Do-it-yourself kite (kite). Making a kite from paper: drawings with dimensions How to make a kite diagram

23.10.2023

A basic DIY kite consists of three slats glued to a sheet of thick material. A tail with a small weight is attached to the end, serving as a rudder. It is important to place the center of gravity in the middle of the body, then the structure can rise into the air. The lighter the kite load, the higher the takeoff will occur. It is necessary to take into account the fact that as the lift of the kite increases, the thrust from the ground increases. The supporting structure is subjected to air pressure, so the material for manufacturing must be strong and rigid.

What is a kite

Initially, such aircraft were made in China in the shape of a dragon - not a single traditional ceremony was complete without this symbol in the sky. And although the manufacture of structures has long gone beyond the borders of China, the name has stuck. Various models of flying devices can be with a base, frameless, flat or multi-plane design. The finished apparatus is held in place by a long rope called a handrail. The aerodynamic shape promotes stability, and the strong thread helps keep the kite at the desired airflow angle.

Design

The design of a simple kite, from a flying frame with a tensioned covering, can be assembled at home. It won't gain much height, but it will be a good start for gaining initial construction skills. There is a single principle at work here, based on the aerodynamic and physical properties of objects. Slings are attached to the corners of the body and combined into a bridle for stable control. Each model is decorated and stabilized by a tail. Maneuverability will be improved by additional cargo or multiple tails.

Operating principle

The main condition for a high launch is wind speed (3-4 m/s). It is recommended to launch the finished model in an open area where there are no trees or wires. A well-made structure will be lifted by the air masses themselves. You need to stand against the wind, releasing the rope 10-20 meters. In light winds, you can run to catch the moment when to send the flying device into the air. It is better to cope with this task together. The smoothness of the flight depends on how correctly the tail and the length of the lines are adjusted to the size of the structure.

Species

There are a large number of models to choose from: flat, voluminous, curved, frameless, triangular or consisting of several links. The latter differ from a flat kite in their high structural stability. Multi-cell form, with a large number of individual links, connected in the form of polyhedra. A group of interconnected flying devices looks impressive in the sky. The width of such a product is suitable for attaching a small camera to it for aerial photography from a height.

How to make a kite with your own hands

To make a flying kite at home, you need to choose a model that determines the shape of the frame and the surface material. Determine the number of support rails that support the canvas in tension . Sheets of paper, fabric, plastic bags, and cardboard are used as canvas. The slings can be secured in one or two places on the base. Good aerodynamic force can be imparted to both uncontrolled (single-line) and controlled (multi-line) models. The thread winding spool will eliminate tangling during startup.

From paper

You can make a kite out of paper as follows:

Fold a square out of thick paper.
Label the axis of symmetry.
Fold the sides in half.
Fold the corners to form an accordion.
Pass a long thread through the center of the accordion.
Attach the adjustment rail.
Connect a bundle of threads prepared in advance.
Decorate the free end of the ponytail with bows or rags.
Pull the tail through the hole and secure it securely with a rope.

From fabric

Develop an original pattern to make a flying kite toy from wire using fabric:

Wrap a piece of flexible wire with threads and secure them at the ends.
Shape the wire into the desired shape.
Trace a piece of fabric along the contour of the frame, leaving an allowance of one and a half centimeters.
Glue the fabric to the wire blank.
Decorate the surface.
Tie the rope in several places.
Bring the ends of the ropes to one point, retreating 30 centimeters from the kite, and secure them together.
Tie the rope.

Made from polyethylene

DIY kite made of polyethylene:

Prepare two planks, one being twice as long as the other.
Fold them, moving away from the top of the long bar.
Secure the connection point with tape.
Wrap the strips with tape and make small cuts.
Pull a strong thread through the cuts and secure it.
Trace the outline of the finished frame on polyethylene, adding one centimeter.
Cut out and tape the edges.
Tie a 30 cm long thread onto a short stick.
Tie a piece of fishing line to the top of a long stick.
Connect all three ends of the fishing line to each other and secure the thread of the lower corners, by which you will hold the kite, with tape.
Decorate the product with ribbons.

