Crafts from plastic bottles (115 photos): we make original decorations with our own hands. For everyone and about everything How to make a car out of plastic bottles

Hello Dear friends, in this article I will show you how to make a do-it-yourself typewriter from plastic bottle. This machine does not need a lot of material and it is easy to manufacture. You can make such a homemade product in a couple of minutes of your free time. If you want to make this homemade product, then your children will be very happy with such a machine.

Necessary materials:
- plastic bottle 0.5l
- barbecue skewer
- covers
- glue gun
- motor
- switch
- battery

Step 1: First of all, we take a plastic bottle of 0.5 liters. It is better to take a square-shaped bottle. Using a marker on the bottle, draw the frame of the machine. Then we cut it out. Please note that in the back you need to make a stand for the motor.

Step 2: Next, take a barbecue skewer and cut off blanks 70 mm long. Then we install them on the frame and glue the wheels.

Step 3: Then solder the wires according to this scheme. I took a rechargeable battery. You can take a 9V battery.

Step 4: Install the nozzle for the motor into the cork. And insert the cork into the motor.

Step 5: Cut out the propeller from the bottle. The propeller should not be large, otherwise it will cling to the floor.

Step 6: Using a glue gun, glue the motor to the holder. And we twist the propeller onto the cork.

Many homeowners create all sorts of plastic bottle crafts to decorate their place of residence. You can create real works of art by spending a minimum of money.

Not only decor items are made of plastic, but even furniture. All you need is a knife, an awl and a little imagination.

In this article, we will analyze in detail how to make crafts from plastic bottles with your own hands.

We decorate the site

What kind of homemade products you will not see on household plots. There are flowers, animals, and trees. You can create beautiful sculptural compositions that will not only decorate the garden, but will also give a great mood.

Let's look at a couple of instructions for beginners that make it easy to create crafts from plastic bottles. It will be a palm tree and a pig.

bottle palm tree

To make a palm tree, you need to create a frame. Its length should be equal to the height of the tree.

Bottles of the same size are taken, the bottom is cut off from them and placed on top of each other. Then the leaves are cut out. They are attached to the top of the created structure. When everything is ready, the palm tree is painted green.

Funny pig from bottles

The piglet will look great anywhere in the garden. For its manufacture you will need:

• 5 l bottle;
• four bottle necks for making legs;
• one top of the bottle, which is cut in two to make the ears;
• tail wire;
• two beads for the eyes;
• glue;
• pink paint.

The parts are connected and fixed with glue. The finished product needs to be painted. You can take oil or spray paint. To prevent the pig from being blown away by the wind, you need to pour sand into it.

In addition to the decorative function, the design can serve as a flower bed. To do this, the top is cut off, filled with earth and flowers are planted.

Crafts from plastic bottles for the garden can serve as flower beds, borders or paths. To make a path, bottles are inserted into the ground with a neck.

Both whole and cut plastic are used. It is important to fill the bottles with earth so that they do not deform when they are walked on.

The use of bottles in the household

Bottles are used for more than just decoration. From them you can make a scoop, a washbasin or a trap for a pest.

Undoubtedly, everyone will need a container for storing any items. To make it, just cut off the neck.

The washbasin is also very easy to do with your own hands. The bottom of the bottle is cut off, and holes are made through which the rope is threaded. The structure is hung in the right place and water is poured. To wash, just unscrew the cork a little.

To make a trap, you need to cut the container in half. To catch insects, some kind of bait is placed at the bottom. For example, sugar syrup with yeast is suitable for this.

It will take hot water in which sugar and yeast dissolve. The cooled liquid must be poured into the trap. Not only flies and wasps, but also mosquitoes will flock to this delicacy.

Note!

Even a child can make a scoop. First you need to outline its shape, and then cut it out.

Can be made from plastic flower pots, greenhouses or containers for seedlings. A description of such crafts from plastic bottles can be found on the Internet at in large numbers, but to create something unique, you need to show your imagination.

It is fashionable to build an automatic watering tool from plastic containers. To do this, cut the bottle, make holes on the sides and put the hose into the neck. With the help of such a device, the plants will be perfectly moistened.

For plants that do not like surface watering, the following device is made. The bottom of the plastic container is not completely cut off. A trench is torn to the side of the plant, where stones are laid. The bottle is instilled upside down.

Then pour the right amount of water to carry out watering. You can place bottles upside down, but in this case you will need to make holes in the container.

Plastic containers are also used to heat plants. To do this, the bottles are filled warm water and put them around the plant.

Note!

For inspiration, see various photos crafts from plastic bottles. You do not need to make great efforts to make an original decoration or a useful thing for your garden that will last for many years.

Photo of crafts from plastic bottles

Note!

Plastic bottles are the ideal material for different kind crafts. They are free, there are a lot of them, you can just stamp whatever you want. Here in this video, the author made a children's model of a car that moves under the action of a motor and a propeller.

