What water to fill the hill in winter. How to make a winter slide for children in the country

Downhill sledding, skiing and ice skating, building castles from snow - this is not all the entertainment that winter gives a child. If parents want to give their own child real pleasure from then they definitely need to learn how to do it. snow slide in the courtyard.

Snow slide: making a winter attraction

To build a snow slide, you only need a little ingenuity, a free flight of fantasy and a couple of improvised tools that are sure to be found in every home.

Instruments:

• metal or plastic shovel;
• scraper, construction spatula;
• spray;
• buckets and watering cans.

Usually, for the construction of a full-fledged snow slide, a small shovel is sufficient, which will help form the basis of the future structure, as well as several spatulas for leveling surfaces. A metal or plastic bucket and a pair of warm mittens will come in handy. However, depending on the complexity of the work, conditions and circumstances, you can use any other convenient at your own request.

Engineering and security

Figuring out how to make a slide out of snow is not at all difficult. However, before starting work, it is necessary to pay attention to some "secrets of engineering" that will help make the structure more durable, safe and durable.

1. First, you should choose the optimal location for placing a homemade attraction. Naturally, the longer the slope, the more fun it will be to ride.
2. In order to avoid problems with pouring and solidification of water, it is better to make the slope of the slide more gentle.
3. To protect children from injury, it is imperative to equip the roll-out onto a flat area, the plane of which will ensure uniform sliding to a complete stop.

How to make a slide out of snow: construction technology

Before proceeding with specific actions, it is necessary to protect yourself from frostbite by protecting your hands with tight ones and, if necessary, wearing warm gloves over them.

The optimal conditions for the construction of a snow slide come with the arrival of a thaw. As soon as the temperature approaches zero as much as possible, and the snow becomes more tenacious, it is necessary to roll up large balls, laying out the base of the future structure from them, according to the planned parameters and dimensions.

How to build a snow slide that will be comfortable and safe for a child? To do this, you need to take care of the preparation of the ladder, which will help you climb the hill without any problems. You can make an impromptu ladder from all the same snowballs laid in the form of steps. Smooth surface steps without problems is formed with a spatula or scraper.

Filling a snow slide is best done with the arrival of hard frosts. And you need to do this, evenly watering the surface of the slide warm water from a watering can. In this case, small depressions may occur, which will have to be slightly patched up with snow and leveled with a spatula.

Parents who know how to make a nursery ice slide right, never build it without borders. This allows you to increase the safety of the structure and leave the kids alone with entertainment, without fear for their health.

The secrets of creating a track

Having familiarized yourself with the basic recommendations on how to make a slide out of snow, you can proceed to study the technology for creating an ice track. First you need to carefully compact the snowballs, forming a smooth, dense surface of the future descent. You can compact the surface with your feet, a shovel, small log or by any other means at hand.

The angle of descent should be done, focusing on the age of the kids. For children under the age of 3 years, the angle of the inclined track should be no more than 30 degrees. Parents who want to learn how to make a snow slide for older children should be advised to make the slide steeper, otherwise the fun can quickly get boring for the kids.

Preparation of the base ice layer

The first layer of ice is the most important beginning when building a snow slide. Its correct formation becomes the key to creating ergonomically thought-out descents, verified inclinations and turns.

It is convenient to create a base ice layer using a regular home spray bottle for spraying plants. The water in the spray bottle should be warm. Otherwise, the slope will freeze too quickly, resulting in uneven sections. The first layer of ice crust should freeze for at least an hour.

How to make a hill of snow with your own hands? Filling with water

It is convenient to pour the main layer of water to form a full-fledged ice descent using a small bucket, or better than a regular one. The water in the container should, again, be warm, this will make the surface of the descent smoother. However, you need to try not to overdo it, because when pouring a slide, you can frankly put all your efforts in vain.

In order for the surface of the descent to be finally seized by a strong ice crust, children should not be allowed to descend until the next morning. For the final fixing of the surface, it is necessary to throw several buckets of water onto the slope of the structure early in the morning.

Eventually

How to make a snow slide for a child? When performing such a task, the main thing is to have a reserve of strength and time sufficient to form a full-fledged snow mountain.

In order not to fly off the hill, it is better to make the descent in the form of a groove with strong, high curbs. Similarly to the descent, the surface of the curbs must be evenly doused with water from a watering can, bucket or hose.

Having found out how to build a snow slide, you will probably want to make such a structure in the yard. If you also involve others in this process - parents and children, then you can turn the construction of the slide into a rather exciting event. As soon as the slide is completed, you can safely convene the neighboring children from all over the area, who will happily test the structure for strength.

Usually filling a small snow hill on your own, even without outside help, is no problem. Depending on the number of participants in the event, work can take from several hours to several days. However, the hard work will not go unnoticed. Until spring, children will be able to have fun and spend time in the company of their peers without leaving their own yard.