Dragon Kite

A large design, with contours resembling a dragon, is performed as follows:

Select materials for the frame and covering.
Make a support base for the desired shape of the flying dragon.
Secure the connected structures with thin rope.
Make a drawing of the model on paper, use it as a template.
Cut out the outline of the kite for the airfoil.
Decorate the surface with homemade designs or stickers.
Attach the outer trim to the frame.
Attach the slings, tie the rail.

Box kite

The box kite is a multi-plane kite. It's done like this:

Make 4 long wooden slats and 6 half-short wooden slats.
Secure the short ones crosswise with a self-tapping screw.
Attach the long slats to the small ones in the center and ends.
Tie the larger sides at the corners with wire or rope in a crisscross pattern.
Wind the rope around the slats, secure it with tape in the shape of a rectangular parallelepiped of the frame.
Attach the plastic strips to the slats, making a complete rotation around the object.
Stretch a rope over the cellophane covering around the perimeter of the square and glue it tightly to the surface.
Make loops of wire for tying the line.

Diamond Kite

You can assemble a kite with your own hands so that the design has improved aerodynamic characteristics. The description will help you:

Make 6 long wooden slats and 4 slats half as long.
Make small crosses.
Cover the sides with wire and secure.
Attach long slats to the sides of the crosspieces.
Coat the wooden slats with drying oil.
Tape the frame around each cross piece.
Align the frame perpendicular to the position of the slats in the crosses.
Cover the body of the kite with two layers of tape, being careful not to damage the shape.
Tie a strong thread to each rail and secure with a strip of tape.
Attach the fishing line to the wide side of the diamond at both ends of the batten.

Video:

Guys, we put our soul into the site. Thank you for that
that you are discovering this beauty. Thanks for the inspiration and goosebumps.
Join us on Facebook And In contact with

Probably each of us has at least once launched a kite into the sky. Remember how great it was! And it’s even more interesting to build it yourself.

We are in website also couldn’t resist such an idea and made snake. Our photographer took photos of the main moments, so this task will not be difficult for you to cope with. By the way, the kite flies wonderfully!

You will need:

Standard size plastic bag
Thin and flexible sticks
Several meters of strong rope
Scissors
Scotch

How to make a kite

First, fold the bag in half vertically. Make sure it is flat and level.

Cut the bag as shown in picture 3. You should end up with 2 pentagons.

Take 2 sticks. One is the height of the snake, and the other should be slightly longer than its width.

Tape first the vertical and then the horizontal stick. In this case, the horizontal stick needs to be slightly bent towards the “nose” of the kite. Glue the sticks together at the point where they intersect.

Cut the remaining pieces of the bag into strips and tie them together. This will be the tail of the snake. Attach it with tape to the place marked with the red dot on photo 7.

Using a sharp object, make 4 holes in the places marked with red dots on picture 9. Cut a piece of twine and tie it in two knots at the top and bottom of the kite, threading it through the holes. You've got a bridle.

Take a main string that is at least 6 meters long and first tie it to the bridle so that it runs freely between the red dots on the photo 11. Then you need to find a place on the bridle where the twine will be fixed. It is better to do this outside in a windy place. As you try to fly the kite by hand, gradually move the string along the bridle. At some point the angle of inclination will be correct and the kite will “catch” the wind. At this point, tighten the knot tighter.

Let the kite fly - just throw it up and pull the rope as if you were catching a fish. Release the string little by little. Run a little - this will make it easier for the kite to take off.

Marina Suzdaleva

Summer time has come. Children are spending more and more time outside. And although there are many interesting ideas, what to do with a child in the summer, creating with your own hands and then flying a kite can become the most vivid and memorable event for the whole family. The participants of “” were convinced of this from their own experience and share their ideas and impressions with us. A large gallery of kites of various shapes and colors will surely inspire you to create your own conqueror of the air!

