How to disassemble the door handle of an interior door: remove the built-in latch, round lock, video and replacement. Clear instructions on how to remove the handle latch How to unscrew a door handle in an interior room

01.11.2023

Door handles have a variety of shapes, but are divided into several main types:

Stationary. Such handles are not associated with a lock, are often equipped with a latch, and exist as an independent door accessory. They serve only for ease of use. Such handles are attached to the surface of the door leaf with screws and have a variety of designs. Their most popular form is U-shaped, which looks like a bracket fixed vertically.
Push. Their internal structure is more complex. The presence of a latch handle in the mechanism requires inserting it into the front door leaf and making a corresponding hole in the frame. When you press the handle, the latch tongue moves back with the help of a spring and the door immediately opens. In the free position of the handle, the latch is extended, and the door leaf can be slammed. Push handles ensure a tight connection between the leaf and the door frame, and as a result, high sound insulation of the room.
Rotary or knob handles. They are usually spherical in shape and have a keyhole located in the center of the body. To open the front door, the handle must be turned along its axis. The rotary handle itself can be opened with a key; on its other side there is a locking button.

Disassembling the stationary handle

After determining the type of stationary handle of the interior door, you can begin to dismantle it.

When attaching a stationary handle using self-tapping screws, you need to unscrew them with a screwdriver, then remove it and inspect it to look for damage or replacement. To change handles, you need to ensure that the new door trim is as identical as possible to the previously installed one. This is due to the fact that in the places where the old handle is attached, holes remain on the interior door leaf, which will be difficult to disguise if their location does not coincide with the fastening drillings of the new lining.

If the door handles have one common rod, you need to make sure of this before disassembling the door handle: on one side of the door you need to hold one handle, and on the other side of the door leaf the second handle should be turned counterclockwise. If the attempt is successful, this means that the handle is rod-shaped. If the result is positive, you need to unscrew it on one side, take out the entire structure on the other side and select a new handle identical to the one removed.

The mechanical latch handle is easy to remove. Using a screwdriver, you need to unscrew the screws securing the decorative trim, and then remove it. After this, you need to determine which mount the handle has. It is usually connected to the tetrahedral rod using a key that is threaded through their matching holes. Therefore, by removing the key, you can easily remove one handle and pull the second one out from the opposite side of the door along with the rod.

Disassembling a round handle with a rosette

Before disassembling a round door handle with a rosette, you need to inspect it thoroughly. If there are no fasteners for a screwdriver or key on the side of the handle, you need to manually separate its elements. To do this, you need to hold the handle on the side of the door leaf, and turn its other part, removing it from the screw thread.

After this, you need to remove the socket, unscrew the screws and remove the handle axis. If necessary, you can repair or tighten the lock and latch. Decorative parts of the handle must be removed without excessive zeal, so as not to damage parts of its mechanism.

Disassembling the round knob handle

The knob handle can be disassembled using a flat or Phillips screwdriver and a special key with a stop, usually included in the handle kit.

First you need to use a flat-head screwdriver to pry and then remove the handle cover. After the stopper becomes visible, you need to press it with a sharp and thin object and pull the handle towards you. From the side of the remote handle you need to unscrew two screws. Then, after removing parts of the handle from the front door, you need to unscrew the screws holding the latch. It should also be removed from the door.

It happens that the round handle does not require replacement, but reinstallation in the reverse order with a turn. To perform such an operation, you need to insert a latch into the door leaf, with the beveled side of its tongue facing the direction of the closed door and secure it with two screws. After this, you need to insert a part of the handle with a mechanism for the key into the required side of the door. On the other side, install the clamping part and secure it with two screws. You need to make sure that the handle is easily turned and returned to its original position.

After this, it is necessary to install the decorative strip, and the remaining part into the clamping part of the round handle. The square-section rod with the plate must be installed evenly in the handle, so its lock must be turned until the slot in it coincides with the position of the rod.

