. Drum design in accordance with GOST 5151-79, data on dimensions are given in the table below. The number of the drum corresponds to the diameter of the cheek in decimeters.
To protect the outer coils of a cable or wire, wound on a drum, from mechanical damage during transportation and storage, drum lining or packing with mats is used.
The main traditional method of sheathing is the imposition of a continuous row of boards on the edges of the cheeks and fastening them with nails through a steel tape that tightens the sheathing along the edges.
The dimensions of the sheathing boards and steel tape are shown in the table. In permitted cases, partial sheathing can be performed, in which the gaps between the boards are not more than 50% of their width.
Overall dimensions of cable drums.
Drum numbers | Height, mm | Width, mm | Square, m? | Volume, m? | Drum weight, with sheathing, kg | Drum weight, kg |
17v with timber | ||||||
18i with timber | ||||||
20v with timber |
Cables must be delivered on wooden drums (GOST 5151-79) with a diameter of at least 40 nominal outer diameters of the cable. The lower end of the cable with a length of at least 2.0 m must be brought out to the cheek of the drum, which must be protected from external mechanical influences. Cable ends must be hermetically sealed. The cable drum must have a solid sheathing.
Weight and overall dimensions of standard drums:
drum type | 8 | 8a | 8b | 10 | 10a | 12 | 12a | 14 | 14a | 14b | 14g | 16 | 16a | 17 | 18 | 18a | 20 | 20a | 20b |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
L, mm | 230 | 400 | 500 | 500 | 600 | 500 | 710 | 710 | 500 | 600 | 1000 | 600 | 900 | 750 | 900 | 900 | 1000 | 1060 | 1000 |
d, mm | 450 | 450 | 450 | 545 | 545 | 650 | 650 | 750 | 900 | 1000 | 1000 | 800 | 800 | 900 | 1120 | 900 | 1220 | 1000 | 1500 |
D, mm | 800 | 800 | 800 | 1000 | 1000 | 1220 | 1220 | 1400 | 1400 | 1400 | 1400 | 1600 | 1600 | 1700 | 1800 | 1800 | 2000 | 2000 | 2000 |
Weight*, kg | 34 | 36,5 | 36,5 | 39 | 55 | 99 | 107 | 165 | 152 | 186 | 202 | 241 | 237 | 277 | 422 | 422 | 584 | 555 | 720 |
* the mass of the drums is given without skin and may vary depending on the relative humidity of the air and storage conditions.
Capacity of standard shipping containers.
Container | drum type | ||||||
---|---|---|---|---|---|---|---|
8a | 10 | 12 | 14 | 16a | 17a | 18a | |
3 t | 4 | 3 | 2 | 2 | 1 | 1 | 1 |
5 t | 7 | 4 | 3 | 3 | 2 | 2 | 2 |
20-24 t | 24 | 15 | 8 | 7 | 6 | 6 | 6 |
External dimensions and weight of standard shipping containers
cargo containers
Maritime and rail cargo containers have a sufficiently robust design and provide multiple transportation without intermediate unloading by several modes of transport.
Wooden drums are designed for winding and transporting cables and wires. Currently, they are the main type of packaging for cable products. The design of the drums in accordance with GOST 5151-79 is shown in the figure, and the dimensions are given in the table. The number of the drum corresponds to the diameter of the cheek in decimeters.
To protect the outer turns of a cable or wire wound on a drum from mechanical damage during transportation and storage, drum sheathing or packaging with mats is used.
The main traditional method of sheathing is the imposition of a continuous row of boards on the edges of the cheeks and fastening them with nails through a steel tape that tightens the sheathing along the edges.
The dimensions of the sheathing boards and steel tape are shown in the table.
In permitted cases, partial sheathing can be performed, in which the gaps between the boards are not more than 50% of their width.