We decided to make a kite. We found some simple instructions on the Internet and started making them.
We acted like this:

My daughter actively participated in the process and helped: she attached the sticks together, taped the packaging, and made bows. As it turns out, it's not difficult at all. And how much delight, squealing and laughter there was when flying the kite! Such emotions of a child are definitely worth the effort and time spent.

Gudimova Olga and daughter Varvara, 5 years old.

Kite "Monk"

She suggested that her husband make a kite with his daughter. As a result, he got carried away and began to work on his own, so in the meantime my daughter and I decided to make our own kite. This activity was new to me, so the choice fell on the simplest “Monk” model.

Materials and tools: thread, A3 sheet of thick paper, scissors, PVA glue.

Manufacturing process:

Cut out a square from a sheet of paper.
Carefully bend the edges along the axis as shown in the diagram. Fold down the corners of the paper. The angle may be slightly smaller than in the diagrams - whatever is more convenient for you.
We bend the edge of the bent corner again so that we get something like an accordion or spring.
We make a “bridle” - cut a piece of thread about 30 cm long and glue it into the resulting paper pockets.

Here my daughter decided to color our snake :)

While the snake is drying, prepare its tail. This is important, the kite will not fly without a balancer. For the tail, I used several pieces of wool thread about 50 cm long. We put them together and tie them into a tassel closer to the end of the tail. Cut out a triangle from waste paper and glue the tail. We tie a skein of regular thread to the bridle. The snake is ready.

The launch of our “firstborn” was successful. The kite did not fly high, but confidently!

Kudryashova Nadezhda and Anya 4.7 years old, St. Petersburg.

Red snake

Vladik made the kite together with his dad. For the base of the kite, 2 balloon sticks were taken. They were fastened perpendicular to each other. Then a nylon thread was pulled around the perimeter.

Next, a quadrilateral was cut out of paper with additions for the hem. The edges were folded and glued to the thread around the perimeter. A nylon thread was pulled from the three upper corners of the kite to the center and secured.

To control the kite, one end of a thread was tied to the resulting center, and the other end was wound on a homemade spool from a toilet paper roll.

Finishing touches: the snake was painted and its tail was made from thread with strips of wrapping paper tied to it. The snake is ready!

Lidia Maloletkova and son Vlad, 6 years old.

They started making a kite as soon as they received the task in the Ecological Expedition. Moreover, it turned out to be two kites, because There are two children and one common option is not yet available. I took a diagram of the simplest kite from the Internet; it turned out to be the “Monk” kite.

I took thick paper, folded it according to the pattern, and the children began to color. Vanya depicted it with blown felt-tip pens (we had a stencil), Nastya tried to blow it out, but she thought it was too long a process, and then she simply painted over the stencil, and I traced the outline.

After the design work, I glued the ends of the thread into the wings of the kite with Moment glue. I used a strong thread. And woolen threads went to the tail.

They launched it at the dacha, but by that time the second kite had disappeared somewhere, so only one flew... So much delight! Thanks for the idea!

Ekaterina Adnodvortseva and children Vanya 4 years old. 8 months and Nastya 3 years old. 3 months, Moscow.

Daniel and dad made a kite. The process was simple. Found a description on the Internet. We sawed off two sticks of the required size, fastened them perpendicularly with electrical tape and stretched a fishing line around the perimeter.

We had a very large ball, dad cut a suitable piece out of it. We connected the sticks and this piece, also using electrical tape. We attached fishing line to the top three corners and tied everything together. A fishing line on a reel was tied to the resulting center. The tail was made from strips of fabric. There was a lot of joy. Tomorrow dad is at home, they will launch it.

Lyudmila Shatalova and grandson Daniel, 5 years 2 months. with dad, Israel.

