How to remove scratches from an induction cooker. How to remove scratches from glass ceramic hob

12.06.2019

They are popular: they have heat indicators, are easy to use, and easy to care for. But often because of strong mechanical damage or due to prolonged heating, defects such as cracks and scratches occur. The amount of damage can be different - from an inconspicuous crack to cracks that occupy the entire surface area.

Crack in the hob

Such defects are dangerous, namely:

lead to malfunction of the device;
the incandescent temperature rises;
the external data of the equipment is corrupted;
faults can increase, which will lead to the complete destruction of the glass-ceramic layer;
plate may miss electricity and hit the person.

Causes of damage to the hob

If faults were found on the hob, then this was preceded by the following factors:

A sharp, strong touch to the surface of any objects. For example, you can drop a heavy pot, which is a common cause of glass ceramic breakage. The fault will look like a hole in the center where the blow fell, and the branching of the cracks.
The stove was very hot due to the long operation of several burners that worked on full power. Usually the defect appears with a crash and can spread in different directions.
It happens when the stove was not installed correctly, and the powerful voltage supplied to the technique destroys the hob. The surface begins to crack from the central part, after which the defects diverge, having sharp corners.
Point damage, such as a dropped knife.
Tearing off dishes that have stuck. For example, a frying pan or pot has been placed on a sticky, uncleaned hob. When heated, the dishes are glued, and it is possible to tear them off only with a fragment of glass-ceramic.
Escaped jam and sugar syrup are very difficult to remove from the stove. The heated sugar, upon contact with the surface, penetrates into the structure of the glass-ceramic material. When cleaning the plate, the surface is damaged, chips appear.

Important! The last two reasons are caused by manufacturing defects and non-compliance with the rules when assembling the model. Common cases are when the surface is mounted very close to the edges, and during the heating process it bursts.

It should be remembered that faulty equipment powered by electricity is dangerous for any use. There are some rules where safety must be observed:

Any cooking on panels that have burst should be avoided;
Means for cleaning cooking surfaces must be specially designed;
It is not recommended to touch metal utensils with wet hands, there is a risk of electric shock;
Do-it-yourself repairs can lead to a short circuit.

What should I do if there is such a breakdown as cracks and scratches?

To get rid of such troubles as a large chip or crack, it will be more reliable to replace the hob with a new one. Leaving everything as it is is also an inappropriate option, because the integrity of the equipment is violated, and the chip can turn into a big break. Gluing the panel with your own hands is the most economical way. To do this, you need a material that will hold the strength of glass ceramics and will not allow cracks to spread further, will withstand high temperatures.

Step-by-step guide: how to self-glue a hob that has a crack or chip.

Tools and materials:

silicate adhesive.
Silicone.
Rectangular pieces of glass, approximately 4x9 cm.
Epoxy resin.
Rubber spatula.
Aluminum plate, the size is selected in accordance with the dimensions of the crack.

Work order:

Aluminum plate located under the chip

How to remove scratches from the surface of the plate

Appliances with a glass hob require special care. If you do not follow the rules for using the device, scratches may occur on the plate.

You can remove scratches from a plane in the following ways:

If more serious defects occur, it is better to contact a qualified craftsman. It is recommended to check the warranty period, if it has not expired yet, take a picture of the damage and call the service center:

You will need to call a home repair specialist to inspect and make a conclusion whether the surface can be restored.
If the warranty period has not yet expired, the surface must be taken for an examination, which will determine the cause of the destructive effect.
If the marriage turned out to be factory, the manufacturer is obliged to replace the glass-ceramic element or the entire stove.
When the warranty is no longer valid, you should visit a service center or repair shop.

Rules for the operation of glass ceramic hob include not only constant proper care and maintenance of cleanliness, but also the use of suitable utensils. Failure to comply with these rules can lead to defects that spoil its appearance. Even small scratches on a glass-ceramic hob are immediately noticeable, so if they occur, you should take immediate action.

Features of glass-ceramic stoves

One of the latest achievements in the field of household kitchen appliances steel electric stoves with a smooth glass surface and with burners marked on it. Glass-ceramic hobs are more expensive than conventional ones electric tiles, but their high cost is offset by lower energy costs during their operation. Savings are achieved due to the increased thermal conductivity of glass ceramics, due to which the burner heats up instantly, and the heat generated is quickly transferred to the pan.

