DIY phone stand for the office, home and car: MK with step-by-step photos and video tutorials. How to make a phone stand? A convenient gadget from scrap materials How to make a car holder for a smartphone yourself

Stand- a useful and convenient thing in everyday life. For example, phones or tablets, which have become an integral part of our daily lives, are a little inconvenient to use in a hospital setting. If you do not have a branded or suitable case that can secure the gadget in an inclined position, then you will have to hold it with your hands. This is inconvenient when watching a movie for a long time, while eating or reading for a long time.

The best solution to this problem may be to purchase a stand specifically designed for this purpose. But sometimes we need it right now, or we simply feel sorry for the money for a seemingly temporary thing. In this case, you can make a stand yourself from available materials. It does not take a lot of time! A couple of minutes and you can comfortably sit in front of the screen of your gadget, while freeing your hands.

In this article we will rely primarily on options for phone stands, but they can also be slightly modernized and used for tablets, books, even for pictures or plates. It all depends only on your imagination. But if she is sleeping, then there is nothing wrong with it. The options proposed in the article are discussed in detail, and it will not be difficult for you to slightly increase the dimensions specifically for the thing for which you are making a stand.

Handy materials to help

You can make a stand yourself from scrap materials. Almost any material you have at home is suitable for this. It could be:

• wire
• cardboard
• cardboard box
• fabric and padding
• bottle
• tree
• paper
• pencils
• constructor
• stationery holders
• unnecessary plastic cards
• old cassette player

Only your imagination can limit your choice. Of course, the stores offer a huge selection of products in this category. However, making the holder yourself has a number of undeniable advantages:

• Rapidity. Sometimes you need a stand as soon as possible, and there is no time to go to the store to buy it.
• Inexpensive or free. You can make a holder from what you already have in your home.
• Originality. With your own hands you will create a truly unique product.

Phone stand made from pencils

In order to assemble this structure, you will need:

• 6 pencils
• 4 rubber bands

Despite the intricate appearance, this design is very easy to assemble. The idea is that two pencils are held together at the ends with an elastic band, and the third pencil is inserted between the turns of the rubber band. The result is a geometric figure - a tetrahedron. If you still have questions about how to make this version of the stand, then use the example below.

The picture clearly shows how the pencils are held together.

To avoid slipping and make the stand more stable, use pencils with erasers at the ends.

Phone stand made from paper clips

The most economical and simple version of the stand, to create which you only need a paper clip.

To do this, you need to bend it into the same shape as in the figure.

This design will hold your phone without any problems.

Plastic card phone stand

Any unnecessary plastic card will do for this. Simply fold it along the short side, leaving about 1 cm from the edge, and bend the remaining part in the opposite direction exactly in half. You will get it as shown in the picture.

Cardboard phone or tablet stand

Cardboard- an excellent material that is widely used for various homemade “things”. Probably, many people have a cardboard box or an unnecessary sheet of cardboard at home. It’s worth trying to use it to create a stand.

To do this you will need:

• cardboard
• scissors

From a sheet of cardboard folded in half, cut a strip measuring 10 by 10 cm. Then draw the figure shown in the figure on it and cut it along the contour.

You will get a comfortable and stable stand that you can carry with you.

This holder option can be used for a tablet or book. The essence of manufacturing is the same, you just need to adjust the part to the size of your gadget, as shown in the figure.

It is necessary to use cardboard that bends well so that the stand does not “open up”.

It is important to understand that a cardboard stand is not necessarily a sloppy brown structure. It can be stylish, comfortable and beautiful. You just need to change the shape a little and the result will change dramatically.

Origami paper phone stand

You may not have cardboard at home, but you do have thick paper. This is also suitable for making a stand! For this you only need paper and scissors. Cut out the shape according to the diagram below, then fold along the fold lines.

That's all. The origami stand is ready to use.

Wire stand for phone or tablet

One of the budget options, made from scrap materials.

During work you will need:

• wire 2-3 mm thick
• pliers
• wire cutters to cut wire

Everything is done as simply as possible: in the right places the wire is bent so that it becomes a holder.

To make the structure more stable, the wire can be connected with a rubber band.