At the final stage, the handle needs to be put on, and when it reaches the stopper, it needs to be “sunk” by pressing the clamping part across the axis. After this, the removable part of the round handle must be pushed all the way to the clamping structure. The decorative strip must be aligned in the groove and fully inserted. After this, you need to check the operation and fixation of the handle. To do this, from the side of the latch and the latch mechanism, you need to turn the handle all the way.

Disassembling the lever handle

In the push mechanism of the handle, the entire structure is secured by an axial rod and additionally tightened by a tetrahedron.

The disassembly process should begin by removing the plugs around the handle using a screwdriver.
Then you need to loosen the rod fastening mechanism with a tetrahedron.
After this, you should unscrew and remove the fittings from the axle on one side.
Then you need to remove the other part of the handle along with the fixing rod. If there is a lock in the fittings, its mechanism should also be removed from the door leaf.

The handle is, of course, an important functional element of any door. Modern manufacturers supply the market mainly only with high-quality fittings. However, unfortunately, sometimes you still have to replace door handles with new ones. Some apartment owners prefer to entrust this procedure to hired craftsmen. But since, in principle, the answer to the question of how to disassemble an interior door is simple, if you wish, you can save money and handle this procedure yourself.

In what cases is replacement necessary?

In this article we will look in detail at how to disassemble the door handle of an interior door. Photos of this operation will, of course, also be provided to the reader.

Actually, replacing the interior door handle itself may be necessary in the following cases:

In case of breakdown. This is one of the most common reasons for the need for dismantling. The door handle mechanism wears out over time, either due to intensive use or as a result of rough handling of the door leaf. Some parts fail and the fittings stop performing their main functions.
If necessary, install a new model. Technology is developing very quickly these days. That’s why door handles of ever more advanced designs periodically appear on the market.
Home renovation. This may also make it necessary to remove the door handles. After all, when renovating, the interior of residential premises often changes in the most dramatic way. As a result, the design of old handles can create disharmony in the design.
The appearance of abrasions on the handle itself. The decorative coating of the main part of such fittings begins to wear off over time due to intensive use. Worn handles of interior doors, so that they do not spoil the overall impression of the decoration of the premises, of course, should also be replaced with new ones.

What may be required

Before you begin dismantling the door handle, you should, of course, prepare all the necessary tools. To disassemble this element, a home craftsman will need:

screwdriver;
an awl, nail or any other sharp and thin metal object.

In fact, at the actual work site, of course, it is necessary to provide good lighting. Some structural elements of door handles are small. With little light, they can simply get lost.

Types of door hardware

We will look at how to disassemble an interior door handle in detail in the article below. First, let's look at what types of such accessories actually exist on the market today. After all, the method of dismantling the handle depends, of course, primarily on the features of its design. Modern doors can be supplied to the market with fittings from this group:

stationary;
rotary;
push.

Also, interior doors are often equipped with special handles, which can also be locked with a key.

Stationary models

The design feature of this fitting is that in most cases it is in no way connected with the latch and lock. The stationary handle is used only for actually closing and opening the door. This type of fittings is attached directly to the canvas, most often with screws.

How to disassemble a stationary interior door handle

To remove fittings of this type from the canvas, a home craftsman will only need a screwdriver. Dismantle the stationary U-shaped handle as follows:

unscrew the screw on the main part;
remove the handles.

Such a simple technique can serve as an excellent answer, including to the question of how to disassemble a round rod door handle for an interior door. When removing such fittings, like conventional ones (in the form of a bracket), the screws most often also have to be unscrewed only on one side.

In some cases, the stationary handle can be supplemented with a mechanical latch. This fitting option is dismantled as follows:

Use a screwdriver to carefully unscrew the mounting screws;
are removed;
the rod with the cap is removed from the metal jumper;
the handle on one side is removed;
on the other side, the tetrahedral jumper is removed.

How to disassemble the door handle of an interior door: diagram for dismantling rotary fittings

Stationary structures on doors are used very often. But many modern interior models can also be equipped with easy-to-use rotary handles. The fittings of this type consist of the following elements:

a knob rotating around its axis;
halyard latch or bolt.

The angle of rotation of the knob of such handles is limited only by the stroke of the latch. The main advantage of this type of fittings is considered to be compactness.