In addition, glass-ceramic stoves have a number of advantages compared to conventional electric stoves:

Little inertia. The glass-ceramic surface quickly heats up and cools down just as quickly when the heating intensity changes, providing high control sensitivity.
High efficiency. Heat from the burners is practically not transferred in the horizontal direction, so all the energy is spent only on heating the dishes.
Flexibility of customization. In many models of stoves, it is possible to change the size and shape of the heating zone of the burner, which allows you to evenly heat various non-standard types of dishes. Automatic power reduction and shutdown modes may also be available.

Causes of damage

Glass-ceramic cooktops are strong enough to support the weight of heavy pots and pans. However, the utensils that were used for cooking on gas stove not suitable for these purposes. Using pans with a thick or uneven bottom, and aluminum cookware not only reduces the effectiveness of the glass ceramic hob, but can also cause noticeable marks on its surface. In addition, melted plastic and sugar can spoil the appearance of the product.

If stains and dirt can still be dealt with various means, then cracks and scratches can become a real problem. The appearance of scratches on a flat and smooth surface of the plate can be caused by:

Using cleaners containing abrasives.
Using metal scrapers, brushes and sharp objects to remove dirt (hard-bristled dishwashing sponges can also leave marks on a smooth surface).
Point impact (for example, when a metal cover or a sharp object falls on a glass-ceramic surface).
Contact with water or liquid food on a hot burner.
Putting a pot with a wet bottom on a hot burner.

Ways to remove scratches from glass ceramics

If cracks or deep scratches appear on the surface of the glass-ceramic plate, then you will not be able to get rid of them yourself. In this case, only specialists of the service center will be able to restore the original appearance of the product. Minor surface defects can be dealt with at home, but this will not be so easy. There are several ways to remove scratches from a ceramic plate, the choice of which depends on the nature and degree of damage.

Ceramic hobs are very comfortable. Compared to cast iron burners, ceramic hob retains more energy and requires less effort to clean up - at least in theory. After some time of use, stains, stains, grease and much more remain on any glass-ceramic stove. The situation is aggravated by the fact that for cleaning such a plate you need to choose a special tool.

The product industry offers a huge selection of cleaning products for glass-ceramic surfaces. However, their major drawback is their high cost. The good news is that you can just as well use regular household products! Here are 8 effective ways that will help restore your stove to its former beauty.

1. Tidy up while the stove is still warm

The first and easiest tip is to start cleaning immediately after cooking! It is best to clean the glass-ceramic surface while it is still warm. This will prevent small stains from turning into hardened and hard-to-remove stains.

All you need is glass cleaner and a soft cloth. A similar effect can be achieved by mixing about 200 gr. water, the same amount of white spirit (Stoddard's solvent) and 2 tsp. apple cider vinegar. Regular lemon juice (half a lemon may be enough) will help get rid of scale, which should then be gently wiped with a damp soft cloth.

2. Burnt spots (not old)

Chose a pot too small to cook pasta? Or did the neighbors ring the doorbell at the wrong time? Whatever is causing the food to "run away", burnt spots can be removed with the following trick.

You will need:

vinegar;
baking powder;
dishwashing liquid;
towel.

Spread vinegar evenly over the hob, sprinkle with baking powder on top (it will need much more than vinegar). Dip the towel in hot water with dishwashing liquid added to it and place a towel on a dirty glass-ceramic stove. You can leave the towel on for a few minutes or, if you have time, all night. At the end, remove the towel and simply wipe the hob with a soft, clean cloth.

3. Burnt spots (old)

If there are stains on the stove that do not want to be cleaned, use a little trick - pour just a little water on the surface. Usually the edges of the glass-ceramic stove are slightly raised - this will allow you to create a very thin layer of water. Heat the water and then leave it to cool. As soon as the water film has cooled, take a special scraper for glass ceramics and start cleaning old burnt spots.

4. Complete cleansing

For this method, you will need special tablets for dishwasher. They contain substances that can effectively cope with grease and stains even at low water temperatures. Dissolve one tablet in a bowl with a couple of drops of water. Spread the resulting paste evenly over the dirty glass-ceramic stove, leave for a couple of hours. To prevent the paste from drying out too much, you can put a damp soft rag on top of it. At the end, dirt is easily wiped off with a simple paper towel.

5. Steel wool (minimum fiber thickness)

Even with careful use of the hob, scratches can remain on the glass-ceramic surface, in which food crumbs and grease accumulate. If the scratches are small, you can buff them out with toothpaste and a cotton cloth. More effective solution is the use of special ultra-thin steel wool. It is just designed for polishing a glass-ceramic surface!