Such a stand can be a real design solution: you can paint it a different color and it will be completely transformed, or you can fill the “voids” with decorative wire curls. This design is suitable for both a phone and a tablet, the only difference is the size of your gadget.

Unusual Lego phone stand

Probably, this version of the stand will especially appeal to teenagers and men. Here you can show your imagination by creating a whole complex for your smartphone with the ability to change position, and maybe even amplify the sound of the speaker, or get by with a minimum of details. The creative process will not only bring pleasure, but also bring benefits.

To make such a design, you will need several parts and a base. The level of inclination can be changed by adding or removing parts. And the position of the gadget is easy to change, also adjusting the design.

Phone stand from an old cassette deck

Perhaps someone has an old cassette player lying around at home. It is unlikely that it will ever be useful, and with the advent of disks and electronic media, no one uses cassettes anymore. But still, you can find a use for the cover in which the cassette was located.

To do this, just “turn” the cassette player inside out, tilting the lid back. The hole in which the cassette was held can accommodate a telephone. The advantages of this design are that it is easy to wash and transparent.

Phone stand made from a plastic bottle

Many of us go on a trip or run errands by train. Often, on trains there is nothing near the sockets where you can securely place your phone. However, the gadget is discharged and needs to be charged. You can simplify this task by using a stand made from a bottle. Its essence lies in the fact that the gadget is placed in the cut off bottom of the bottle, which remains hanging on the plug from the charging device. This way, you don't have to stand nearby and hold the phone in your hands or look for a way to secure it.

To make such a stand holder you will need:

• plastic bottle for shampoo or drink
• scissors

First, wash the bottle to remove any remaining makeup or soda. Then, mark it. The back wall of the stand should become a kind of handle on which the phone holder will hang. The front wall should be high enough so that the phone does not fall over the edge. The next step is to cut out the stand along the office.

To do this, it will be more convenient to use a sharp stationery knife.

Cut a hole in the top of the handle so that it can be attached to the charger plug. You can decorate the stand to suit any taste: using adhesive paper, paints or stickers.

Wooden phone or tablet stand

If you want to make an original stand, then one of the good materials for making it is wood. Such a stand will be strong, durable, and can also serve as a good gift for a loved one. It is important to understand that working with wood requires some minimal skills and special tools.

In the process of work, in addition to a wooden block, you may need materials such as:

• jigsaw
• sandpaper
• wood cutting knives

Be careful and attentive when working with such tools.

Stages of making a stand:

• Process the wooden block by sawing off the excess parts and making a recess at the top in the middle for a phone or tablet.
• Using sandpaper, remove all roughness and splinters from the surface of the future holder.
• You can coat the finished product with varnish or special paint.

Another option for a wooden stand for a phone or tablet is an analogue of its cardboard version. In this case, it is better to use plywood instead of a wooden block.

To do this, make a stencil of the “legs” of the holder and a crossbar that will fasten them together. And transfer it to the plywood. Carefully cut out with a jigsaw and smooth out any unevenness and roughness with sandpaper. Using super glue, connect the legs and the crossbar.

DIY stand case for your phone or tablet

The most popular option for a gadget stand is a stand case. You will have to tinker with it a little, but the result is worth it. This option is convenient to take with you when traveling, it is durable and can protect the screen.

To make such a holder you will need:

• facing material, it is best to choose leather
• material for interior cladding
• plain and thick cardboard or rigid material
• elastic band for fastening
• pencil
• ruler
• scissors
• double sided tape

How to do it?

• Cut the cardboard according to the size of the tablet so that it completely covers it. This is the future basis, the dimensions of which will be basic for all elements.
• Make several folds in the same way that the front of the case will then need to bend to support the tablet.
• Now we take hard material, which will give the case stability. We cut it so that it follows the contour of the workpiece.
• We apply it to the base and make an edging so that it does not interfere with the folds.

• From the inside we treat the case with soft materials, gluing it to the base blank with double-sided tape.
• The next step is fastening for the tablet itself. To do this, we make small holes in the rigid elements for elastic bands that will hold the tablet.

• We glue the finishing material on the outside.

Do this as carefully as possible. The appearance of the product will depend on this.