Of course, many home craftsmen would like to know how to disassemble the handle of an interior door and this variety. Dismantling of rotary fittings is carried out according to the following method:

Decorative overlays are removed from the canvas;
the sharp end of an awl or nail is inserted into the side technological hole;
the pin moves away;
The pen itself with the cap is removed.

At the final stage, the home craftsman needs to pry off the latch and remove the decorative flange.

Push fittings

The handles of this variety are L-shaped. Office interior doors are mainly equipped with push fittings. But sometimes they are supplemented with the canvas of household models (most often plastic). When you press such a handle, the halyard lever begins to move, as a result of which the door opens.

How to disassemble

Dismantling the push handle begins with removing the cover located next to the lever. To remove this part:

press the rotary lock stopper;
pull the axle and handle.

For convenience, you should use an awl or nail at this stage. After the overlay is removed, you need to:

unscrew the screws securing the handle parts;
remove the tetrahedral rod;
remove the second cover;
remove the remaining handle parts.

Knob pens

Fittings of this variety, in fact, belong to the rotary class. However, in the design of such handles, among other things, there is also a locking button.

Removing the handle-knob

Next, let's look at how to disassemble an interior door handle with a latch and lock. To dismantle such accessories, in addition to a screwdriver, the home craftsman will also need a special key with a stop. The latter usually comes complete with the handle itself. The nob is parsed as follows:

use a screwdriver to pry up and remove the cover;
press the opened stopper with an awl or nail;
remove the knob;
Unscrew two screws from the side of the removed handle;
remove the loose parts of the structure.

The final step is to unscrew the screws holding the latch. Next you just need to remove the last one from the canvas.

Instead of a conclusion

Thus, we have figured out how to disassemble the door handle of an interior door with a lock, a regular rotary, push-button or stationary one. As you can see, all these types of fittings can be dismantled quite easily. However, the disassembly procedure should, of course, be carried out as carefully as possible. The home handyman needs to be especially careful when using a screwdriver or an awl. If they break loose, these sharp tools can very easily damage the decorative coating of the door leaf itself. And this, in turn, of course, will have an extremely negative impact on the appearance of the entire room as a whole.

Today there are a huge number of different types of door handles. All of them are quite reliable, but sometimes they still have to be replaced or repaired. However, a problem arises here - not everyone knows how to disassemble This is the most necessary element of furniture in everyday life.

How to properly remove a door handle mounted on an interior door yourself? Read about it below.

Reasons for dismantling

In most cases, it is necessary to disassemble the handle if:

she got loose;
fell into disrepair;
the lock itself needs to be replaced.

In the first case, there is usually no need to remove it. It is enough to simply tighten the screws holding it, or replace them with thicker ones (if the wood is worn out).

Unfortunately, budget versions of handles, in principle, cannot last long, and besides, they are made completely unsuitable for repair. The coating on them is usually quite unstable and will quickly peel off during use. Therefore, when they fail, they are simply replaced with a new one.

Often, during renovations, owners decide to replace old handles with new ones that are more suitable for the design being created or simply look more modern.

When buying a new kit, try to choose those that are made of good metal with a minimum number of components. Reliable pressure models, for example, should be equipped with bearings - they can serve you for several decades. By the way, quality is very easy to determine: the heavier the fittings, the higher it is.

The most common types of door handles

Most often, the following three types of handles are installed on interior doors:

stationary;
nobs (round);
push.

The latter variety is considered universal, since it can be equally often seen on both entrance and interior doors. This mechanism in its normal position has an extended locking tongue, and when it becomes necessary to enter the room, the handle is pressed and it leaves the grooves. In this case, a lock is usually cut into the canvas, protected by special pads. In order not to damage the latter, disassembly must be carried out as carefully as possible.

In our country, a round handle equipped with a latch is used only on interior doors. Abroad (for example, in the USA) they are often placed on input. It has a key hole on the outside and a locking button on the inside.

Stationary models are installed mainly on swing doors. This design is convenient, but not very functional. In essence, it is an oblong bar on which a U-shaped bracket is attached. In the simplest versions, no locking mechanisms are provided - the door is closed with a separate bolt. More advanced models also have a roller latch, installed independently.