6. Changing the color of the plate

Over time, the beautiful black glass-ceramic surface tarnishes. There are many reasons for this: mainly scratches and notches left by the dishes. But also the stove can burn out over time. These types of stains can be removed with chemical mineral turpentine, gasoline or white spirit. Wipe off any visible stains with a cloth and your chosen product. However, make sure that liquid does not get on the plate contacts.

7. Pollution Prevention

It is much easier to prevent stains and dirt than to remove them later. Professional products for cleaning glass-ceramic surfaces contain glycerin, which facilitates further cleaning. But with the same success, you can use petroleum jelly or regular baby oil. After cleaning the surface, apply a very thin layer of petroleum jelly on the stove and rub it with a rag. This will give the glass-ceramic hob a shine and make future cleaning easier. The likelihood of severe contamination will be minimized.

8. Special occasions

Finally, here are two unpleasant examples of pollution that you can also deal with on your own. Sugar, heated on glass ceramics, instantly caramelizes. As a result, it hardens and tightly adheres to the surface. When you clean such contamination, you can accidentally scratch the stove. That's why you should always have a special scraper on hand, with which you need to remove the still liquid sugar as quickly as you can.

The same goes for melted plastic on a hot surface. If the plastic has hardened, turn the stove to the lowest temperature, melt it and quickly remove it with a scraper.

Use these easy 8 tips to keep your glass ceramic hob clean.

Progress does not stand still, and one of its manifestations for housewives is the emergence of a variety of household appliances, which, compared to the previous mass, have useful properties. For example, massive stoves have been replaced by hobs, which are light, comfortable and very ergonomic.

However, despite its advantages and attractive appearance, the question of cleanliness and bringing it into proper appearance remains open. No matter how careful you are in the process of preparing culinary masterpieces, drops of fat, fumes, boiled-off broths and other liquid dishes, as well as other stains will remain on the surface of the panel.

Of course, they need to be quickly wiped with a rag after cooling, but there are times when this cannot be done, so as a result we get ugly burnt spots and stains on our kitchen assistant.

Despite the traditional Russian tradition, before you start using the panel, carefully read the rules for its operation and maintenance! This will save you from unnecessary trouble, and it will allow you to serve you faithfully for many years.

Such glossy surface should be cleaned daily after use.

If you cooked carefully, without burnt food remnants, then you can simply wipe the surface with a damp cloth and wipe it dry without streaks.

For cooking, use only serviceable dishes with a flat bottom. During use, pots and pans develop cracks and dents, which can damage the panel and leave scratches on it during cooking.

Therefore, the purchase and installation of a glass-ceramic hob is an excellent reason to update the arsenal of kitchen utensils.

Moreover, lids for pots and pans must be selected strictly according to the diameter of the dishes. Otherwise, the resulting condensate will drip onto the panel. Even if it's just a normal scrambled egg, you'll have to wash the hob afterwards.

What absolutely can not be done when cleaning the hob?

Disregard the basic rules of household safety. In this case, it means that the panel should be washed only after it has completely cooled down, which will prevent you from getting burned.

In addition, it is worth washing the surface, only using gloves to protect the skin of the hands from the chemicals of detergents.

Do not clean the panel with metal wire sponges and coarse abrasive mixtures. Moreover, do not use knives, rough scrapers and other objects that scratch the surface.

This rule is important because various scratches and chips can worsen the condition of the surface, and this will already negatively affect the appearance of the plate.

What means and tools to use for cleaning?

Soft sponges, rags. They must be specially allocated for cleaning the hob. Always keep clean and dry. You can use microfiber cloths and melamine sponges. In order to quickly remove stains after washing, you can use rubberized cloths.
No matter how trite it may sound, but it makes sense to acquire special scrapers for similar surface. No other object, and even more so a knife, spoon or stick, will replace this tool in terms of efficiency. No need to invent, you just need to buy a plastic scraper in the store.
Special Fluids for removing stains and streaks from the glass-ceramic surface. They do not contain aggressive abrasive particles, contain substances that break down fat, soften plaque, and are easy to use. As a rule, such products must be applied to the surface for several minutes, then rinsed with water.

How to quickly and effectively clean the hob?

In order to clean the panel, you will need to follow certain sequence of actions.