That's all. The stand is ready! It is convenient and can be used not only as a holder, but also to protect the screen.

Stand-bag for tablet or phone

An original and cute version of a gadget stand. It is suitable for girls and can be a cute home accessory.

To make it you will need:

• scissors
• textile
• padding material
• thick cardboard
• thread and needle
• button

Manufacturing process:

• First you need to cut out a template from cardboard according to the size of your gadget.
• Then cut out a rectangle from the fabric twice the size of the resulting template.
• Fold the fabric base in half and mark with stitches a fold 10 cm from the edge.
• Sew the bag, leaving one side unsealed.
• After turning the bag inside out, position it so that the seam runs through the middle and a diamond shape is formed at the end. After ironing it, bend the top corner of the diamond so that it is in the middle and sew. This is shown in more detail in the figure.

• Then insert cardboard into the product and fill the remaining space with padding material.
• Make a seam along the very edge of the template. Folding the edges of the unstitched side, carefully stitch it, leaving an opening for stuffing.
• Make a roll and sew up the hole.

That's all. The product is ready. You can decorate it to your liking, giving it even more charm!

Phone stand made from paper clips

Another interesting and at the same time very simple option. If you have several office clips at home, then feel free to use them!

You will need 2 clamps: one larger and the other smaller. By connecting them together as shown in the figure, in a couple of seconds you will get a phone holder.

This can also be done from two clamps of the same size.

Phone stand made from an unwanted CD

An unnecessary CD can serve as a stand for your phone. In order to make such a holder, you will need a little time and work with temperature. So be careful!

Conclusion

For a creative person, all boundaries are erased. And he can create any object with his own hands from scrap materials. For the stand, you can use options such as an ordinary office business card holder, or a book stand that is well known to all of us since school days, even a toilet paper roll can be an excellent holder option.

There are many opportunities for creativity, you just need to look around carefully. Maybe you will make the most unusual accessory for your smartphone with your own hands!

A big and warm hello to everyone! I haven’t written in the “DIY” section for a long time. Regular readers have probably forgotten that such a thing exists. But oh well, today I will improve. And I will share with you very cool ideas on how to make a phone stand with your own hands.

Lately I've been reading a lot, studying information, watching videos. But holding the phone in your hands is not very convenient. And it happens that, for example, I’m preparing food, cutting food, and I have to prop up my phone with whatever comes to hand. And suddenly the idea came to me, why not buy a stand at the store that will make my life much easier. Having scoured the Internet, finding the answer to the question of what it costs and what it costs, I came across a photograph that showed that very thing, but made in seconds and with my own hands. Then the idea sparked in my head to put together several inspiring ideas. And in the end, I hope, an interesting post was born. So, let's begin!

I suggest starting with the very best option for a paper phone stand. You can build it at any time and anywhere, the main thing is to have a sheet of paper approximately A4 size on hand. It seems to me that students and schoolchildren will like this idea. The main principle here is to take a sheet of paper, preferably thick, and fold it lengthwise to make at least 3 layers, but of course everything depends on the width. Then you need to fold the paper again, making folds across it so that 3 wide edges of the same width and one small one are formed. Look at the photo, it clearly shows what the end result should be. The last step is to make two small folds.

I can’t even imagine who could have such a rarity as a box of tape cassettes for a tape recorder. But it turns out that such an object, seemingly completely useless, can be used. In a couple of seconds, by turning it over in a certain way (see photo), you will get a very cool stand for your smartphone. Moreover, if you paint it with paint from a bottle, then few will guess what it is made of.

If you have several DIY kits lying around at home, then it is quite possible to build a structure to hold your phone in a horizontal position. And this is done in a matter of minutes. And it’s also easy to disassemble it, putting it back in place.

Plastic card as a phone stand? The idea is bold, but quite realistic. All you need is a couple of cards and some strong scissors. Trim the parts as shown in the photo and enjoy watching videos, photos and reading e-books.

The next way to make your life easier is to stock up on six pencils and four erasers. Basically, you need to make a three-dimensional figure, as shown in the picture. Start with a simple triangle, then add one edge at a time, securing it all with rubber bands. Get an original delivery for the phone.