Dimensions and weight of drums (wooden with sheathing)
Drum number | Drum dimensions, mm | Estimated weight of the drum with casing, kg | |
---|---|---|---|
Height | Width | ||
8 | 840 | 350 | 51 |
8b | 840 | 620 | 53 |
10 | 1040 | 646 | 56 |
12 | 1260 | 660 | 132 |
12a | 1260 | 864 | 151 |
14 | 1440 | 875 | 217 |
17 | 1750 | 944 | 367 |
18 | 1850 | 1120 | 535 |
20 | 2064 | 1250 | 763 |
Design parameters of wooden drums
Drum number | Dimensions, mm | Number of pins, pcs. | ||||||
---|---|---|---|---|---|---|---|---|
Diameter | Neck length, l | Thickness | ||||||
cheeks, D | necks, dsh | axial hole | studs | cheeks, s | details | |||
5 | 500 | 200 | 35 | 12 | 230 | 38 | 16 | 3 |
6 | 600 | 200 | 35 | 12 | 250 | 38 | 19 | 3 |
8 | 800 | 450 | 50 | 12 | 230 | 38 | 19 | 4 |
8a | 800 | 450 | 50 | 12 | 400 | 38 | 19 | 4 |
86 | 800 | 450 | 50 | 12 | 500 | 38 | 19 | 4 |
10 | 1000 | 545 | 50 | 12 | 500 | 50 | 22 | 4 |
10a | 1000 | 500 | 50 | 16 | 710 | 50 | 22 | 4 |
12 | 1220 | 650 | 70 | 12 | 500 | 50 | 22 | 4 |
12a | 1220 | 650 | 70 | 16 | 710 | 50 | 22 | 4 |
12b | 1220 | 600 | 70 | 12 | 600 | 50 | 22 | 4 |
14 | 1400 | 750 | 70 | 16 | 710 | 58 | 28 | 6 |
14a | 1400 | 900 | 70 | 16 | 500 | 58 | 28 | 6 |
14b | 1400 | 1000 | 70 | 16 | 600 | 58 | 28 | 6 |
14c | 1400 | 750 | 70 | 16 | 710 | 70 | 28 | 6 |
14g | 1400 | 750 | 70 | 16 | 900 | 58 | 28 | 6 |
16 | 1600 | 1200 | 70 | 16 | 600 | 58 | 30 | 6 |
16a | 1600 | 800 | 80 | 16 | 800 | 58 | 30 | 6 |
17 | 1700 | 900 | 80 | 16 | 750 | 70 | 28 | 6 |
17a | 1700 | 900 | 80 | 16 | 900 | 70 | 28 | 6 |
18 | 1800 | 1120 | 80 | 20 | 900 | 80 | 36 | 6 |
18a | 1800 | 900 | 80 | 20 | 900 | 80 | 36 | 6 |
18b | 1800 | 750 | 80 | 20 | 1000 | 80 | 36 | 6 |
18th century | 1800 | 900 | 80 | 20 | 730 | 80 | 30 | 6 |
20 | 2000 | 1220 | 80 | 20 | 1000 | 90 | 36 | 6 |
20a | 2000 | 1000 | 80 | 20 | 1060 | 90 | 36 | 6 |
20b | 2000 | 1500 | 80 | 20 | 1000 | 90 | 36 | 6 |
22 | 2200 | 1320 | 100 | 20 | 1000 | 118 | 46 | 8 |
22a | 2200 | 1480 | 100 | 20 | 1050 | 118 | 46 | 8 |
226 | 2200 | 1680 | 100 | 20 | 1100 | 118 | 46 | 8 |
22v | 2200 | 1320 | 100 | 20 | 1100 | 118 | 46 | 8 |
25 | 2500 | 1500 | 120 | 24 | 1300 | 130 | 56 | 8 |
26 | 2650 | 1500 | 120 | 24 | 1500 | 140 | 56 | 8 |
30 | 3000 | 1800 | 150 | 24 | 1800 | 180 | 56 | 10 |
30a | 3000 | 2500 | 150 | 24 | 1700 | 96 | 46 | 10 |
Dimensions of sheathing boards and steel tape, mm
Mat dimensions, mm
Mat number | Drum number | Board thickness (not less than) | Board width (no more) | Nominal mat width | Wire diameter (not less than) | Steel belt width |
---|---|---|---|---|---|---|
M-200 | 5; 6; 8 | 16 | 100 | 200 | 1 | 25-35 |
M-350 | 8a | 16 | 100 | 350 | 1 | 25-35 |
M-450 | 14a; 86; 10; 12 | 19 | 100 | 450 | 1 | 25-35 |
M-550 | 126;146;16 | 19 | 150 | 550 | 1 | 25-35 |
M-650 | Yua; 12a; 14;14v | 19 | 150 | 650 | 1 | 25-35 |
M-700 | 17;18v | 19 | 200 | 700 | 1 | 25-35 |
M-750 | 14d;16a | 19 | 200 | 750 | 1 | 25-35 |
M-800 | 17a; 18;18a | 22 | 200 | 800 | 2 | 25-35 |
M-900 | 20; 206;22;186 | 22 | 200 | 900 | 2 | 35-45 |
M-1000 | 20a;22a;226;22c | 22 | 200 | 1000 | 2 | 35-45 |
M-1200 | 25 | 22 | 250 | 1200 | 2 | 35-45 |
M-1400 | 26 | 22 | 250 | 1400 | 2 | 35-45 |
M-1700 | 30 | 22 | 250 | 1700 | 2 | 35-45 |
Lengths of cables or wires that can be wound on drums, m
Cable diameter, mm | Drum number | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
5 | 6 | 8 | 10 | 12 | 14 | 16 | 17 | 18 | 20 | 22 | 25 | 26 | 30 | |
5 | 900 | 1300 | 3500 | - | - | - | - | - | - | - | - | - | - | - |
7,5 | 450 | 650 | 1700 | - | - | - | - | - | - | - | - | - | - | - |
10 | 200 | 350 | 900 | 2200 | 3000 | - | - | - | - | - | - | - | - | - |