They made it into a friendly group of three girlfriends. It’s so joyful for my daughter when we not only work with her together, but also with her friends. She herself tells me: “Mom, let’s make a snake when Polina comes to us!” This is very important for children - to do it together, to be able to negotiate during the work process, to give in somewhere...

Then they merrily flew kites onto the stadium field: squealing, delight, running around! And other children looked at us with interest!

It is very interesting for us to participate in the Ecological Expedition. But the process sometimes remains behind the scenes. We were so busy making kites that I forgot to take a photo. Yana is at the table after a walk, and on the table is her snake and the remains of a tail (she later made a toy out of them for the cat).

Larisa Fedotova and daughter Yana, 6.6 years old, Barnaul, Altai Territory.

We made a kite from cardboard paper and ordinary threads. Ilya often makes something himself, some boxes with secrets, recently he made a multi-colored cocked hat. I am always pleased with such children's creativity. The most interesting thing is that I didn’t tell Ilyusha that I wanted to make a kite with him. I come home from work, and he started making a kite. Our wishes coincided in an amazing way.

Tired of boring walks?

My son Ilyusha and I made a kite yesterday; it didn’t fly fully, but it was still fun to run around with it. And in the evening I bought a ready-made kite, let's try to fly it.

Ksenia Gladilina and son Ilya, 7 years old, Dolgoprudny

Kite "Penguin"

Creation and launch process:

Roman Batalov, 8 years old, Kirov

We made the kite from improvised materials: to make the frame we used a bamboo mat on which we stretched a piece of plastic bag cut in the shape of a rhombus. The tail is also made from a bag.

Our kite was only able to fly to a low altitude (there was no suitable wind), but the children had fun - they ran after it like kittens after a bow! We will also try to fly the kite in windy weather.

Anastasia Zotova and sons Grisha, 4 years old, and Andrey, 1 year old. 3 months, Vladivostok.

This is a very simple model, but it is important to us that our son assembled it himself inside and out.

Timofey: “An amazing snake made from drawing paper and my mother’s threads. It flies well in windy weather, but in zigzags. That's why I named him Zig Zigus."

Timofey Vernyaev 7.5 years old, Meget village, Irkutsk region.

On the Internet I found the easiest way to make a kite. For several days I asked our dad to find us a couple of slats. As a result, after a couple of days, dad planed 5 slats for us))) The whole family participated in the process of creating the kite! Everyone was so interested in this...

To create the kite, only two slats were needed, but there was no time to waste, so dad sat down to make another kite, and from the remaining slats, the eldest daughter decided to “cook up” another one.

If we describe the creation process itself, then:

We cut the sticks - long 60 cm, short - 35 cm, folded them perpendicularly and secured the cross with tape.
The ends of the sticks were wrapped with tape and cuts a centimeter deep were made in them.
The fishing line was pulled through these cuts, creating the contours of the kite.
We placed the frame of the future kite on polyethylene (I took a regular bag and cut it, my husband took transparent polyethylene). We outlined the kite with a marker, adding 1.5 cm on each side to the hem, and cut it out along the contour, folded the edges of the film inward around the fishing line and secured them with tape. The “body” of the snake is ready.
Then they made a bridle and tied it to a long fishing line. Made a tail.

At this point, the process of parents working with children ended and the creative process of children began. They drew flowers, some patterns and put a clown and a bear on a kite so that they could fly (added stickers).

Making a paper kite is easier and faster than you might think. All you need is one sheet of paper and a few extra materials you probably already have at home. The best thing about flying a kite is that you get an unforgettable experience and enjoy outdoor activities. The kite projects proposed in this article are quite interesting and are perfect for children of any age.

Steps

Making a fast Schaeffer kite (or bumblebee kite)

Gather all the necessary materials. It is best to immediately place all the necessary materials on the table or on the work surface on which you are going to make the kite. Below is a list of what you will need to get started:

a sheet of A4 paper (printer paper or construction paper);
light thread;
pencil;
stapler;
ruler;
scissors;
hole punch (optional);
pleasant breeze or light wind (speed 2.5–6.5 m/s).