Having a couple of wooden pieces in the house, it is possible to make an interesting and original, and most importantly durable device for smartphones. You can glue the parts with hot or universal polymer glue. And indeed, this design will serve you for a very long time.

Here are some more lifehacks for your phone to keep it running while charging. Such devices are needed mainly when there is simply nowhere to put the gadget unless there is a table or cabinet nearby. Such holders are made from a plastic bottle, as in the first case, or from thick cardboard, as in the second.

I've seen so many ideas with toilet paper rolls, but this one! You will need the sleeve itself and 4 paper buttons (to be honest, I don’t know what they are called correctly). Attach them as legs, cut a hole at the top to size so that you can put your phone through it, and enjoy the result. It is better, of course, to decorate such a stand with something or simply paint it.

As you already understand, making a phone stand out of paper is the easiest option. So, you will need a piece of very thick cardboard. If there is none, then make it from several layers, gluing them to each other. Cut holes in the part as shown in the picture. Moreover, such a holder is suitable not only for smartphones, but also for tablets.

Well, the very last way I suggested to make a phone stand with your own hands is to use a paper clip. I’m sure everyone will have it, and if not, then it’s not very expensive in stores. Take a couple of these devices and bend one round part of the paper clip inward. It will serve as a barrier for the phone to prevent it from rolling off. Place one binder inside another. Place the smartphone so that it rests on one ear, and the second one is bent towards the screen. Here's a simple holder for you!

That's all for today, I hope you liked the ideas and were inspired to make one of the presented gizmos! See you again!

A mobile phone is a thing that should always be at hand. In the age of information technology, it is difficult to argue with this. Sitting behind the wheel, cooking in the kitchen, doing needlework or other things when your hands are not free, a homemade and original phone stand will be a necessary accessory.

It is simply impossible to imagine a modern person without a smartphone or telephone.

By material

In order to know how to make a convenient phone stand, let’s find out what material is used to make it.

Often, an owner who wants to always have a phone at hand wants to position it in a convenient way.

• Metal. The metal accessory will be durable and last a long time. The cost of such a thing will be higher in comparison with others made from more affordable material.
• Tree. Popular and accessible material. Bamboo and ash are a common type of wood that is used to make holders.
• Ceramics. These holders look elegant, but, unfortunately, are very fragile. Masters who work with this material make coasters in the shape of animals, shoes, hearts, and geometric shapes.
• Textile. A more childish option is when the phone is placed on a small, specially sewn pillow or soft toy. You can make this type of phone stand with your own hands.
• Plastic. A universal material that allows you to choose color and shape.
• Paper. You can very easily make a phone stand out of paper with your own hands. This is a practical, lightweight option when there is no alternative at hand.

Modern smartphones have learned to do many different things, successfully replacing our watches, voice recorders, navigators, players, and even mobile cinemas.

By style

Note! When choosing a stand style, consider not only your individual preferences, but also the design features of the room in which it will stand.

Before you order or create your own phone stand, decide on the style.

• Vintage. An option made in the form of an antique item made of wood, metal, leather or ceramics, with a structure for fixing the gadget.
• Minimalism. Plastic and paper are the main materials of this style. An excellent choice for those who are not interested in unnecessary details.
• Classic. Option for conservatives. Mainly the manufacture of holders in this style is made of wood and metal.
• High tech. Modern style, without additional decorative elements. The material used is plastic.

The stand is a useful and convenient thing in everyday life.

By purpose

On the table.

The main thing is the strength of the structure.

1. Adhesive based. Products are in the form of a circle, one side is glued to the phone, simulating a support, which makes it possible to place the phone at an angle of 45 degrees.
2. On a stand. Fixes any size device. It consists of a bottom plate that is installed on the table and a clamp in which the gadget is placed.

Universal.

If you are a creative person, then you will find the makings of a phone stand in any object.

1. There is an option when the bottom side of the holder has a mount that can be attached to a table or any other surface. The base of such a device is usually flexible and rotates 360 degrees.
2. The second popular option: in the form of a flexible tripod, which can take absolutely any shape. This type can be used: while walking, in bed, while washing dishes, in the car - absolutely in any convenient place.

A desktop phone stand for the home should not only be comfortable, but also durable, stylish and fit well into the interior of your home.

