is that it is able to clean itself. Pumps are also good because, in addition to Soviet components, you can easily pick up spare parts for them from French, American and even German production. At the same time, the price of a water jet pump is much lower than, for example, German or French counterparts.
Now the pump is constantly being improved. The quality of performance is improving, the design has become an order of magnitude better. Here, for example, if we talk about the latest model of a water jet pump for a well, then in it the electric motor is located above the location of the pumping part. As a result, the Water Jet water pump has a body that is an order of magnitude smaller. It became possible to connect electrical cable to the top.
All water jet pumps for wells have a wetted motor. This means that water passes between the casing and the stator sheath. As a result, the engine is continuously cooled.
The water jet pump for the well has high-quality dividing seals. These seals protect the motor and also give a complete seal to the housing.
2 Water jet pump device
The water jet pump for the well has a very strong power. This allows him to provide water not only for a small plot of land, but for the whole house.
We will now analyze the most best models water jet pump.
Submersible model WATERJET PROF 55/35
This model is capable of pumping 3.3 cubic meters of water per hour. Equipped with a 1.5 x 1.5 mm mesh filter. Due to this, it prevents major clogging, which is in the water. This model of a submersible water jet pump is equipped with an overheating relay. The downside is that the float switch is not included.
Pump submersible water jet PROF 55/50
This model is equipped with a powerful 630 W electric motor. The maximum water lift is 50 meters. The immersion of this model can be carried out partially or completely. The maximum diving depth is up to 30 meters.
Submersible pump water jet 60/72
This model fits Russian realities. She has modern design. This model is made of environmentally friendly material. Built-in overheating relay. The set includes a mesh filter. This model is best suited for irrigation of a summer cottage. Has a patented design.
Submersible pump water jet 60/52
This model is the best among all types of submersible pumps. It is designed for pumping clean water. Its main advantage is high efficiency. The maximum head is 52 meters. The power of this model is also very decent - 700 watts. Long power cable 20 meters. Maximum depth up to 30 meters. The submersible water jet pump 60/52 is equipped with a float switch. The body is made of stainless steel. You can buy a Jilex water jet pump of this model in specialized stores without any problems.
Prices for submersible water cannon pumps for wells:
- Gileks water cannon 60/52 A, price from 10,000 rubles;
- The price of a water jet pump for wells Water jet 60/62, 55/50 from 10,500 rubles;
- You can buy a water jet pump Prof 55/35 from 6,500 rubles;
- Gileks Water cannon 60/52, its price is from 9000 rubles.
2.1 Systems of the DOM series based on the Vodomet pump
Everyone country cottage area, and on it private house requires constant water supply. As a result, a system was developed for a constant supply of water. It is called "Water cannon house".
This system provides a constant supply of water to a summer cottage and a private house without human intervention.
The system consists of:
- Pressure sensor and manometer.
- System control panel.
- Hydraulic accumulator.
- Stop valve.
- Water cannon.
Set of the system "WATER HOUSE":
- Submersible pump.
- Pressure gauge.
- Control panel with pressure sensor.
- Hydraulic accumulator. They are water tanks with a volume of about 50 liters.
- Fittings.
- Stop valve.
This system provides constant water pressure. Saving electricity. Equipped with a current overload sensor, as well as a differential pressure sensor. It also has a soft start system.
Borehole pumps Vodomet are produced in Klimovsk and are centrifugal multistage and are designed for autonomous water supply of cottages and summer cottages.
Borehole pumps Vodomet are structurally somewhat different from most borehole pumps. At "Water cannons" the water intake is not from the side, but from below. This scheme allows you to effectively deal with siltation of wells. Pumps "Vodomet" are modified to work in sandy wells and are designed for long work with sand content up to 150 gr./cu.m. In reality, they can pump several kilograms per cubic meter of water.
Water jet pump. Advantages.
A very competent self-cleaning system of the Vodomet pumps allows them to be used to supply water from wells, where the distance from the pump to the bottom will obviously be small. Such pumps are equipped with a float switch to protect the pump from running without water, and are named with the letter "A".
Borehole pump Water jet can be located at a depth of up to 30 meters from the water surface, which allows them to be recommended for low-budget wells.
| Name | Power Tue |
Production, m3/h |
pressure, m |
Price, rub. |
Diameter |
|
| 460 | 3,3 | 35 | 6000 | 98 | ||
| 600 | 3,3 | 50 | 8090 | 98 | ||
| 900 | 3,3 | 75 | 10160 | 98 | ||
| 1100 | 3,3 | 90 | 12280 | 98 | ||
| 470 | 3,6 | 35 | 7050 | 98 | ||
|
Related Articles Latest Articles
Editor's Choice
|
What prayers should be read in the morning and evening
Hegumen Dionysius (Shlenov)
Temple of the Life-Giving Trinity on the Sparrow Hills of the Revelation of John the Theologian read adapted
The miracle of the prayer “Our Lady of the Virgin, rejoice The prayer of the mother of God is read 150 times
Can a husband and wife be godparents to a child Can a husband and wife become godparents