Start creating your kite. Place a piece of paper in front of you vertically so that its long sides are on the left and right. Then fold the paper in half so that the fold itself is at the bottom.

Mark the wings of the kite. Take a pencil and make a dot right on the fold of the paper, about 5 cm from the left edge. Next, using the same pencil, place another dot on the fold of the paper approximately 5 cm from the first dot. The thread will then be attached to this place.

Fix the kite's wings. Fold the top left corner of the paper to the first point. Don't miss the fold. Do the same with the bottom layer of paper so that both halves of the kite are symmetrical. Secure the corners of the paper brought together with a stapler (the staple should be where you marked the first point with a pencil).

Cover with tape the place where the thread is attached, where the second point is located, and make sure that the piece of tape you take is enough to cover both sides of the fastener. Using a hole punch, make a hole in the snake directly above the pencil mark. This hole is for attaching thread.
- If you don't have a hole punch, you can carefully poke the hole with scissors.
- The purpose of the tape is to strengthen the paper in the area of the hole so that it does not tear later.
Attach the string to the kite. Thread the thread through the hole in the kite and tie it carefully with a secure knot. If you are in a particularly good mood for creating crafts, you can additionally make yourself a handle for the kite from a thick stick or tube to which you tie the other end of the thread. With such a handle it will be easier for you to attract or release the kite; in addition, it will prevent you from accidentally missing it.
- The thread used to fly a kite is also called a lifeline.
Mark the location of the kite's wings. Using a pencil, place a mark along the top edge of the paper approximately 4-5 cm from the fold, depending on the desired size of the kite's wings. Place another dot along the bottom edge of the paper about 4-5 cm from the right side. Visualize or draw a line connecting two points.
- Delta-shaped kites were first invented by Wilbur Green in the 1940s, specially designing their wings so that they would fly well in light winds.
Assemble and secure the wings. Fold the paper (its top layer) along an imaginary or drawn line. Turn the kite over and fold the other side in the same way. Make sure that both sides of the kite are perfectly symmetrical. Using tape, attach the folded sides along the fold line. Your kite is now starting to take shape.

Strengthen the kite frame. Place a thin wooden or bamboo stick horizontally across the widest part of the kite's wings (across its longitudinal axis). This part of the kite is also called the sail. Secure the stick in the desired place with tape. Make sure that the stick does not protrude beyond the edges of the kite. Otherwise, carefully trim it with scissors.
Prepare the place where the thread will be attached. Place a mark on the longitudinal ridge of the kite, about one-third from its nose and about 2.5 cm from the fold of the paper. Cover this area with tape. In this case, a piece of tape should be large enough to cover the place where the thread is attached on both sides of the kite. Take a hole punch and punch a hole at the mark you placed. The thread will be attached to the hole.
- Note that the hole should be located in the narrower part of the snake's spine, which is its nose.
- If you don't have a hole punch, you can carefully poke the hole with scissors.
- The tape is necessary to strengthen the hole so that it does not tear later.
Tie the thread. Thread the thread into the hole you made and carefully tie it with a secure knot. You can additionally make yourself a handle for the kite from a thick stick or tube to which you tie the second end of the thread. With such a handle, it will be easier for you to attract or release the kite, and it will also prevent you from accidentally losing it.
- The thread for launching a kite is also called a lifeline.

It's not just children who love flying a kite. For adults, a fun hobby allows them to return to a carefree time for a short time and feel the joy of flying. You can buy a finished product, but it is much more interesting to make a kite on a string with your own hands. Using available materials and drawings you can easily cope with this task.

Types of kites you can make yourself

In order to make a kite with your own hands, you need 5 things: basic labor skills, materials, drawings, desire and patience. All structures are made according to the same principle: a base with aerodynamic properties of different shapes and a rope. The kite can be flat and voluminous, simple or consisting of several links.