In the car.

It is very convenient to purchase a magnetic holder for your car.

Installation principle: one side is attached to the device using a magnet, and the other to any accessible place in the car.

Phone stand made from unusual and scrap materials

Stationery binders

The device is quite durable and can hold the phone.

If you suddenly need to fix your phone in a vertical position in the office: here's how to quickly make a phone stand using improvised materials with your own hands. The binder consists of two parts, a colored clip made of plastic or metal and a steel-colored paper clip. We take two binders and fasten them together. We push one paper clip towards the phone.

We use pencils

Try making a phone stand out of pencils.

Materials needed: 6 pencils and four erasers. We assemble a three-dimensional triangle: a tetrahedron. We fasten the ends of two pencils together and insert the third between them.

Important! To build a structure, you need to take pencils with rubber bands at the ends to avoid unnecessary slipping.

Bottle models

To make a model from bottles, prepare the material: any bottle of cleaning product, dishwashing detergent or shampoo, scissors.

Bottom line: the work should resemble a pocket.

Important! The size of the bottle should be at least twice the length of the phone.

Cut off the neck of the bottle and the front wall to the middle. This stand will be useful for use while charging. To do this, make a hole in the upper rear part of the container for the charger. Fold the phone inward, and insert the charger first into the hole, then into the socket.

This model can be painted or decorated with paper or fabric.

Paper clips

The option with a paper clip will require minimal cost and time.

The paper clip must be straightened into a straight line. We bend both edges of the paper clip upward, retreating 1 cm. Then we retreat 4 cm on both sides, this part of the structure should fit snugly to the table, like a support. The next step is to bend the paperclip in the middle upwards so that the previous bent parts remain straight, perpendicular to the table.

From a credit card

Place the resulting zigzag on the table, the work is ready.

Place the old, unnecessary credit card in front of you in a vertical position. Step back 1 cm from the edge and bend the edge towards you. Divide the rest in half, bend it, but in the opposite direction.

From Lego

Take a wide plate - the basis of a children's construction set.

It is necessary to attach several bricks from the designer to the plate to support the back panel of the phone; the angle at which it will be fixed will depend on the height of the wall. To fix the device on the sides, take a few more identical bricks and secure them to the base.

From the cassette case

We insert the mobile device into the pocket where the cassette was once stored.

If you have an old cassette box at home, it’s very easy to create a holding structure: open it as far back as possible so that the part with the cassette pocket remains in front, and the top cover of the cassette box is placed on the table.

DIY phone stand made of paper and cardboard

Attention! Before you make an origami phone stand with your own hands from paper, find and prepare the patterns you like.

You can make a small phone stand with your own hands from the simplest materials.

• Folding cardboard stand. You can make a phone stand from thick cardboard. Take a sheet of cardboard and cut out a shape: 10 by 20 cm. Fold it in half. Step back 2 cm from the fold and cut the cardboard with scissors at an angle of 45 degrees, not reaching the edge 2.5 cm. Then change the angle at which you cut, it should be perpendicular to the bottom edge, in this position cut another 1.5 cm, lower the corner of the scissors 45 degrees and cut 1.5 cm down, and then again perpendicular to the bottom edge, all the way to the end.

Homemade smartphone stand made of cardboard.

• Cardboard triangle. Before making a simple cardboard phone stand, prepare the materials: a strip of cardboard, push pins, glue or tape. Take a strip of cardboard and fold it into a triangle. Secure the edges with glue, tape or buttons.

In 5 seconds you can make a strong and sturdy stand for your phone.

• From the sleeve. An excellent DIY phone stand made of cardboard will come out of the remaining paper towel roll. The wide sleeve must be cut in half. In the resulting part, cut a horizontal hole where the phone will be placed. You need to make legs from the buttons so that the stand can be placed on the table.

Here's how to quickly and easily make a functional phone stand with your own hands from cardboard.

• Origami. A regular A4 sheet will make a good paper phone stand. There are several schemes by which you can create an excellent support for the device. Knowing how to make a paper phone stand, you can always fold it in a few minutes and use it with pleasure.

Phone stand made of paper using origami technique.