Winter brings not only cold, but also new entertainment and experiences. Sleigh rides, skiing and ice skating are available. In order to give joy to your children, and to have fun yourself, it is worth pouring a snow hill in the yard. Before you figure out how to properly fill a snow slide, you need to understand where it is best to organize it. The chosen place should be safe so that you can have fun and not worry about possible dangers. The selected area should be free of trees, shrubs, manholes, and other objects that could cause injury. There should be no road nearby.

How to fill a hill of snow with water - the dimensions of the hill, the angle of inclination

The height and width of the slide will depend on the free terrain, the amount of snow available, and your margin of opportunity. If the slide is made for crumbs, then you should not build too high a structure. Convenient indicators are a ratio of height to length of 1 to 4. In addition to the descent, you will need to roll out. This is a flat plane along which movement will be carried out until the rider stops completely. When creating a structure, do not make the descent excessively gentle or steep. At the beginning, the optimal angle of inclination is -30-50. Further, as you descend, reduce the angle of inclination, you need to do this as smoothly as possible.

How to build a hill

For the convenience of performing work, prepare large snow balls in advance. Lay out a wall from them, and fill the cavities between the balls with snow, use a shovel. Compact the resulting snow mass well. As a result, you can build a descent, railings and other elements. To make your slide convenient to use, do not forget about the steps. Optimal dimensions width - 40 cm. On the sides of the steps you can build low sides, it will be convenient to hold on to them when climbing the hill.

How to fill a hill with water

Once you've built the snow structure and tamped it down well, let it sit for a couple of days. During this time, the frame will be compressed and strengthened, which will allow it to be used until spring. It is better to fill it in the evening, when the sun sets and the temperature reaches -20C. If these conditions are not adhered to, the entire structure may “float”. Do not immediately pour water out of the bucket, first walk around the entire perimeter with a spray bottle. Wait a couple of hours and proceed to the main stage of pouring, do it slowly. Use a little warm water. If voids form, immediately fill them with snow. When the slide hardens well, walk down the slope with a sanding board - this will make it slippery and smooth.

Using the information provided, you can easily build the coolest entertainment for your children. Show your imagination, work carefully and the result of your work will certainly please not only children, but also adults. Ice fun from the snow in your yard is an opportunity to have fun for the whole family without leaving your yard.

1. Take care, first of all, that you have all the necessary items in stock. This includes shovels, watering cans and buckets. If you have all this in stock, then the next step is to find people who will agree to help you in this difficult matter. Here you can motivate people. We can say that this "attraction" will be able to please everyone in the yard, and not only children, but also adults will be able to ride on it. You'll see, after an hour of active search. You will find like-minded people.
2. The people have gathered, all the necessary items for organizing the labor process are available, which means you can proceed. First of all, collect a large pile of snow in one place. You can clean up the area and pour all the snow into a single place. So the benefit will be great, since you will help the janitors in this case, and will be able to collect a large pile of snow in order to create a slide.

3. Pack the piled snow very tightly. The height of the snow slide should be made such that it is convenient for both adults and children to ride on it. It is important that it is very convenient not only for children, but also for adults in this case. If the snow slide cannot be assembled, ask the person on the snowplow to help you. I think that he will not refuse you this pleasure.

4. After pouring a certain amount of snow on the hill, and then ramming it, level its future congress. It is important that it be as even as possible, so manually, or with a shovel, remove all irregularities visible to the eye. Do not forget to make a step for your slide. Otherwise, how are you going to get on it? Steps should be as flat and gentle as possible. This is very important if you want to keep your health and the health of others safe and sound.

5. Simultaneously with the alignment of the slide, seal its edges so that it does not crumble at the first contact with your hand. Along the edges of the descent, it is best to make a low board, which will not make it possible to move down the hill into wrong place. In this case, it will help prevent any kind of injury during the suspension and climbing the hill. Be careful!

6. After the slide is already formed, you can start pouring it! It is important that the sub-zero temperature is kept outside during the process of applying the final touch. It is best if you water it at night. Watering is best from a watering can or bucket. But it is better if you water the hill all the same from a watering can, because it is she who will give the hill a smooth descent and create an indelible impression of the process itself. Thus, flooding the hill at night, you will protect it from unauthorized persons. It is unlikely that anyone would think of climbing a hill in the dark, and even more so riding it. After all, your neighbors are far from stupid people.

Find out how you can make a snow slide yourself in winter, how to properly fill it with water so that it freezes.

Agree that in new year holidays one of the best, most memorable childhood memories is winter festivities. Making a snowman, sledding, skiing, and, of course, on a roller coaster is a wonderful activity. The latter will be discussed in this article.

You will learn how to build a slide without difficulties at home, without anyone's help from outside. This slide will bring great joy to your kids and even adults, and so that the work is not so boring, you can involve the whole family in it.

How to make a snow slide for children with your own hands?