Such a thing can be found in a store, but it will be a standard replicated version. It’s better to make a controlled kite yourself, and then fly it and enjoy the result.

The first who came up with the idea of launching a structure in the form of a kite or dragon into the sky were the Chinese. They took up this fascinating business in the 5th century BC.

Flat kite made of paper, nylon or polyethylene

Together with your children, you can make a simple version of a homemade kite called “Monk”.

Take a sheet of thick paper of any color, A4 format. Place the lower right corner to the long left side so that it aligns with the short one. It turns out to be a triangle with an upper single part. Cut it off, unfold the sheet, you get a square.
Mentally or with a pencil, draw a straight line between two opposite corners of the square - mark its axis.
Bend the piece of paper so that the right and left sides of the square “lie” on its axis.
Bend the corners twice upward according to the accordion principle.
Glue a thread 30 cm long into the middle of the accordion on both sides. The result is a “bridle”.
Tie a rope strictly in the center of the bridle to launch and control the kite.

It is impossible to control a snake without a tail, so do not forget to make a rope from ribbons or threads intertwined and tied at the bottom with a tassel.

Make 20 pieces of regular thread or 5-6 of wool. Their length for a small kite should be at least 50 cm.
Place the cut pieces together and tie them with a tassel towards the end or braid them. You can decorate the tail with bows or paper triangles.
Make a hole in the bottom corner of the kite, thread the tail through it and tie it in a knot or glue it.
If you are using ribbons or strips of fabric instead of thread, thread them through the hole, fold them over, and hem the top to the bottom.

In addition to their decorative and entertainment functions, the first kites in China were used in construction. With their help, ropes were thrown across reservoirs and ravines for the subsequent construction of bridges.

Homemade kite in 5 minutes - video

Paper, fabric and wood construction

Compared to the “Monk”, there are some complications in the manufacture of this kite. In addition to paper, you will need thin wooden slats and fabric.

To make such a kite, prepare in advance:

2 notebook sheets;
3 slats (2 60 cm long, 1 – 40 cm);
durable nylon thread;
colored fabric.

Instructions for creating a flat “Russian” kite with your own hands - video

Diagram of a triangular kite made of polyethylene

The triangle kite is another type of flat design that is more difficult to manufacture. But the result of your work will definitely please you. The snake has a classic triangular shape, bright and very beautiful.

Materials you will need:

plastic bag, better bright and dense;
slats (straight sticks made of bamboo, willow, linden, pine or just window beads);
rope or fishing line with a reel.

The dimensions of the finished product depend on the dimensions of the package and the height of the launcher. Use percentage notation as shown in the diagram. Decide which number is taken as 100%, and then use a calculator to calculate the specific values.

For accurate marking, substitute your values and calculate the parameters of the kite in centimeters

Cut out the “body” of the kite from the bag according to the drawing.
Prepare 4 slats of appropriate sizes: two side slats of the same size, one long longitudinal and one short transverse.
Secure with any glue first the side slats on the sides, then the longitudinal one in the middle, and finally the central transverse one.
Attach a keel in the middle of the kite using tape.
In the center of the lower part of the canvas, cut a hole into which to thread a tail made from scraps of bags.
Tie one fishing line to each corner and fasten them together with a knot.
Attach a fishing line with a reel to the resulting “bridle” for launching and control.

Interesting fact. In ancient times, kites were used for military purposes: for reconnaissance, sending messages or gunpowder into enemy territory.

Drawing of a diamond-shaped product

This design is made according to the same principle as a triangular kite. You will need 2 slats (60 and 30 cm), a plastic bag, fishing line and tape.