DIY wooden phone stand

We take a wooden beam and make a blank out of it, leveling and processing the edges. We attach the gadget and cut it to size. The corners must be rounded and sanded. Having made markings for the grooves, we cut them out. Take a chisel and thoroughly clean the cut grooves. Sand the work again before applying oil.

The homemade and original stand is ready.

DIY wire phone stand

Using ordinary wire, twisting it in a variety of ways according to patterns, you can create an original holder for a mobile phone. The main thing is that the weight of the device is evenly distributed on the homemade holder.

The advantage of this DIY phone stand is that you can place your phone on it either horizontally or vertically.

Everyone knows why and when a phone stand is needed, knowing quick ways to create one from improvised means, you can always comfortably watch a movie or do household chores and communicate with friends via video conference.

This stand can also be used as a holder for tablets and e-books.

VIDEO: How to make a phone stand.

50 options for original phone stands:

The mobile phone has become an invariable attribute of the modern person. And on the road, at home, and on the desktop, a useful gadget is given the main place, otherwise “what if someone calls, but I don’t hear/see.” To conveniently place a cell phone on a table, stands were invented. You can buy them in the store, or you can make them yourself from scrap materials. Even the most useless at first glance “unnecessary garbage”, like cardboard packaging for dairy products or a long-used CD cover, can be useful in your work.

Cardboard stand

The first option is to make a mobile stand out of cardboard. This does not have to be a solid piece of material; you can take a used small-volume milk carton (0.5 ml). There is no need to glue anything: you only need scissors.

The box must be thoroughly washed, crumpled and the bottom cut off. Then cut it along the folds.

The work will require a central part in the shape of two rectangles. There is a fold between them. It needs to be cut out and folded with the outer side inward, pressing the fold with one hand.

Starting from the opposite end, from the bottom, you need to cut out a shape that resembles the letter “T”. It is narrowed at the top, but has a beveled corner.

When the figure is unfolded, the bottom edges become where the phone sits. It rests on the central edge. The budget stand is ready!

CD cover stand

Surely everyone has a couple of DVDs lying around their house. One of the unnecessary covers can be turned into a stand for your mobile phone.

To do this, the cover must be cut in half. Then cut off all the holes and rivets so that only a smooth rectangle with two curved corners at the ends remains.

The plate must be clamped with tweezers or pliers and placed in boiling water. This will make the plastic soft and pliable.

Holding the plate with pliers or any other tool, it must be bent so that one of the corner ends does not reach the other slightly. 2-3 cm is enough; the phone will be located in this space. One of the corners is glued to the surface. The result is an interesting and light stand. The device can be placed on it both vertically and horizontally!

Paper clip stand

A cell phone stand made from a paper clip is an interesting thing that can be made in 2 minutes. To do this, you need a large, massive paper clip, which you just need to straighten correctly!

To begin, the wire is completely straightened into a line. Then you need to pinch it and bend it again:

1. Bend in the shape of a tick - U.
2. Bend both ends at an angle of 90 ° C, starting approximately in the middle.
3. Bend the ends of each end slightly.

Thus, an ordinary paper clip turned into a laconic stand. The phone lies horizontally on it.

Stand made from toilet paper roll

Every home has something as good as a roll of used toilet paper! Don’t rush to throw away the cardboard form – it can be turned into a mobile phone stand in a matter of minutes.

All that is required is to correctly cut part of the sleeve at an angle. There should be a small piece of cardboard left in front to create a stop. Such a stand will not be able to accommodate a phone that is too tall, but the standard size will fit perfectly.

If desired, the stand can be decorated: painted, wrapped in fabric or covered with paper for gifts. And no one will believe that it was once part of a toilet roll.

all the work step by step

Conclusion:

When working with familiar things, it is important to give free rein to your imagination: try it on, think, experiment. Then stands for mobile phones will appear in the house regularly - and always different and interesting!

The use of modern technical innovations requires us to change some details in everyday life. For example, using a smartphone in a car will be much more convenient if you attach the device in close proximity to you on a special holder. This way, you can not only easily answer the call, but also benefit from navigation programs or other similar applications. In this article we will look at the most common mounts for a cell phone, which allow you to conveniently fix it in the car.