It often happens that some problems occur during the construction of the slide. It collapses, disintegrates, pits, irregularities appear in the most inappropriate place. Next, you will learn how to make a slide correctly. So that it is durable, reliable, and most importantly - comfortable.

Materials for the construction of the slide

For a successful build you will need the following:

1. Frost outside the window
2. Lots of pure snow
3. Shovel
4. Broom
5. A fair amount of water
6. Watering can, ladle
7. positive attitude
8. Scraper or spatula

An example of building a slide for collective use

To blind a slide, you must follow a few simple rules:

Security. Select safe place location of the future structure. This is necessary so that your child is not injured during the descent, so that there are no trees, fences, roads, bushes and other obstacles on the way. You should not create an object of entertainment under the roofs of old houses, from which icicle, slate, brick, etc. can fall.

Hill height, angle of inclination. Determine the height of the future slide based on the age of the children. For very young children, somewhere up to three years old, a slide of one meter in height is enough. For older children, the most optimal, safe height is two to four meters. You should also adhere to the correct angle of inclination, such that it is not more than forty degrees.

pure snow. When building a slide, you need to use clean material. Since your child can smear things. Make sure the kids don't get hurt. The problem arises if there is debris, branches, sticks, etc. in the snow.

How to create an ice slide:

• After the location, size is determined, we get to work. With the help of shovels, you need to sketch the right amount of snow. For example, a meter slide can be built in about thirty minutes. It is advisable to make the foundation of your snow slide using rolled large balls of snow. Thus, you will already have the base of the slide.
• Next, we proceed to the formation of our slide. With the help of a spatula, a broom, we give it the desired shape. We make the optimal angle of inclination of the slide, straighten the area of ​​​​descent of the snow slide.

The base of the formed snow slide

• If the hill is high, make steps with a spatula (scraper), a shovel. For strength, strengthen the steps with your feet so that the snow settles, and only then form with an auxiliary tool. They should be comfortable, small, so that children can easily climb up.

Example of steps made of snow

IMPORTANT: Acceptable step width is at least twenty-nine centimeters.

Do not forget about the sides. Their height should be approximately ten to thirty centimeters, depending on the age of the child. The sides can be made with a shovel. Also, in order to give them a form, it is necessary to use manual work. During it, do not forget to wear gloves as protection from the cold.

If there is a desire, time, then add decor. Decorate the hill with snowmen, various figures, paint it with patterns. Or do everything to your liking, a lot depends on your imagination.

How to fill a hill of snow with water?

We have come to the most difficult final stage - to fill the ice slide with water. The descent of the slide must be poured in several stages - at least three times. Use cool water with a sprayer, watering can, ladle.

What needs to be done in order for the descent on the hill to be uniform?

You will need a broom, with which you spray an even layer of water over the entire surface of the structure. Make sure that there are no bumps, holes, bumps. To do this, during pouring, it is necessary to slap a seized thin, fragile layer of ice with a broom. After the second stage, you have a rough crust of ice. For a more reliable result, fill the slide for the third time, after which you will get a strong, smooth, and most importantly, reliable design.

IMPORTANT: It is worth pouring the finished structure at a low temperature, from 10 degrees below zero. Otherwise, your efforts will be completely useless.

Subject to the entire sequence of work, you will get an excellent snow slide, which your children will be very happy with. If the winter turns out to be frosty, then the subject of entertainment will stand until the spring thaw.

Video: Do-it-yourself snow slide

In our online store you can buy winter wooden slides - they are stronger, safer and more durable than snow slides. The slides offered by us have GOST certificates, a durable collapsible design and good protection from decay and dampness. And, unlike handicrafts, every detail wooden slide processed on all sides, the edges and edges are rounded, which eliminates the possibility of getting a splinter or injury.

So, after buying and assembling a winter slide, you need to turn it into an ice one, how to do it?

We put the slide in such a way that later we can extend the roll-out of the slide to the desired length. We cover the slope and sides of the hill with wet snow, connect the lower part of the slope of the hill with the ground, compact and leave to harden. At this time, we extend the roll-out - we compact the snow along the trajectory of movement and sculpt the sides from the snow. When everything freezes, we begin to fill the hill with water.

We are waiting for a significant sub-zero temperature, pour water into a liner with a sprayer and water the ramp, sides of the slide and roll out with water. The main thing here is not to keep the watering can for a long time in one place, so as not to wash away the snow and the previous layer of ice. When one layer hardens, fill in the next, and so on until the required density and thickness of ice is reached. And leave the ice to grow stronger overnight.

Please note that the steps cannot be flooded with water - to ensure safety, they must be clean, without snow.

In the morning we polish the ice. To do this, pour half a bucket hot water, pour snow there and stir until a homogeneous mushy mass. Then we take a plastic spatula and cover all the holes in the ice; we also take care of the ice during further operation. We make the final filling from the watering can and after the ice hardens - that's it, you can ride. After the children slide down the ice slide 10-15 times, the ice will be polished and become slippery. Happy winter to you!