To do this, you first need to properly wipe the surface and remove drops, light dirt and moisten the existing burnt residues of your dishes.
After that, the surface should be treated by special means and leave them to act for the time specified in the annotation to the remedy. Then rinse off the product.
Those remaining contaminants that the product could not cope with will have to be rubbed off manually. The best tool there will be a scraper for this, but they should not pick the surface fiercely. Holding it at a slight angle, the existing pollution is best washed with soft sliding movements.
After these manipulations, the surface should be wiped dry again with a cloth.

Folk remedies for removing stains from the surface of the glass-ceramic hob

In order to clean the surface, many experienced housewives use products that they prepare themselves.

Typically, these folk remedies includes acids - citric or acetic, a chemical dishwashing detergent, as well as a mild abrasive that is in any home - soda.

Vinegar and soda are used together and, while a violent reaction is taking place, is applied to the problem area. This allows you to break up hard dried stains and get rid of them easily.

And here citric acid, soda and dishwashing detergent are mixed to the consistency of a thick porridge and applied to the dirt.

Then, similarly to how specialized products are removed, they are washed off with a clean, damp cloth.

What means - folk or purchased in a store - to use to maintain cleanliness on your hob, you choose.

One way or another, if you are careful and considerate with respect to your glossy glass-ceramic hob, then it will invariably delight you not only with its direct purpose - cooking - but also with a beautiful appearance. After all, if you care about household appliances and its service life will be longer.

Removing scratches on glass is a problem that worries not only housewives or mothers with children, but also people who have cars. A few years ago, it was almost impossible to overcome them, but in our time there are many means to solve the problem. So why not use them to restore the aesthetic appearance of a damaged surface? Glass scratches are the most basic, but they often appear on glass hobs, glasses, mirrors, and also on car glass. You can solve any of these problems with the help of our tips from this article.

How to remove small scratches?

First, inspect the scratch. If you have concluded that it is small and shallow, then use the following tools:

Toothpaste

It will help to remove only very small and shallow lesions.

Take toothpaste.
Squeeze a small amount onto a clean polishing cloth.

Important! Take toothpaste only with a whitening effect and preferably if it is transparent.

Wipe.
Wipe off residue with a clean, damp cloth.
Repeat the procedure as needed.

Important! For large and deep lesions, this method is not suitable.

Ammonia

Ammonia is also able to smooth the surface and remove the defect, if it is small. To remove scratches on the glass with this tool, you succeed, follow the instructions below:

Mix water with ammonia in this ratio - 3 cups of water and 15 ml of ammonia.
Apply the solution to a tissue.
Rub in circular motions.
Remove leftovers.
Repeat if necessary.

How to remove deep scratches?

Deep scratches will have to be straightened more thoroughly and carefully. And the means in this case are somewhat different.

Special agent

Purchase a glass repair product.

Important! The seller needs to explain what kind of glass will be repaired - its color, thickness. Considering the proposed option, read the instructions on the package very carefully.

Attach the grinding disc to the drill.
Turn on the lowest speed on the drill.
Treat the scratch with a special nozzle on the drill and the purchased product.

Paste GOI

GOI paste is often used by restorers not only to remove scratches on glass, but even to restore expensive jewelry. If you have one of these, or you are ready to buy it, proceed as follows:

Crumble the paste into dust.
Take a cotton swab and type it so that the cotton wool is not visible.
Polish the damaged area for a while.
Wipe with clean cotton and repeat if necessary.

How to remove scratches from the hob?

Nowadays, often in the kitchen there are stoves with glass hobs that require special care. If the rules for using such plates are violated, scratches may appear on the surface. This problem is unpleasant, but solvable. To do this, use the methods below.

Important! Before you eliminate scratches on the glass, make sure that the plate is turned off and has already cooled down to avoid injury in the form of burns.

Soda and water:

Mix a small amount of baking soda and water to make a paste.

Important! If the mixture is dry, then it will lead to additional scratches.

Apply the prepared paste to a soft cloth.
Wipe in circular motions.
Remove the rest.
Polish dry with a dry cloth.

Metal Polishing Cream:

Buy the remedy in the store.
Apply it on a dry soft cloth or cotton pad.

Important! Before using the cream, first apply it to a small area and look at the reaction of the material.

Wipe the entire surface with small movements.
Remove the rest with a dry cloth.

Important! If scratches persist, use a soft-bristled brush.

When to seek professional help?

When some methods do not help or the situation worsens.
The scratch is too deep and wide initially.
This is a crack, break or other serious damage.
The glass thing is very valuable to you or very old.
Glass carries the load or is an integral part of a large structure. A scratch can indicate serious damage, so safety should be your number one priority.
If the suggested remedies suitable for home use do not help.