Some phone holders have a suction cup, which significantly expands the possibilities of installing such a stand, including on uneven surfaces. Over time, the suction cups lose a little stickiness and do not stick well, but this can always be corrected by rinsing them in warm water (the liquid will wash away all dirt and accumulated fats). This type of cell phone holder is well designed, and all buttons or ports of most gadget models will be fully accessible without being covered by elements of the device. In addition, various mount options allow you to mount your phone on the windshield or even on the dashboard, but any other convenient place in the car will be inaccessible.

The advantages of using this particular option include ease of installation and the absence of the need to make any changes to the interior elements, while the main disadvantage of this type of phone mount is sensitivity to the peculiarities of placement. For example, if the car window is located at a strong slope, then it will be possible to attach the suction cup only in its upper part. The too long bracket is also inconvenient to use, since it swings the smartphone violently when the car is moving.

Important!When choosing a suction cup holder, pay attention to the thickness of the rubber from which it is made. In the cold season, material that is too thick will quickly lose its elasticity, and the holder will simply fall off the glass.

Clip for attaching a phone with a flexible cord

This option for placing your phone in your car will cause you a lot more problems than benefits. Despite the fact that it allows you to fix the phone almost anywhere in the vehicle without the need for glue or suction cups, such holders will create quite a lot of noise when driving, blocking the air flow coming from the deflector. Considering that the clothespin is most often attached to the heater grille, which has many thin jumpers-blinds, it is better for you not to drive over holes and potholes, as strong shaking can cause the fastener to break.

Among the advantages of using the clip is the ability to rotate the phone 360 ​​degrees (made possible thanks to the presence of a flexible cord), but this does not make it unique. Therefore, mounting the phone on a deflector or in any other place using this method is not the best option for solving the problem of placing a smartphone in the car.

Phone holder for steering wheel

A phone mount on the steering wheel of a vehicle is a fairly simple design in which the platform for the gadget consists of two black plastic plates that fit into each other. They have a spring inside that allows you to use the holder for phones of very different widths, holding them from below and from above using silicone rollers.

You won’t have to spend a long time figuring out how to install such a phone holder in your car. Mounting on the steering wheel is done using a silicone loop, at the end of which there is a plastic pedal. By pressing it, you can remove the holder from the steering wheel.

Among the disadvantages of this type of fastener, it is worth highlighting the limited visibility of instruments on the dashboard (in particular, the speedometer indicators are poorly visible, which can easily lead to a fine for speeding), the appearance of a feeling of motion sickness in the initial stages of using the device, which occurs due to the rotation of the phone along with the steering wheel of the vehicle. In addition, if the power cord is connected to the phone, the cord often wraps around the steering wheel when turning. True, this does not always happen.

Bracket that is adjustable

Another option for devices for holding the phone while moving in a vehicle. The adjustable bracket is mounted on the ventilation grill and is suitable for smartphones with different body widths. The gadget is inserted between two limiters, one of which extends down, thereby providing the space the phone needs. The advantages of using this type of mount include the compactness of the mount itself and the ease of installing the phone, and among the disadvantages, there are all the same disadvantages as in the case of using a clip: noise, knocking and the possibility of breaking the place where the holder is installed.

There are so many phone holders for cars that you can’t immediately choose which one is best. Some of them are similar to each other, and some are radically different from their own kind. The last option is a magnetic ball made of steel and coated with a layer of treated aluminum. 3M® VHB™ bonding material is applied to the bottom of the ball base, which can provide a secure attachment to the surface of the dashboard. The bonding layer is absolutely harmless to the place where the holder is attached, so it can be removed without any problems.

The second element that is included in the design of this mount is a magnetic washer that remains on the ball base and holds the device using magnetic attraction. Thanks to it, it is possible to change the angle of inclination of the mount.

The third component is a metal plate that is glued to the phone using 3M® VHB™. It is she who is attracted to the magnetic ball and securely fixes the gadget in one position. The silicon core guarantees smooth gliding and a strong grip, thanks to which you can easily move your phone from vertical to horizontal position, while changing the angle of inclination.