15 | 100 | 150 | 400 | 1000 | 1400 | 2800 | 1700 | - | - | - | - | - | - | - |
20 | - | 100 | 200 | 600 | 800 | 1700 | 1000 | 2100 | - | - | - | - | - | - |
25 | - | - | 140 | 350 | 500 | 1000 | 650 | 1400 | 1700 | 2100 | - | - | - | - |
30 | - | - | 100 | 250 | 350 | 700 | 450 | 1000 | 1200 | 1900 | 2100 | - | - | - |
35 | - | - | - | 200 | 250 | 500 | 350 | 700 | 850 | 1200 | 1500 | - | - | - |
40 | - | - | - | 130 | 200 | 400 | 250 | 550 | 650 | 900 | 1100 | 1800 | - | - |
45 | - | - | - | - | - | 300 | 200 | 450 | 550 | 700 | 900 | 1500 | - | - |
50 | - | - | - | - | - | 250 | 150 | 350 | 420 | 570 | 1200 | 1700 | 2600 | - |
55 | - | - | - | - | - | - | - | 270 | 350 | 450 | 600 | 950 | 1400 | 2200 |
60 | - | - | - | - | - | - | - | 240 | 280 | 400 | 500 | 800 | 1200 | 1800 |
65 | - | - | - | - | - | - | - | 200 | 250 | 340 | 450 | 700 | 1000 | 1500 |
70 | - | - | - | - | - | - | - | - | 220 | 300 | 370 | 600 | 850 | 1350 |
80 | - | - | - | - | - | - | - | - | - | 220 | 290 | 450 | 650 | 1000 |
90 | - | - | - | - | - | - | - | - | - | - | - | 320 | 460 | 700 |
100 | - | - | - | - | - | - | - | - | - | - | - | 290 | 400 | 650 |
Packing mats are a continuous row of boards of the same length, fastened with steel tape or wire, which are wrapped around a cable or wire wound on a drum during packing. Mats are made with gaps between the boards. The sum of gaps should not exceed 50% of the total length of the M-200 mat and 30% for other types. As a reference, the table shows the lengths of cable or wire that can be wound on reels of individual sizes.
Wooden drums are designed for winding and transporting cables and wires. Currently, they are the main type of packaging for cable products. The design of the drums in accordance with GOST 5151-79 is shown in the figure, and the dimensions are given in the table. The number of the drum corresponds to the diameter of the cheek in decimeters.
To protect the outer turns of a cable or wire wound on a drum from mechanical damage during transportation and storage, drum sheathing or packaging with mats is used.
The main traditional method of sheathing is the imposition of a continuous row of boards on the edges of the cheeks and fastening them with nails through a steel tape that tightens the sheathing along the edges.
The dimensions of the sheathing boards and steel tape are shown in the table.
In permitted cases, partial sheathing can be performed, in which the gaps between the boards are not more than 50% of their width.
Design parameters of wooden drums
Drum number | Dimensions, mm | Number of pins, pcs. | ||||||
Diameter | Neck length, l | Thickness | ||||||
cheeks, D | necks, dsh | axial hole | studs | cheeks, s | details | |||
Dimensions of sheathing boards and steel tape, mm
Mat dimensions, mm
Mat number | Drum number | Board thickness (not less than) | Board width (no more) | Nominal mat width | Wire diameter (not less than) | Steel belt width |
14a; 86; 10; 12 |
||||||
Yua; 12a; 14;14v |
||||||
20a;22a;226;22c |
||||||
Lengths of cables or wires that can be wound on drums, m
Cable diameter, mm | Drum number | |||||||||||||
5 | 6 | 8 | 10 | 12 | 14 | 16 | 17 | 18 | 20 | 22 | 25 | 26 | 30 | |
Packing mats are a continuous row of boards of the same length, fastened with steel tape or wire, which are wrapped around a cable or wire wound on a drum during packing. Mats are made with gaps between the boards. The sum of gaps should not exceed 50% of the total length of the M-200 mat and 30% for other types. As a reference, the table shows the lengths of cable or wire that can be wound on reels of individual sizes.
