Oil lamp - comfort and originality in one bottle. Oil lamp - comfort and originality in one bottle Do-it-yourself oil lamp

Every housewife dreams that the house was warm and cozy. But sometimes it is not easy to choose accessories to create the very necessary comfort. A special role in creating a competent interior is played by the choice of lighting. Today, there are many options for this: sconces, original chandeliers and plafonds. And for lovers of twilight and a romantic atmosphere, an oil lamp is perfect. Unlike all the options listed above, it serves more as an original decor element than as a lighting fixture. Although it all depends on the size and wick. Some of these lamps are quite bright.

What is an oil lamp?

A familiar name that immediately evokes a certain image in your head, isn't it? In fact, the oil lamp has not always been the way we used to imagine it. From the name it is clear that such a lamp works by burning fat or oil. The principle of its operation is similar to the device of a kerosene lamp - a container with fuel, a wick and physics, according to the laws of which, oil or fat always rises along the fibers.

About the use of lamps

The first oil lamps appeared in the Paleolithic era, only then they were made from clay, stones, copper, and later other metals. Such lamps were popular with the Eskimos, and until the 19th century, slightly modified, they were used as firing clocks (similar to sun clocks).

In Russia and Canada, the so-called kudliks are widely used - stone cups with a wick lowered into them and filled with fat, oil or lard. In some places they are still used, and the peoples of the north with the help of such lamps have learned to heat their homes.

Today, the oil lamp is no longer so popular, and it looks different: all kinds of candles, bottles, jars with decorations, and even original lamps in the form of ordinary lamps and spirals. And its functionality has changed - instead of lighting - decor.

Wick and oil for the right lamp

It does not matter whether you decide to buy a lamp or make it yourself, it is important to choose the right oil for an oil lamp, because the quality of the product and the brightness of the lighting depend on it.

Today you can find special lamp oil in the store. It can be of two types: on a vaseline basis (clean, transparent in appearance) and olive with impurities (more cloudy), and if necessary, even ordinary sunflower is used. But in order for the oil to rise and evaporate well, it is important that the wick for the oil lamp be of high quality.

DIY oil lamps

Any souvenirs self made have always been valued much higher than the factory and common to the masses. This also applies to oil lamps, which are not difficult to make with your own hands. Even if you haven't done it before hand made, you can easily cope, and your family and friends will be pleasantly surprised. For work you will need:

• oil container;
• wick or string;
• large needle or hook;
• support for the wick (wire, cap or cork).

Any container will do: it can be a beautiful small vase, a glass bottle, or even an ordinary jar. As a decoration, you can apply glitter, drawings, etc. to the outside with glue. In general, whatever comes to mind. In the meantime, the container dries up, proceed to the creation of the wick.

To do this, take a woolen cord or a special wick that can be bought in stores. If you are making a lamp in the shape of a bottle, it is better to use cork or a metal lid, and cork material is suitable for a vase, as it does not sink and almost does not burn. Using a needle or a crochet hook, thread it through the chosen base so that the cord sticks out 1.5-2 cm up, and the long end is no less than the distance to the bottom of your future lamp.

It remains only to fill the container with oil, fix the wick and let it soak for a while. Your gift is ready!

It often happens that the electricity is suddenly cut off, and there are no paraffin candles at hand. In this case, an oil lamp will be the best solution to the problem.

In order to make a lamp in oil, we need:
1. Old burned out light bulb (You can buy a new one).
2. A set of tools.
3. Cotton wick.
4. Steel wire.
5. Syringe.
6. Olive oil.

First you need to prepare a light bulb for further action. To do this, we need to make a hole in the base for wiring the wick. It is enough to hook the protruding contact of the lamp with pliers and pull it. After you have removed epoxy resin(black polymer around the contact) and everything that is inside the light bulb, you should get such a glass blank.

Next, measure the required length of the cotton wick. In order to check the wick for suitability, it is enough just to set it on fire. If it gives loose ash, then everything is in order. If it starts to turn into plastic, then such a wick will not suit us. So, we measure the wick so that it completely sinks to the bottom of the lamp and comes out of it by about a centimeter.

Now we fill our container with oil. For this I used a syringe. And pour the oil into the lamp. 10 ml. will be sufficient. If the oil runs out, it can always be topped up.

Now we take our wire and make such a device out of it with pliers. Circular area for attaching the wire to the thread of the lamp, and the top for fixing the wick. When assembled it looks like this.

An oil lamp is homemade lamp used by our distant ancestors. The basis for it are oil and wick. Of course, the need for such a lamp has now disappeared, but it will still serve you in the country or can become an interesting element of interior decoration, especially if you use aromatic oils. Make a miniature oil lamp not so difficult.

To make a miniature oil lamp, we need:

1. match
2. copper wire
3. thick wool thread
4. butter
5. tin cork

The thread will serve as a wick. The thicker it is, the better. Any thread absorbs any liquid quite easily, and the laws of physics lift this liquid up along the thread - this is what we will use. First you need to make the basis for the thread - the column on which it will be wound. To do this, take a match and wrap it with a tight ring of wire.