If you don’t know how to attach a phone holder to a dashboard, or all the previously purchased devices did not meet your requirements, we recommend that you turn your attention to a completely new development in the field of such inventions. It is based on the capabilities of a powerful neodymium magnet. You need to install a special ring on your phone (tablet), and place the magnetic holder itself (made of metal) in the car. After this, as soon as the smartphone is near the mount, the magnet previously installed on its cover will be attracted to the holder and ensure tight contact with it. The rubber core promotes maximum contact between the two surfaces, guaranteeing comfortable rotation of the device by 360%.

Most often, this car phone holder is installed on the control panel, and its main advantage is the ease of mounting and further placement of the device. As for the disadvantages, the main one is the inability to move the stand multiple times across the dashboard (the material from which the mount is made is intended for one-time use).

Flexible phone panel

If you know well what a standard smartphone holder is, then when you see a flexible panel (mat), you will immediately understand that it is somewhat different from the usual devices. It does not need to be glued or secured to the instrument panel in any other way, because the material of manufacture (silicone) already allows it to stick to the interior trim. The stand comes with two cables: a base (with a USB connector) and a magnetic cable with micro USB and Lightning connectors.

The phone holders are installed on the mat, and a micro USB or Lightning connector coming from a magnetic cable is inserted into the smartphone itself. After this, you need to install the cable base in place.

The USB connector is connected to the charger, after which the mat is ready for use. There is an LED indicator on the base that will let you know when charging is starting. The smartphone is placed between the clamps, like on a stand. It is important that all buttons and connectors of the device remain open, and nothing interferes with its full use.

The position of the latches can be easily changed: the smartphone can be installed both horizontally (for example, for navigation) and vertically (for communicating with family and friends). You can also choose the most convenient viewing angle. This holder is a universal device, which means it is suitable for any smartphone, regardless of screen size.

Standard holders for a cell phone in a car do not always justify trust, which is why a more practical option is often universal mounts that can be converted to use another gadget within a few seconds. In this case, the phone is fixed in one of three ways:

Using magnets, which is not the best option for fixing, since the smartphone may periodically fall.

Using a cone clamp (a more reliable fastening option, just check how easy it is to get the phone out).

Using polyurethane legs that can be expanded to suit the size of a particular device. As in the previous option, problems may arise with removing the gadget. Of course, this method of attaching a smartphone is also not without its drawbacks, but at the same time it is a good alternative to non-universal holders.

A car phone mount can have a wide variety of shapes and designs, and often turns out to be a fairly simple device. This includes a mesh pocket in which the phone fits, just like in a regular trouser pocket. Such a device is often used not only to place a smartphone, but also for temporary storage of other small items (cigarettes, keys, etc.). The mesh pocket can be easily mounted on any flat surface by gluing it to it using double-sided tape.

How to secure your phone if there is no holder

If you decide not to buy a special device for fixing your phone in the car, or you still couldn’t figure out how to choose the right holder for your phone in your car, then we suggest you consider some options for fixing your phone using improvised means.

1. We use a rubber band. All that is required of you when using this method is to insert the elastic band between the “ribs” of the interior stove grille so that the phone can be placed in the two loops formed. Of course, part of the screen will be closed, but the smartphone will be securely fastened.

2. Buy a stationery clip (binder clip). Having bought a regular paper clip, you need to remove the staples from it, bend it and wrap it with thick thread. One part (clothespin) needs to be hooked onto the air duct and secured with an elastic band, and the second will be used as a fastener for the phone. The advantages of this method include the low cost of the product and ease of execution, but the disadvantage is the complexity of subsequent removal of the phone and the possibility of rough impact on the device body, since the thread does not always soften the load. You also won't be able to change the angle of the phone, and any attempts to do so may damage the air duct grille.

3. Use wire for fixation. For those who are ready to sacrifice the integrity of the panel for the sake of a good mount for their phone in the car, there is a method based on creating a wire holder. To do this you will need strong stainless steel wire and a drill. Using the prepared tool, you need to drill holes of a suitable diameter in the dashboard, after which you should bend the wire and insert it into these holes. Now all that remains is to hang the phone or tablet by the case.

Important!This mount is only suitable for tablets in a book case, but in this case the device is not always securely fastened. Moreover, it can easily block access to the radio.