Fold the slats in a cross so that the short one intersects the long one at the height of one quarter of the total length.
Tie them together with tape or rope.
Place the resulting cross on a plastic bag.
We measure the required size and shape of the future kite
Cut the fabric into a diamond shape, leaving a small margin.
Pull it over the slatted cross, tuck the stock and glue or hem it.
We wrap the kite crosspiece with a bag and cut it off
Tie a fishing line to the intersection of the sticks and to the lower corner of the diamond. Just in case, give it a few turns and secure it well.
We tie the fishing line to the intersection of the sticks
Tie the fishing lines together with a knot to which attach the fishing line and reel. It turns out to be a bridle.
Attach a tail, also cut from cellophane, to the end of the axial stick with tape.

In order for a kite to fly well, its tail must be 10 times longer than its base.

Interesting fact. In the 13th - 14th centuries, aerial structures were used to study natural phenomena and observe the weather.

You can also use the diagram to make a kite.

Making your own diamond-shaped kite - video

How to make a bird-shaped design

To get a kite that resembles a bird in flight, use one trick: secure the string between the side parts. Under the pressure of the wind it will either stretch or weaken, making the structure “winged”.

Necessary materials:

8 sticks with a diameter of less than 1 cm and a length of 30.5 cm, 3 sticks of 91.5 cm and 3 of 150 cm from linden or pine;
nylon or polyethylene film;
fishing line;
coil.

Place 150 cm long rods parallel to each other in front of you.
Place a 91.5 cm stick across, 59.75 cm from the edge.
Tie it with threads so that there is a distance of 30.5 cm between the first and second, and 61 cm between the second and third.
Stepping back 30.5 cm to the larger side, apply a second stick 91.5 cm long.
Tie 4 short slats at a distance of 30.5 cm from each other at an angle so that at the bottom they converge into a triangle (see diagram).
Cover the closed ends of the short slats with the last 91.5 cm long slats. The result is a “manger” tied in the center of the structure.
Tie everything together with threads coated with glue.
Fasten the ends of long sticks that have been previously soaked in water. You need to wet them so that they do not break when bent.
Stretch a fishing line between the ends of the “wings”.
To make the “body” of the kite, cut out a pentagon from fabric (top and bottom sides are 30.5 cm each, height 91.5 cm + 2 cm for the hem). Make a square in the center with a side length of 30.5 cm.
From the bottom corners of the square, measure 59.75 cm to the left and to the right.
Draw segments from the ends of the top and bottom sides of the pentagon to the resulting points. The result was a canvas with a window in the middle.
Sheath and glue the wooden frame of the kite.
Additionally, cut out 4 inserts for the “manger”. Each size is 30.5 x 30.5 cm. Insert them into the “windows” and glue them.
Make a tail from rope and leftover fabric, attach it to one side of the “manger”.
On the other hand, make a bridle from two fishing lines tied together and tightly tie a thread with a reel (rail) to them.

To ensure that the structure does not fall on one side and does not fall apart in the air, strictly adhere to the dimensions and firmly tie the parts together.

It is problematic to fly such a kite alone, so call your comrades and get a surge of joy from launching the “bird” into the sky.

DIY air raven - video

Volumetric (box-shaped) kites

To create a volumetric kite you will need:

wooden slats (window beads can be used) - 4 pcs. 1 m long and 6 60 cm;
large garbage bags;
a durable nylon harness on a spool from a hardware store;
scotch;
ruler;
square;
scissors;
glue.

A voluminous kite flies high and beautifully, and you can make it yourself

Secrets of a successful launch

You can fly a kite alone, but this requires a certain skill. It’s more convenient and more fun to do it together. One holds a kite, the other a spool of fishing line or thread (rail). The main condition for a successful launch is the presence of a wind of 3–4 m/s, as well as an open place without trees and wires.

The person holding the rope stands so that the wind blows at his back, unwinds 10–20 meters of rope and pulls it tight.
The second one moves back the length of the rope, runs up and launches the kite. He must seize the moment and pull the rope.
If the wind is not strong enough and the kite begins to lose height or cannot rise at all, the “leerman” will also have to run.

If you want to have a great time and get creative with the whole family, make a kite. Making it yourself is not at all difficult. The spirit of unity, joy and fun will be a reward for the time and effort spent.