Prepare the following tools for dismantling:

flat and Phillips screwdrivers;
thrust wrench (included with the product).

If the model is without bolts (that is, with hidden fastenings), then you need to act in this order:

Using a flat screwdriver (being careful not to damage the decorative coating of the door), unclip the trim located at the base;
Unscrew the screws hidden under it;
use a stop wrench to press directly on the stopper;
remove the handle by carefully pulling it towards you;
After dismantling, unscrew the screws holding the locking mechanism.

In simpler round models, disassembly is much easier - just unscrew the two long bolts located on the back side on either side of the latch.

In this case, you just need to unscrew the self-tapping screws or screws securing the strip to the door leaf.

Here it is worth understanding that this type of handle must be replaced with one of a similar size. Otherwise, traces from self-tapping screws will not be hidden. They are especially visible on varnished surfaces.

Individual models are connected with bolts through the door - this method of fastening is convenient for both the manufacturer and the consumer. In this case, you just need to unscrew them from the back and both handles will be removed.

Lever handle

All that is required is to remove the trim (in most models it is connected to the handle). In simpler versions, you just need to unscrew two screws from the door leaf.

In advanced ones, all fasteners are hidden behind a decorative cap - it either snaps off or is screwed onto a thread. By removing it, you will have access to 3-4 screws that need to be unscrewed with a screwdriver. Don't forget to also remove the clamping screw mounted directly on the handle - it secures the square pivot rod. After this, disassembly can be considered complete.

Assembly nuances

Before placing the handle in its intended place, secure the locking mechanism - turn its oblique surface in the direction of closing the door.

It is important to tighten all screws and screws as tightly as possible - the better you do this, the longer they will not come loose.

After assembly, check how the mechanism works - the latch should fit freely into the groove and ensure reliable fixation.

How to disassemble the door handle of an interior or kitchen door? Each of us may face this question sooner or later. Breakdown of this mechanism occurs due to its regular use. However, like any other mechanism, the door handle handle is designed for a certain number of jobs, after which the mechanism needs to be overhauled or replaced.

Various options for interior door handles

In this text, we will look at how to disassemble an interior door handle structure, and will clearly demonstrate the simplicity of this procedure, after which everyone can do it independently at home, having at hand a small set of tools and two hours of free time to disassemble such an element , like a handle mechanism. It is worth noting that there are currently many different door opening mechanisms, so let’s look at examples of disassembling the most popular and in demand models today.

Device diagram and door handle mechanism

In this case, we will begin the analysis of examples with the rules for disassembling an ordinary stationary handle, which does not have a push set and a mortise lock for a response cylinder. Here we need a flathead or Phillips screwdriver or a screwdriver with a bat. Let's look at an example of parsing a regular stationary handle:

Disassembling a round handle with a rosette

A socket, as a rule, refers to a mechanism that allows you to lock a lock using a special small key on one side and an accessible thumb on the reverse. In this case, disassembling such a mechanism consists of the following steps:

If the handle requires repair or replacement of a certain mechanism, then you will have to completely disassemble the individual parts and find the cause of the malfunction.

Important. When disassembling a round handle with a rosette, all fastening elements must not be lost, otherwise you will not be able to assemble the mechanism together and install it in its original place after reassembling and replacing one of the parts.

Watch the video: door handle repair.

Disassembling the round knob handle

How to disassemble a round door handle-knob? This question interests many owners when moving into a new apartment, where door leaves with a non-removable handle mechanism are installed. In this case, to remove this element from the door leaf, as a rule, the following steps are performed:

An element such as a non-separable round handle is attached using conventional fastening bolts. The mechanism is made in such a way that no repair work will be carried out later, but a new cover will be purchased immediately and will take the place of the old handle.

It is worth noting that this process is associated with the purchase and replacement of a mechanism; otherwise, there is no point in removing and attempting to disassemble such an element.

Since the manufacturer did not provide options for repair and installation of the handle after repair in its original place.