If you have not found information on the products you are interested in, please contact the forum and you will certainly receive an answer to your question. Or use the form to contact the portal administration.
For reference: The "Reference" section on the site is intended for informational purposes only. The directory was compiled by sampling data from open sources, as well as thanks to information from cable manufacturers. The section is constantly updated with new data, and is also being improved for ease of use.
List of used literature:
Electrical cables, wires and cords.
Directory. 5th edition, revised and enlarged. Authors: N.I. Belorussov, A.E. Saakyan, A.I. Yakovleva. Edited by N.I. Belorussov.
(M.: Energoatomizdat, 1987, 1988)
“Optical cables. Manufacturers. General information. Structures, equipment, technical documentation, certificates»
Authors: Yury Timofeevich Larin, Anatoly Alexandrovich Ilyin, Victoria Alexandrovna Nesterko
Year of publication 2007. Publishing house LLC "Prestige".
Directory "Cables, wires and cords".
Publishing house VNIIKP in seven volumes 2002.
Cables, wires and materials for the cable industry: A technical guide.
Comp. and editing: Kuzenev V.Yu., Krekhova O.V.
M.: Publishing house "Oil and gas", 1999
Cable products. Directory
Installation and repair cable lines. Electrician's Handbook
Edited by A.D. Smirnova, B.A. Sokolova, A.N. Trifonova
2nd edition, revised and enlarged, Moscow, Energoatomizdat, 1990
our company manufactures and sells wooden cable drums 16. By purchasing cable drums No. 16 from us, you get:
- High-quality goods from the manufacturer and therefore low prices;
- the possibility of buying from 1 reel;
- the ability to make a drum according to your size;
- flexible pricing system and maximum discounts for your order volume;
- free shipping;
Dimensions cable drums 16
- A - cheek diameter;
- B - drum width;
- C - neck diameter;
- D - neck length;
- E is the diameter of the axial hole.
- F - stud diameter
- G - cheek thickness
Dimension table for cable drums 16
In accordance with GOST 5151-79, all wooden cable drums are used for cables with voltage up to 10 kV. Drums are made of softwood lumber or soft larch trees: alder, poplar, willow, linden, aspen (with the exception of birch).
Design parameters of protective materials for cable drum 16
To protect the cable coils on the drum during transportation and storage, the drum is sheathed from boards fastened with steel tape or laid with mats.
It is permissible to cover drum No. 16 through a board with a thickness of at least 25 mm and a width of not more than 250 mm, while the sum of the gaps between the boards should not exceed 50%. For reliability, the sheathing is fastened with a steel tape 0.3-0.5 mm thick and at least 25-35 mm wide. According to GOST, mats are made from boards or obapol. Today, manufacturers use mats as mats modern materials, films, polyester materials, etc., reducing the risk of damage to the cable sheath and cores.
Norms of winding cable on a drum 16
The maximum length of the cable that can be wound on the drum depends on the diameter of the cable itself. The calculated data are shown in the table below.
Price per cable drum 16
Ltd Cable systems offers its customers a favorable price depending on the volume of the order. Our production can provide customers with the required products in full and in a short time. Sale of cable drums No. 16 is carried out from 1 unit.
Payment Methods
Payment for goods is carried out by bank transfer.- Cashless payments delivery will be made within 1-2 days after receipt Money to our checking account.
Delivery
Our company has its own fleet of vehicles. Delivery is carried out on working days from 9-00 to 20-00.
If you want to pick up your cable yourself, then you will need to contact our managers to agree on the time of shipment.
When ordering more than 150,000 rubles. delivery in Moscow and the region (30 km from the Moscow Ring Road) is free of charge!
Chicken in kefir - recipes for marinated, stewed and baked poultry for every taste!
Simple Chicken Recipe in English (Fried) Recipes in English with translation
Chicken hearts with potatoes: cooking recipes How to cook delicious chicken hearts with potatoes
Recipes for dough and fillings for jellied pies with mushrooms
Stuffed eggplant with chicken and mushrooms baked in the oven with cheese crust Cooking eggplant stuffed with chicken