Gradually, winding the wire around the match in a spiral, we get the basis for the future wick.

When we wrap almost the entire match, we take it out of the spiral. Leave the tail below - it is needed for stability. Copper wire in the best way suitable for such manual creativity - it bends easily, and it is quite beautiful.

Now you need to wind the thread around this spiral.

From the bottom up, tightly wind the thread in a spiral, threading it a little between the rings of the spiral. From above we leave a small end of the thread, fluffing it along the fibers. If this structure is placed in a container with oil at the bottom, then the oil, having soaked the thread, will rise all the way up. That's what a tin cork is for. Drip a little oil into it and put a wick inside.

The oil itself does not burn, but the wick soaked in it burns very well. Of course, not every oil will do - you need to buy in the store what is intended for aromatic lamps and candles. All that's left is to set it on fire!

It is not necessary to use a cork - any metal container will do, into which you can pour a spoonful of oil and put the wick that we made.

keep looking at recycling ideas :) We recently looked at ideas for using baby food jars as chandelier shades and candle holders, and now let's see what else we can do with it available material. Happy viewing :)

You can use any jar with a lid for this, decorate it on the outside at your discretion and fill plain oil or even a mixture of oil and water.

And in order not to constantly suffer with a cotton wick, which must be pushed further during combustion, then it is better for you to use a fiberglass wick-cord. It does not burn, but conducts oil perfectly.

You can fill the glass container with different colored oils and with different densities, then you get a beautiful color of the jar.

Hole a metal jar with a nail, insert a wick and pour oil into the jar. Your oil candlestick is ready!

And we can even adapt a light bulb for this option.

And here is the idea of ​​an aroma lamp for you :))

Based on materials from the siteputitinajar.com/crafts/mason_jar_oil_lamp/

And this is generally aerobatics :)) Beautiful sandstone or dolomite is drilled with a drill in several places, wicks are inserted, which are lowered from below into a container with oil.

Wrong side.

I hope this idea will come in handy for you to implement and use these jars for decoration in various techniques. You can decoupage, you can paint with stained glass paints, you can apply paper art, dot painting, glue all kinds of floral material, glass fragments, you can apply a mosaic or just tint through a stencil, the main thing is that the decor does not light up, since after all we are dealing with fire. After all, the oil from the wick seeps a little and drains. Good luck with your experiments!

Let me remind you of the previous post about the use of jars :)

The oil lamp or candle is one of mankind's oldest forms of light sources. According to Wikipedia, there are stone oil lamps that were used from 10,000 to 15,000 years ago! Today we'll talk about how oil lamps work, what type of oil and wick to use, and how to make a beautiful oil lamp out of a jar in just a few minutes!

Three reasons to fall in love with oil lamps:

1. The lamp in the jar is easy to make but so attractive. It only takes two minutes and a little vegetable oil and water!
2. Such a lamp is safer than candles. If the oil lamp is turned over, the flame is immediately extinguished by the oil and water. However, do not leave the lamp unattended!
3. Bright long burning. One tablespoon of oil can burn for two hours!

These oil lamps can be an inexpensive source of light, but they are also great for decorating a dinner party or party!

How do oil lamps work?

The earliest oil lamps used vegetable oil as fuel, while later versions used kerosene or lamp oil to impregnate the capillary wick. This version is made with vegetable oil.

What type of oil and wick should I use?

Lamps that use kerosene or lamp oil have specially made wicks. Long cotton wicks are not suitable for vegetable oil lamps because vegetable oils are highly viscous.

Long wicks simply don't pick up enough oil and go out. Floating wicks work great with all vegetable oils!

Materials:

• large floating wicks
• 1 tablespoon vegetable oil
• jar or glass bottle
• decorative elements (flowers, pine cones, pebbles, etc.)
• herbs, spices or essential oils

Step-by-step instruction:

Step 1: Gather glass bottles and jars, fill them with flowers or other decorative elements. Fill with water.

Step 2: Pour some vegetable oil on top until the oil forms a layer about half a centimeter thick.

Large floating wicks are supplied with discs and small waxed wicks. Insert a piece of wick through the center hole in the disc and place it over the oil layer.

Now light your oil candle and enjoy the beautiful light!

Flowers and fruits will last a whole week in water.

Pine cones, pebbles, beads are also great additions! Red viburnum berries, cranberries and softwood paws are great for decoration.

To extinguish the flame, simply cover the candle with the lid of the jar. Floating wicks can be left inside.

After repeated use, the waxed wick will burn out, just replace it with a small piece of pre-waxed wick that can be cut into small pieces. A floating disk can run for a very long time.

Some flowers will pop up, but you can keep them down with other decorative pieces.

Add food coloring to water for a special effect!

Olive and sunflower oil burn cleanly, no smoke.

Artificial plants can also be used for decoration, just keep them safe from flames.

The article was prepared based on www.apieceofrainbow.com.