Necessary parts and blanks.

Plastic bottles

wooden sticks

Motor from CD or DVD drive

Cocktail tubes

Model creation process

We take a plastic bottle and cut off the upper part from it with a neck and a cork. From it we make a propeller with scissors. We heat it with a burner or a lighter and bend the blades. The propeller is ready.

Now we take a flat plastic bottle, cut off 2 pieces of tubes of the desired length and glue them to it using a heat gun. We make 2 car axles with wheels from corks and wooden sticks from sushi. We push them through the tubes on the body of the car model.

We disassemble the SD drive and remove the engine from it. We glue the propeller to the axis of the engine using hot glue. We glue the motor itself with the same glue to the top of the machine in its rear part.

Create with scissors and cardboard seat with a car seat. We insert the battery on the trunk, it will be pressed by a plastic ledge cut out of the bottle body and protruding from it.

The machine will rush, driven by the wind, accelerated by the propeller.

There is a more serious one in another article.

Very simple pvc bottle machine

In a simple model of a pvc machine, only parts from bottles are used - 4 corks and the container itself. Additionally, chopsticks for sushi and rolls are still used.

A plastic bottle car with a rubber motor

A car for a child can be made moving if you apply a couple of additional details - an elastic band, which is easy to adapt and you get a self-propelled vehicle for the baby.

One of the options for decorating a gift for a child ...

Like a long time ago did little boy a typewriter from a printer cartridge (!) And it turned out to be very durable, given the loads that the typewriter has in the sandbox. Well, to make something similar to a car out of a plastic bottle is simply necessary for every self-respecting do-it-yourselfer, especially since all the main parts of the car are present in the set of PET plastic bottles. The shape and size of containers made of PET plastic have many variations, which means that cars made from plastic bottles can be very diverse. And if you consider that in the vast majority of cases a plastic bottle is actually a container for food products, which can be filled with sweets, then such a machine will become a gift for a holiday or a family celebration.

Idea

The main thing in any car is the wheel, and the wheel must be available,. If there is a reliable wheel, then a durable toy car will be made. It would be natural to use a cap from a plastic bottle as a wheel, but the cap still needs to be somehow fixed on the axle so that there are no radial and end beatings during the rotation of the wheel.

This trouble can be avoided by using several specially selected plastic bottle caps (). The best results are obtained by using a conventional shortened cap ( outside diameter 30mm) and caps from milk plastic bottles (45mm). Both caps () have a height of about 10mm. The cap of a plastic bottle can withstand pressure of several tens of atmospheres from the inside of the bottle, it can not only protrude, but also.

Home distinctive feature The larger cap for the production of the wheel (green) has an annular inner collar (). Inner diameter ring bead is exactly equal to outside diameter smaller cap (blue). If you combine the caps with threaded parts towards each other and drill holes in each along the axis, you will get a reliable wheel for a future plastic car that can withstand radial and end runouts on the wheel axles of a future toy car made of plastic bottles.

Materials and tools

Work

The work on making a car - a gift from PET bottles should begin with the most important thing - the wheels, and the most important thing in our business is to make the wheels the same and symmetrical on each axis of the wheelbase.

During production, wheels should be carefully drilled exactly in the center all plastic caps (as in this case ()) selected to receive the wheels of the car - a gift, holes for installing the future wheel on the axle (). It is better to drill from the outside of the cap as, because the influx of plastic formed during such drilling will be hidden inside the resulting wheel, and the lock washers will fit snugly against the caps and minimize loosening of the wheel on the axle in different directions over time ().

When all the wheels are ready, we move on to building the wheelbase and installing the axles that carry the wheels. The “squareness” of the plastic bottle is just what is needed for the convenience of installing the wheel axes () in the same plane and minimizing the distance from the wheel to the surface of the plastic bottle as the body of the machine. The axis is traditionally installed through two side holes melted in the body with a burner, as in the case of such a product (). I do not advise drilling a plastic bottle mechanically, the hole is torn and quickly loosened.

Each wheel of two plastic caps is framed on both sides along the axis with metal washers (), and the end of the axle rod is melted on both sides like the head of a plastic rivet, which blocks the wheels from falling out. In principle, the main parts of the gift machine are already ready (), it remains only to strengthen the imitation and decorative elements, which primarily includes the cabin ().

The cabin is made from the bottom of the same plastic bottle as the body of the machine and is attached to the body closer to the wheels with 4 plastic rivets (), which are installed from the inside with such a device ().

Before installing the cab on its top, it is reasonable to install a “spare wheel” in the form of two plastic caps - the components of the wheel fixed on top with a through plastic rivet. Similarly, to push gifts inside the case, you can decorate with a lid of a different color () and a smaller size. Such decorations make the car look somewhat reminiscent of a Formula 1 car.